Refine by
Xprt Applications For The Electronics And Computers Industry In Canada
20 applications found
Premium
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-a has been used as a guideline for control. Now a simple “on line” test for the relative measurement of ionic contamination has been ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
As technology advances, electronic devices and their components are becoming increasingly compact, making it challenging to examine their internal workings. To address this, we provide borescopes and cameras that aid in the inspection and the condition assessment of such devices and circuits. Our video borescopes allow visual examination of wiring, connections, or circuit boards, eliminating the need for expensive and time-consuming disassembly. Once within the device, you can direct the camera toward the specific ...
ByFIBERSCOPE.net based in Winnipeg, MANITOBA (CANADA)
Premium
The RoHS directive stipulates maximum limits for various hazardous substances in electrical and electronic equipment. Meeting the RoHS Directive requires reliable equipment and methods. As a leading manufacturer of precision instruments for chemical analysis, we are aware of these challenges. For this reason, Metrohm offers you not only the most advanced equipment, but rather complete solutions for the particular tasks at ...
ByMetrohm AG based in Herisau, SWITZERLAND
Premium
OEMs that manufacture wafer cleaning tools need mass flow meters and controllers with low pressure drop, precision mass flow control while at the same time are easy to use, have a small footprint, and come with a global support ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Few industries face the mounting challenges and scrutiny of expanding environmental compliance requirements, ecological mandates, consumer expectations and NGO watch groups as much as electronics and medical device manufacturers. Even before the Sony PlayStation cadmium crisis, the entire supply chain has been inundated by an ever-expanding myriad of legislation, ranging from the EU Directives on waste electrical and electronic equipment (WEEE), the restriction of hazardous substances (RoHS) and the Registration, ...
By3E - SDS and EHS Compliance Data Management Solutions based in Carlsbad, CALIFORNIA (USA)
The Kinitics Valve Actuator (KVA) delivers unmatched positional control and reliability to general purpose process control ...
ByKinitics Automation Limited based in Vancouver, BRITISH COLUMBIA (CANADA)
Consistent ultrapure water (UPW) production is critical for microelectronics manufacturing. SUEZ helps protect product yield, generate savings and improve environmental ...
BySUEZ Water Technologies and Solutions based in Trevose, PENNSYLVANIA (USA)
Aquafine UV systems are trusted by the biggest brands in the microelectronics market.UV Applications in Microelectronics: With over 900 installations in microelectronics fabs globally, Aquafine® Ultraviolet light (UV) systems have a strong global performance record and are trusted by the biggest brands in the industry. We understand the challenges faced in the design and construction of a system for microelectronics production and have the expertise to help with how to integrate with existing systems and ...
ByAquafine - a brand by Trojan Technologies based in Valencia, CALIFORNIA (USA)
Compliance with the RoHS and WEEE directives The Energy Dispersive X-ray Fluorescence (ED-XRF) spectrometers offer efficient solutions for the analytical requirements of the determination of regulated substances in electrical and electronic equipment according to the European Directive RoHS (Restriction of Hazardous Substances in Electrical and Electronic Equipment) and WEEE (Waste Electrical and Electronic ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
Water is fundamental to the manufacturing process in a semiconductor facility. Electronic components are rinsed or washed several times during the producing process with ultrapure water (UPW) to remove residue. Continuous monitoring of organic constituents (TOC) on the influent city water assist with UPW production. Good quality waste streams for the manufacturing process can also be monitored for reuse ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
Managing overall environmental control is essential for electronics manufacturing processes and operations as well as facilities like battery dry rooms that provide mission critical low dew point ...
ByMunters Corp based in Amesbury, MASSACHUSETTS (USA)
Enable advanced plasma processes control via highly accurate power delivery, frequency tuning, and multi-level pulsing. To manufacture leading-edge integrated circuits (ICs), new processes and materials are deployed for transistor or memory cell creation. Declining feature size and atomic-level precision make extreme process control essential. And new device architectures (3D-NAND and Fin FETs) drive multi-patterning (double and quadruple) demand — making innovative etch and deposition processes ...
ByAdvanced Energy Industries, Inc. based in Denver, COLORADO (USA)
Incredible advances in micro-miniaturization of electronic components, integrated circuits and microprocessors have benefited our world and will continue to produce new solutions and conveniences. These advances have resulted in extraordinary innovations, such as very powerful, compact computers, cell phones and various telecommunications devices. And these devices, though inconceivable just a few decades ago, are now common place ...
ByAdvanced Micro Instruments, Inc. (AMI) based in Costa Mesa, CALIFORNIA (USA)
Manufacturers of semiconductors, batteries, printed circuit boards, LEDs and other electronic components generate significant volumes of wastewater and aqueous waste contaminated with solvents, NMP, TMAH, ammonia and other organics that require off-site trucking and disposal. Many facilities have goals to eliminate off-site waste disposal. Axine can treat these streams on-site to reduce costs and risks, streamline operations and improve ...
ByAxine Water Technologies based in Vancouver, BRITISH COLUMBIA (CANADA)
Optimize performance, boost functionality, and decrease costs. Industrial electronics require high power quality thanks to equipment and process control sensitivity (e.g., factory automation equipment, semiconductor processing, etc.). As a power system designer, you're faced with changing safety regulations, greater performance and functionality demands, increased costs, and size reduction ...
ByAdvanced Energy Industries, Inc. based in Denver, COLORADO (USA)
There is no secret that in the EU, every sphere of the industry that concerns production falls under different regulations that concern waste exposure and recycled materials usage. When it comes to electronics, there are two directives that regulate the issues: RoHS and WEEE. They regulate the existence and concentration of harmful substances in various categories of production (RoHS) and responsibility for the proper recycling of electrical equipment (WEEE). These regulations can prevent appearance on the EU ...
ByElvatech Ltd. based in Kyiv, UKRAINE
Within the electronics industry manufacturers of ICs (integrated circuits), PCB and semiconductor devices use Carbolite bench top and floor standing ovens for a number of tests to prove their components. The Carbolite Peak series (PN Natural Convection Oven & PF Fan Convection Oven) as well as the GP General Purpose ranges of ovens are used at elevated temperatures over an extended period for burn-in and stress testing of components to detect faults. Carbolite ovens can accommodate both rack and shelf loading. ...
ByCarbolite Gero Ltd - part of Verder Scientific based in Hope, UNITED KINGDOM
The ARC-100 is a safe, reliable, and cost-effective technology that can be used to provide carbon-free electricity to small and large communities around the ...
ByARC Clean Technology, Inc. based in Saint John, NEW BRUNSWICK (CANADA)
ByMunters Corp based in Amesbury, MASSACHUSETTS (USA)
Particle Measuring Systems (PMS) has the application expertise and particle monitoring instruments with the industry leading sensitivity you need to reduce yield loss. Particle Measuring Systems PMS can provide you with particle monitoring solutions to determine how clean your semiconductor or microelectronics manufacturing is. By continuously counting particles when and where products (water, chemicals, air) are at risk, we provide the global expertise and high-performance laser particle counters you count ...
ByParticle Measuring Systems (PMS) based in Niwot, COLORADO (USA)