Refine by
Xprt Applications For The Energy Industry In Canada
65 applications found
Premium
Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Revolutionizing Electrical Vault Inspections with Innovative Camera Technology. Electrical vault inspections are inherently dangerous, time-consuming, and resource-intensive, particularly when conducted manually. RinnoVision is transforming the way electrical vault inspections are conducted by introducing advanced inspection technologies that enhance safety, efficiency, and accuracy. Traditional inspection methods often involve manual checks, which can be time-consuming, hazardous, and prone to human error. In ...
ByRinnoVision Inc. based in  Sainte-Marie, QUEBEC (CANADA)
Premium
Special remote visual inspection devices can be supplied for internal monitoring and inspection in critical environments, including extremely high temperatures. Delivering a suitable heat-resistant borescope depends on the specifications of your application, including correct cooling, the object to be tested, and the surroundings. Usually, the borescope insertion probe is exposed to high temperatures, and the body remains in the area outside. Therefore, the type of cooling depends on the temperature level. Cooling ...
ByFIBERSCOPE.net based in  Winnipeg, MANITOBA (CANADA)
Premium
The overall efficiency of thermal power generation inherently depends on the & cold-end of the cycle, where the waste heat is dissipated by the heat sink: The cooling system of the power plant. This actually is the part of a power plant where Brentwood supports its customers and partners with its rich product portfolio ranges from all dry air-cooled condensers (ACC) and Heller Technologies to all wet cooling towers and cooling tower components, as well as dry/ wet combinations with evaporative ...
ByBrentwood Industries, Inc. based in  Reading, PENNSYLVANIA (USA)
Premium
ByAnalytik Jena - Lab-loving people based in  Jena, GERMANY
Premium
Flow measurement in turbine intakes and for cooling ...
ByNIVUS GmbH based in  Eppingen, GERMANY
Premium
Measures to boost energy efficiency in industrial processes. Decarbonisation trends will change how industrial operators work – forcing end-users, technology licensors, and instrument manufacturers to continuously seek incremental and radical improvements to process ...
ByLAND® based in  Dronfield, UNITED KINGDOM
Premium
Precision allocation of flow energy costs. Imagine a central source for steam, natural gas, water and compressed air. In many large cities spread across the globe, Sierra provides the flow meters needed for precision allocation for fair billing of these utilities. Covering the whole range of air, gas, liquid, water and steam flow measurement applications, we manufacture vortex, ultrasonic and thermal flow meters for the district energy industry. ...
BySierra Instruments, Inc. based in  Monterey, CALIFORNIA (USA)
Premium
Minimize downtimes – increase safety and productivity! SWR is a versatile partner in the field of measuring systems for solids, that has extensive knowledge, experiences and skills in a wide range of applications. With our support, you will find reliable solutions that meet the requirements and standards of your industry. Our aim is to generate safe production processes. ...
ByENVEA based in  Poissy, FRANCE
Premium
Thermal treatment (e.g., annealing, tempering) of materials. Heat treating metals to enhance their metallurgical qualities necessitates high accuracy temperature measurement and control. In many of these processes contact temperature devices cannot be used. AMETEK Land provides accurate Non-contact solutions tailored to these ...
ByLAND® based in  Dronfield, UNITED KINGDOM
Premium
ByOptical Scientific Inc. (OSi) based in  Gaithersburg, MARYLAND (USA)
Premium
Combined heat and power (CHP) generation processes. Cogeneration plants generate both electricity and usable heat. This is a more thermally efficient process than generating electricity only. Many of the solutions for other power applications apply equally to cogeneration ...
ByLAND® based in  Dronfield, UNITED KINGDOM
Premium
Transition to low-carbon energy sources in industry. CO2 emissions can be reduced or even eliminated by replacing fossil fuels with biofuels, and waste-derived fuels, or through electrification. Already common in some markets, this trend is likely to accelerate as the goal of net-zero carbon is ...
ByLAND® based in  Dronfield, UNITED KINGDOM
Premium
From solar, hydro and geothermal to nuclear, Sierra has a solution. Covering the whole range of air, gas, liquid, water and steam flow measurement applications, we manufacture vortex, ultrasonic and thermal mass flow meters for the power and energy industry. ...
BySierra Instruments, Inc. based in  Monterey, CALIFORNIA (USA)
Premium
OPSIS offers monitoring systems for continuous emissions monitoring and process control at power plants. The systems meet and exceed high demands on availability, speed, versatility, and low operating ...
ByOPSIS AB based in  Furulund, SWEDEN
Mines and Energy plants are zones that leave a large impact on the environment which is why these companies require analysis about the watershed. This is why Earthfx Inc. has an important role in the creation of these projects. As well it ensures the project does not have as large an impact on the environment. See some of the projects we have done ...
ByEarthfx Incorporated based in  Toronto, ONTARIO (CANADA)
Chilled or white cast iron is normally used for precipitator tanks which collect high speed fly ashes from the boilers in thermal power stations. These tanks suffer from severe wear by erosion and require frequent replacement. A longer service life solution, which is also more economic, has been found by inserting CDP® 4666 welded wear plates and joining them with EutecTrode XHD ...
ByCastolin Eutectic GmbH based in  Kriftel, GERMANY
Monitoring, reporting & control solutions for power failures ...
ByGuardian Telecom Ltd. based in  Calgary, ALBERTA (CANADA)
New waste separation techniques are being implemented, and R&D programs focus on much more than waste-technology alone. The importance of biomass is recognized as a potential high-energy source for electricity and biogas. DMT’s ambitious approach is based on the principles of circular economy and cradle to cradle: waste products are in fact very valuable. We constantly investigate new ways in which to approach ‘waste’ from a different ...
ByDMT Environmental Technology BV based in  Joure, NETHERLANDS
APAT provides a complex multi-layer system of hardware/software components and communication technologies that aim to gather heterogeneous data from different sources (e.g. consumers, suppliers, distribution and transmission systems) and act upon these data. In other words, this solution enables various assets (e.g. devices, software packages, web services, and user portals) to communicate with each other based on standard protocols. It is designed to address the high-level requirements of modern energy ecosystem. ...
ByAPA Technologies based in  Markham, ONTARIO (CANADA)