Refine by
Xprt Applications For The Textile Industry In Europe
35 applications found
Premium
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
Non-woven materials production (e.g., textiles, fabrics). Non-woven fabrics are laminated by chemical, mechanical, solvent or hot glues. These often require precise temperature measurements to ensure an efficient process and high-quality ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
The Textile industry is a water intensive industry. Rising water costs due to increasing water scarcity and more stringent environmental regulations have lead to textile companies globally to seek advanced, innovative and efficient textile wastewater treatment solutions to assist them to reduce their water footprint, decrease operational cost and maintain regulatory compliance. Therefore, sustainable water quality management and conservation through water reuse strategies are increasingly becoming critical to the ...
ByGenesis Water Technologies, Inc. based in Maitland, FLORIDA (USA)
PROCESS INFORMATION: In a plant making Terephthalic Acid (a constituent for the production of Polyester fibres) the silos or hoppers which are filled by mechanical or pneumatic conveying of the material. Raw material (C.T.A.) feed silos in the preparation section empty into the mixing process, and finished product (P.T.A.) silos are discharged to bagging stations. The filling and emptying of these silos generated vent gas which has to be treated before going to ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
3mesh spacer fabric guarantees perfect air distribution – even under pressure. In addition the perfect adjustment to every contour increases the comfort. Therefore 3mesh is used everywhere, where perfect comfort or soft touch is requested: in climatic and ventilated seats, seat covers, head liners, instrument and door panels as well as in composite constructions and invisible airbag ...
ByMüller Textil GmbH based in Wiehl Drabenderhöhe, GERMANY
Fabrics fall into two broad categories wovens and nonwovens. A woven is a cloth formed by weaving. Wovens only stretch in the bias directions unless the threads are elastic. Nonwoven fabrics are broadly defined as sheet or web structures bonded together by entangling fiber or filaments created by mechanical, thermal, or chemical ...
ByApplied Rigaku Technologies based in Cedar Park, TEXAS (USA)
Derypol, with more than 50 years of experience manufacturing resins and polymers, has the technology and experience necessary to develop products with applications in very diverse markets, such as textiles, tanning, construction, ...
ByDerypol, S.A. based in Barcelona, SPAIN
Around the world, the Proll & Lohmann brand of EZM Edelstahlzieherei Mark – P&L for short – is a synonym for leading technology in the production of textile finishing machines. COLORMAT and COLORCOMBI are the brand names under which EZM produces drum dyeing machines that stand for top performance when it comes to dyeing textiles ranging from hosiery and seamless knitwear, all the way to bath mats. The innovative technology of our drum dyeing machines decisively improves the quality and ...
ByEZM Edelstahlzieherei Mark Gmbh based in Wetter, GERMANY
There are many cleaning applications in textile manufacturing and industrial textile laundering. In textile factories, manufacturing equipment, accessories, water recycling system filters, and wastewater filters must all be cleaned and maintained in order to keep the plant running efficiently. Minimizing downtime, by using the safest, most economical and environmentally friendly products that clean effectively, is critical. Returning filter system flux rates back to 100% is also important and can be accomplished ...
ByInternational Products Corporation based in Burlington, NEW JERSEY (USA)
To separate solids from liquids, nonwoven or woven fabrics out of animal or vegetable fibers are used, and synthetic fibers are now in use since several decades. In cross-flow filtration the filtrate is recuperated transversely to flow direction through a porous wall layer. In classic filtration, a filter cake is built up on filter surface and this cake reduce the flow of filtrate which will depend of the cake permeability. Often it needs such a cake structure build-up in order to obtain a clear filtrate. The ...
ByBucher Unipektin AG based in Niederweningen, SWITZERLAND
Concentrating of fixer, developer and bleaching baths. Concentrating of pressure roller and frame washing water. Concentrating and recovery of colour and printing pigments from washing water. Concentrating and recovery of organic contaminants from polluted waste water. Concentrating of adhesives or glue from washing ...
BySCHELL GmbH & Co.KG. based in Telfs, AUSTRIA
The kind of waste water from tanneries has a high salt content that can be diluted, but is hard to eliminate. They can also have a high organic load due to the high dirtiness, including blood, sand and manure. The water itself from these industries can vary a lot from a company to another depending on its actividad. However, a common characteristic is the high content of materials in suspension due to fibres and precipitated ...
ByAguambiente based in La Cistérniga, SPAIN
SSI manufactures a variety of low-speed, high-torque 1, 2 and 4-shaft shredders specially suited for size reduction of plastics and textiles. SSI has many shredders installed in plastic processing applications ahead of granulators to downsize bulky, difficult to manage or compressible materials before additional processing and recycling. We also have many shredders employed converting plastic materials into usable fuel sources for ...
BySSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA)
The mercerisation of cotton materials yields large quantities of weak caustic soda. Recovery of mercerising lye by means of our Körting evaporation technology developed specially for this process results in an immense saving of costs and a minimised impact on the environment. When combined with a specially co-ordinated lye cleaning system the result is a nearly 100% recovery of ...
ByKörting Hannover AG based in Hannover, GERMANY
In several textile based applications our polymer solutions can offer high potential to make these compostable and/or increase the biobased ...
ByPycnoPlast based in Eindhoven, NETHERLANDS
Developing a sustainable approach to the disposal of textile and dyeing wastewater is a fundamental industry challenge. Textile effluents contain various chemicals used in the production process and material pollutants, such as fibre, protein and other soluble organic pollutants. Higher costs are associated with the decomposition of any dye remaining in the effluent, due to the large size of dye molecules and their low biodegradability. ...
ByWoxford Environmental Technologies (UK) Ltd. based in Headington, UNITED KINGDOM
Textile industries are water-intensive and large amounts of water are used in textile manufacturing processes. Almost all dyes and chemicals are applied to textiles in water baths. Preparation steps such as desizing, washing, bleaching and mercerizing generally use aqueous systems. The importance of water in textiles is noted by the textile industries in India and China, their use of local water supply, and the mixing of untreated wastewater, which is composed of fats, oils, colors and other chemicals added in a ...
ByZetaş Kimya based in Ostim OSB/Yenimahalle, TURKEY
Solar thermal energy is an ideal energy source for a range of processes in textile production, enabling substantial cuts in energy costs and CO2 emissions. More and more textile producers are investigating the possibilities with solar thermal energy to increase both profitability and sustainability. Textile production processing consumes substantial amounts of energy, most of it as low to medium temperature heat, making it a perfect fit for solar thermal energy. ...
ByAbsolicon Solar Collector AB based in Härnösand, SWEDEN
Cotton, wool, industrial textile waste, rags, ...
ByITS - Shredding & Grinding Solutions based in Cesano Boscone (MI), ITALY
Industrial incineration solutions for the textile manufacturing ...
ByDutch Incinerators BV (DI) based in Hoek/Terneuzen, NETHERLANDS