Refine by
Xprt Applications For The Glassware Industry In Spain
12 applications found
Premium
Glass tempering (toughening) and bending processes. Toughened (tempered) glass is glass that has been heat treated to increase its strength. Tempered glass is harder to break, and crumbles into small chunks instead of jagged ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Specialty glass production (unique compositions or uses). Speciality glass is a wide-ranging term encompassing glass with non-standard constituent materials, or glass that undergoes special treatment to make it suitable for a particular application. ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Glass tableware (dishes, glasses) manufacturing. Glass tableware requires consistent product quality for regular use, and may need a high standard of manufacture for decorative purposes. This quality is dependent on temperature control at critical ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Glass fiber and mineral wool insulation production. Fibreglass is made from melted glass spun at high speed to create fibres. Rockwool (also called mineral wool) is created in the same way, using melted rock. Both have excellent insulation ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
ByENVEA based in Poissy, FRANCE
Premium
The high temperatures in glass manufacturing can make it difficult to monitor gas concentrations for process control and emissions monitoring. However, OPSIS offers monitoring systems that handle the high temperatures in an excellent way. ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Glass for buildings; flat glass manufacturing. Architectural glass is used as a building material, typically for windows, furniture or internal partitions. It often needs to be tempered or laminated to ensure safety, or bent to fit application ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Flat glass (float glass) manufacturing. Flat glass is manufactured by allowing it to solidify on a layer of higher-density liquid, usually molten tin. This process is used to create clear, tinted and coated ...
ByLAND® based in Dronfield, UNITED KINGDOM
Glass and ceramic furnaces are typically associated with emissions of very fine particles (less than 5µm) in combination with high temperatures and load. An increasingly higher number of furnaces are powered with biomass fuel, further raising the level of particulate emissions that need to be treated, in order to comply with stricter regulatory limits. Solving this problem may or not require a two stage dedusting system such a cyclone pre-separation system followed by an ESP. Client's needs ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Eliminating blockages and concretions in storage units and gas lines and flue gas treatment, loading and batch preparation. Our air cannon solutions are used to remove blockages and concretions in storage units and gas lines and to treat flue gases, loading and batch ...
ByStandard Industrie based in Roubaix Cedex 1, FRANCE
Technical ceramics covers a wide range of advanced ceramic materials developed for their excellent mechanical, electrical and thermal properties. They are often highly resistant to melting, bending, stretching, corrosion and wear. The use of advanced ceramics in aerospace, automobile, defence and energy markets is becoming increasingly widespread. Carbolite Gero furnaces are widely used in both research and production for the debinding and sintering of technical ceramics. For the debinding process (of green parts) ...
ByCarbolite Gero Ltd - part of Verder Scientific based in Hope, UNITED KINGDOM
The installation of suitable installation material in buildings is a cost effective way to reduce energy costs. The manufacture of insulation from minerals or mineral products, such as glass. Recycling glass to form insulation materials is another way to keep the process ...
ByProtea Limited based in Middlewich, UNITED KINGDOM