AnalytiChem products

CONOSTAN - Lubricant Condition Monitoring Standards

In 1999, a new calibration procedure (ISO 11171) for automatic particle counters was introduced, rendering previous procedures (i.e. ISO 4402) obsolete. With the new, recently updated (2010) procedure, secondary calibration requires a fluid tracable to NIST SRM 2806 - a suspension of 3.3 mg/L of ISO medium test dust in super-clean hydraulic fluid. CONOSTAN® offers a full range of cost-effective products for the periodic calibration and verification of automatic particle counters, as per Clause 6 and Annexes A through E of ISO 11171. Partistan™ secondary standards are compliant with ISO 11171 and directly tracable to NIST SRM 2806.

PlasmaPure - Acids

PlasmaPUREacids are manufactured with trace metals equal to or less than 1 ppb. Used for environmental and industrial applications in ICP-AES and flame atomic absorption spectroscopy. Complete with a Certificate of Analysis with lot number, expiry date, & maximum specification for over 60 analytes:Complete documentation for audit purposes. Refined for low trace metals analysis, 2 expiry dates (up to 3 years unopened and 15 months opened): Long shelf life for unopened bottles.

EasyPREP - Model COD-200 - Automated Chemical Oxygen Demand Analyzer

This, all-in-one, unattended COD analysis system automates the mixing, heating, cooling and analysis of COD samples. COD tubes are placed in a digestion block for sample digestion, followed by shaking and cooling. They are then transferred to the spectrophotometer where sample are analyzed. The measurement activity and concentration calculations are displayed in real-time on the screen.

EasyPREP Soil Analyzer - Automated pH/EC Analyzer

The EasyPREP Soil Analyzer is a multi-parameter Robotic Soil Analyzer System. The system includes software and hardware to perform pH and electro conductivity measurements in a variety of vessels. Up to 3 point pH calibration and 2 point EC calibration. Analyze and mix up to 4 samples simultaneously. System has one temperature measuring probe for each set of up to 4 pH/Conductivity probes. Dual pumps for each pH electrode, one for each reagent. System built to work in a corrosive environment. Housing and components are acid resistant. Stepper motor peristaltic pump with better than 0.5% accuracy in delivery at 1 ml. Ability to save and recall the defined Methods for fast setup of routine operations. Bar-code reader optional accessory allows sample ID to be loaded quickly. GPS location of the exact sample location can be programmed in the software. Transfer sample ID from other platforms. Quick referencing and tracking of results.

Autosampler Tubes

SCP-Science - Model DigiTUBEs-750 - 010-500-263 - 50ml Non Rack Lock Autosampler Tube w/caps

Recognized as the best disposable digestion vessels on the market. Manufactured using virgin polypropylene, verified for leachable metals by ICP-MS. Low leachable catalytic/additive metal content, excellent visibility and good acid resistance are guaranteed.

SCP-Science - Model 010-510-050 - Autosampler Rack, 12 pos, 50ml Tubes

Compatible autosampler racks for CETAC, Gilson and SPECTRO autosamplers. Convenience of using 50 ml DigiTUBES as autosampler tubes to eliminate sample transfer. Custom racks for your autosampler are available.

Chemicals & Reagents - BOD Reagents

SCP-Science - Model 250-110-100 - Buffer pH 7.2 (Phosphate) for BOD

Unit of measure: 500ml. AccuSPEC standards and reagents for BOD, COD, and TOC are prepared following guidelines from "Standard Methods for the Examination of Water and Wastewater", 20th Edition. They are available in custom sizes and custom concentrations in order to reduce cost and maximize productivity.

SCP-Science - Model 250-110-101 - Buffer pH 7.2 (Phosphate) for BOD

Unit of measure: L. AccuSPEC standards and reagents for BOD, COD, and TOC are prepared following guidelines from "Standard Methods for the Examination of Water and Wastewater", 20th Edition. They are available in custom sizes and custom concentrations in order to reduce cost and maximize productivity.

Chemicals and Reagents - Fusion Fluxes

SCP-Science - Model 040-060-100 - 1 kg Pure Lithium Metaborate

Unit of measure: kg. AccuSPEC fusion fluxes are supplied dust free, in homogeneous spherical vitreous particles with less then 0.05% moisture. Choose from a variety of fused fluxes or request a custom blend for your application. Used by cement labs, catalyst and ceramic manufacturers, glassmaking and mining industries, metal producers & R&D laboratories.