Mextech products

This is an Analog Clamp Meter. This instrument can be used to measure, AC/DC Voltage, AC Current, Resistance, Temperature.

Although this ANEMOMETER is a complex and delicate instrument, its durable structure will allow many years of use if proper operating techniques are developed. This is to be used for HVAC Applications and Air Ducts.

The Barcol hardness can be calculated according to the following formula. Hba =100-h/0.0076. Hba – ( Barcol Hardness Value ). h – ( Indentation depth mm). 0.0076(The indentation depth characterizing a single barcol unit.

The Barcol hardness can be calculated according to the following formula. Hba =100-h/0.0076. Hba – ( Barcol Hardness Value ). h – ( Indentation depth mm). 0.0076(The indentation depth characterizing a single barcol unit.

In automobile ignition system, the high voltage ignition coil generates a high voltage, and the spark plug diverts it, from high tension ignition coil into the cylinder engine, spark between the spark plug electrodes will ignite the mixture. The Detector could tell the good spark plugs from the bad by the strength of the spark.

MEXTECH 23B Brake pressure was transmitted by brake fluid, the pressure transmission will out of function once brake fluid including too much water. In order to safe-driving, we must test water ratio scale in brake fluid regularly. The brake fluid tester help us do current maintenance; make sure we drive in safety condition.

MEXTECH BT369 (12V, 24V) Automotive battery tester is used for testing the following condition of battery, Cranking system and charging system. The Tester gives the reading by a large and high resolution LCD display. It comes with built in printer.

Display: 3 ½ Digits. Four Measuring Units : pf, nf, μ F, mf. Low Battery Indication,. Data Hold Function. Fuse Protection. Zero Adjustment knob for all Ranges. Backlight (Automatic Shutdown after 10 Seconds). Power Supply: 1×9 Volt Battery. Display Size : 64 X 35 mm. Unit Size : 185 X 90 X 53 mm.