S3 Instruments products

Industrial thermometer with Bimetal measuring system Worksstandard page 1.0.

Design Features: All Stainless Steel Construction. Hermetically Sealed (ASME B40.3). Accurate to 1% Full Scale. Standard External Reset. Silicone Fillable for Vibration Resistance.

Chemical & Building materials industry: White Cement (powder), Paint (pasty), Coating (pasty), Plastic(boards), Steel Plate (boards), Ceramics (powder),Gypsum (powder), Wallpaper (paper/sheet), Porcelain Enamel (powder), Calcium Carbonate (powder),etc.

Application: This instrument based on the principle of photoelectric effect & D65 light source (R457) and with 0/d or d/0 as a illumination condition. Meanwhile, except solution or liquid samples, this instrument can be widely measured the whiteness value of any substances.

Application: This instrument based on the principle of photoelectric effect & D65 light source (R457) and with 45/0 as a illumination condition. Meanwhile, except solution or liquid samples, this instrument can be widely measured the whiteness value of any substances. Such as: powder, board, paper, paste, sheet, clay, etc.

Single wafer processing clean heat treatment system. This system provides clean heat treatment in different atmospheres of vacuum, N2, H2 or other gases. It is also an automatic cassette-to-cassette processing unit, a perfect fit to annealing, alloying and other treatments of wafers after deposition.

Features: Reduces oxides in the solder by irradiating hydrogen radicals having strong reducing power generated in H2 plasma when heating and melting solder bumps in order to enable formation of pure bumps.

Feature: Provides quick heating and quick cooling processing works through direct heating by hot plate and special cooling mechanism so that optimal reflow conditions will be achieved. Reduces oxides of solder sheet and pad non-flux processing, with the whole stroke maintained in a H2 reduction atmosphere or anti-oxidation atmosphere to ensure excellent wettability. Eliminates voids by performing deaeration in vacuum during the process of solder melting.

Features: Measurement by color image processing has been automated so that variation in measurements is reduced. Measurement data and image data can be recorded easily. Glass torsion can be observed in sensitive tints.

Features: Allows direct reading of inner diameter inside on the graduated screen. Models ST-200H , ST-205LT : 20× lens is supplied for standard. The φ200mm screen is designed small and simplified. Halogen lamp and high accuracy projection lens are used to project extremely sharp images. Dedicated jig will enable the user to carry out inspection with one-touch operation if the product is installed in the user\`s bearing manufacture line.