Depth Level Meter

A.YITE TECHNOLOGY GROUP http://www.ayite.net http://www.ayite1973.com Email: [email protected] Level & Depth A.YITE INSTRUMENT CORP H ttp : / / w w w. ay i t e . n e t Ultrasonic Sludge Interface Level Meter Portable Ultrasonic Echo Depth Meter Explosion-Proof Ultrasonic Level Meter Ultrasonic Level Meter Ultrasonic Differential Level Meter A.YITE TECHNOLOGY GROUP http://www.ayite.net http://www.ayite1973.com Email: [email protected] GE-102S Ultrasonic Sludge Interface Level Meter GE-102S-A GE-102S-B The GE-120S level meter is specially designed to measure the interface for sludge, it could be continual and online to monitor the sludge interface leve in the sewage wastewater treatment field. This Sludge Level Meter could measure the position and height of sludge by the principle of ultrasonic echo, it will be real-time to monitor the thickness and depth of sludge, and to control the progress online. Then it could avoid the water quality deterioration and sludge denitrification & digestion. This Sludge Interface Level Meter have perfect function to measure the depth, and control, data tranmit, communication, with depth data output via an RS485 serial port, or 4~20mA output. It is widely used in the sewage sedimentation tank, primary settling tank, secondary sedimentation tank, sludge thickening tank, very useful in the building of waterworks, ore washery, sewage treatment. Technology Specification: * Level Range: 1m ~ 5m ~ 10m (5m is standard, more than 10m need custom-made) * Accuracy: 0.8% * Blind Spot: <500mm * Draft Depth: 500mm * Detection Method: 1HZ/s (0.1~100HZ/s is available) * Wave Beam angle: 10±2 degree * Work Frequence: 100KHz~300KHz (Different transducer will be different) * Output: 4~20mA (Standard, 1~5V and RS485 is available) * Power Supply: 110VAC ~ 240VAC 50HZ/60HZ (220V50HZ is standard) * Protect Grade: IP65 A.YITE TECHNOLOGY GROUP http://www.ayite.net http://www.ayite1973.com Email: [email protected] Data for Transducer: * Work Medium: Sewage * Work Temperature: 0~40C (higher temperature need custom-made) * Cable Length: 10m (GE-102S-B is 1.0m) Data For Tester Terminal: * Power Supply: 110VAC ~ 240VAC 50HZ/60HZ (220V50HZ is standard) * Display: LCD Screen * Resolution: d=1mm or 1cm(setting by user) * Keyboard: three slight touch key * Work Temperature: 0C ~ 50C * Storage Temperature: -20C ~ 70C * Work Humidity: <80% RH * Storge Humidity: 70% RH Installation: When install the transducer, please consider the protection for transducer. Put the cable through the pipe at first, then connect the pipe with the transducer, avoid the force to the cable, then avoid the rending for the cable. if rupture the cable, the transducer will be destroyed. A.YITE TECHNOLOGY GROUP http://www.ayite.net http://www.ayite1973.com Email: [email protected] GE-103P Portable Ultrasonic Echo Depth Sounder Meter The Portable Echo Sounder is a low cost ultrasonic water depth instrument meter, which is used for measuring water depth in silting or sedimentation studies, dredging surveys in lakes, rivers, ports, sea, and inshore hydrographic surveying. These are also applicable in testing aid for electronic servicing, research and development, education, etc. The instrument can be used as a conventional echo sounder with depth data output via an RS485 serial port, or 4~20mA output. This depth meter adopt the ultrasonic principle, have perfect function to measure the water depth, and control, data tranmit, communication. The unit is sold as a complete package and includes transducer, handheld terminal, internal battery charger, and protect box. Specification: * Depth Range: 5m~50m~100m (500m max) * Accuracy: ±0.4% (20C water temperature) * Blind Spot: < 2%~5%FS * Draft Depth: >500mm * Detection Method: 1HZ/s (0.1~100HZ/s is available) * Wave Beam angle: 18±2 degree * Work Frequence: 50KHz~200KHz (Different transducer will be different) * Output: 4~20mA (1~5V and RS485 is available) * Power Supply: Built-in Lithium battery, work more than 6 hours * Battery Charger: 110VAC ~ 240VAC 50HZ/60HZ * Work Medium: Water (If Sea Water, please declare it) * Weight: 3KG (without protect box) A.YITE TECHNOLOGY GROUP http://www.ayite.net http://www.ayite1973.com Email: [email protected] Handheld Terminal: * Display: LCD, Multi-data, Four-digit number for dapth * Resolution: d=1mm or 1cm(setting by user) * Keyboard: five slight touch key * Work Temperature: 0C ~ 50C * Storage Temperature: -20C ~ 70C * Work Humidity: <80% RH * Storge Humidity: 70% RH * Dimension: 235mm X 115mm X 70mm * Power Supply: Built-in Lithium battery, work more than 6 hours Transducer: * Work Medium: Water (If Sea Water, please declare it) * Work Temperature: 0C ~ 40C * Cable: 10m Battery Charger: 110VAC ~ 240VAC 50HZ/60HZ A.YITE TECHNOLOGY GROUP http://www.ayite.net http://www.ayite1973.com Email: [email protected] GE-1201 Ultrasonic Level Guage Meter (2 line) GE-1201 compact ultrasonic level transmitters are designed to measure liquid and solids levels, up to a range of 15 meters. The range can be configured by the keyboard and display. The level meter is mounted on top of the vessel or tank. The microprocessor sent an electronic pulse, then the transducer converts it into an acoustic pulse. The pulse travels to the level that is being measured and reflected back to the transducer. The transducer then converts its energy back into an electronic signal and stops the counter in the microprocessor. Knowing the speed of sound through the air, then it can accurately determine the distance. Specification: 1. Output: 4-20mA 2. Voltage: DC24V ( 24V ~ 30V ) 3. Diaplay: Four-digit number for level 4. Level Range: 5m ~ 10m ~ 15m 5. Accurancy ±0.25% 6. Temperature: -25C ~ 65C 7. Resolution: d=1mm 8. Protect Class IP65 GE-1202 Ultrasonic Level Guage Meter(4 line) GE-1202 compact ultrasonic level transmitters are designed to measure liquid and solids levels, up to a range of 15 meters. The range can be configured by the keyboard and display. The level meter is mounted on top of the vessel or tank. Specification: 1. Output: 4-20mA or RS485 2. Voltage: DC24V ( 24V ~ 30V ) 3. Control: 2 Relay, programmable, control for high & low limit 4. Level Range: 5m ~ 10m ~ 15m ~ 20m 5. Accurancy ±0.25% 6. Temperature: -25C ~ 65C 7. Resolution: d=1mm(Level Range < 10m); d=1cm (Level Range > 10m) 8. Protect Class IP65 A.YITE TECHNOLOGY GROUP http://www.ayite.net http://www.ayite1973.com Email: [email protected] GE-1202E (Explosion-Proof) 1. Output: 4-20mA RS485 2. Voltage: DC 12V ~ 24V 3. Control: 2 Relay, programmable, control for high & low limit 4. Level Range: 5m ~ 8m~10m ~ 12m 5. Accurancy ±0.25% 6. Temperature: -25C ~ 65C 7. Resolution: d=1mm 8. Protect Class IP66 9. Anti Corrosion & Anti Explosion GE-1203 Ultrasonic Level Meter (Separated Body) GE-1203 compact ultrasonic level transmitters are designed to measure liquid and solids levels, up to a range of 40 meters. The range can be configured by the keyboard and display. The level meter is mounted on top of the vessel or tank. The microprocessor sent an electronic pulse, then the transducer converts it into an acoustic pulse. The pulse travels to the level that is being measured and reflected back to the transducer. The transducer then converts its energy back into an electronic signal and stops the counter in the microprocessor. Knowing the speed of sound through the air, then it can accurately determine the distance. Specification: 1. Output: 4-20mA or RS485 2. Voltage: AC220V; DC24V 3. Control: 4 Relay, programmable control for high & low limit 4. Level Range: 5m ~ 10m ~ 15m ~ 20m (40m is available) 5. Accurancy ±0.25% 6. Temperature: -25C ~ 80C 7. Resolution: d=1mm(Level Range < 15m) d=1cm (Level Range > 15m) 8. Protect Class IP67 A.YITE TECHNOLOGY GROUP http://www.ayite.net http://www.ayite1973.com Email: [email protected] GE-1204 Ultrasonic Differential Level Meter GE-1204 compact ultrasonic level transmitters are designed to measure liquid and solids levels, up to a range of 20 meters. The range can be configured by the keyboard and display. The level meter is mounted on top of the vessel or tank. The microprocessor sent an electronic pulse, then the transducer converts it into an acoustic pulse. The pulse travels to the level that is being measured and reflected back to the transducer. The transducer then converts its energy back into an electronic signal and stops the counter in the microprocessor. Knowing the speed of sound through the air, then it can accurately determine the distance. Because it have 2 transducer, then it could calculte the difference between the 2 measure result. Specification: 1. Output: 4-20mA or RS485 2. Voltage: AC220V or DC24V (110VAC is available) 3. Control: 4 Relay, programmable 4. Level Range: 5m ~ 10m ~ 15m ~ 20m 5. Accurancy ±0.25% 6. Temperature: -25C ~ 80C 7. Resolution: d=1mm(Level Range < 15m) 8. Protect Class IP67 GE-130 series Level Sensor / Float Switch 1. Max Contacting Rate: 10w?50w, 70w?100w?250w 2. Max Switching Voltage: =24VDC, =100VDC, 110VAC, 220VAC 3. Max Switching Current: 0.5A, 0.7A, 1.0A, 1.5A, 2.0A, 3.0A, 4.0A 4. CE ROHS ISO9001 ISO14001 OHSAS18001 standard Custom-made is Welcome A.YITE TECHNOLOGY GROUP http://www.ayite.net http://www.ayite1973.com Email: [email protected] GE-1305 Level Sensor / Float Switch GE-1306 Stainless Steel Level Switch GE-1307 Plastic Level Float Switch GE-1308 Plastic Level Float Switch GE-1309 series Stainless Steel Level Switch / Float Switch