PermeOx Plus Technical Data Sheets

FMC Corporation Chemical Products Group Environmental Business 1735 Market Street Visit our E-Commerce Site at Philadelphia, PA 19103 http://www.fmcchemicals.com Phone: 1-866-860-4760 NOTICE The information contained herein is, to our knowledge, true, and accurate. However, we make no warranty or representation, expressed or implied, except that FMC products discussed herein conform to the chemical description shown on their labels. Nothing contained herein shall be construed as permission or recommendation to infringe any patent. No agent, representative or employee of this company is authorized to vary any of the terms of this notice. PermeOx???? Plus CAS NO 1305-79-9 ____________________________________________________________________________________ Introduction PermeOx? Plus is an economical, viable and effective oxygen-generating compound for use in odor control, metals removal and bio-remediation. PermeOx? Plus is a passive, in situ approach to providing an oxygen source for bio-remediation. Successful bio-remediation depends on proper mix of nutrient, oxygen, and microbes. Often the limiting factor of aerobic degradation of contaminants is oxygen availability. PermeOx? Plus is designed for slow releases of oxygen over the pH range of 4 to 9 so that indigenous aerobic microbes may utilize the organic containments as a source of nutrient. ____________________________________________________________________________________ Formula CaO2 MW 72 ____________________________________________________________________________________ Description Off white granular solid ____________________________________________________________________________________ Specifications Calcium Peroxide, wt% 75 min Active Oxygen, wt% 16 min Other Ingredients, wt% 25 max ___________________________________________________________________________________ Uses Bioremediation Petroleum hydrocarbon remediation Creosote remediation Partially halogenated hydrocarbon remediation ____________________________________________________________________________________ Typical Properties Solubility Slightly soluble in water Soluble in acid pH of a 1% slurry at 25 degrees C., approximate 11.4-12.5 Loose Bulk Density, approximate lb/cu ft 27 Color Off white Odor None Reaction: CaO2 + 2H2O ? Ca(OH)2 + ½ O2 + H2O ___________________________________________________________________________________ Standard Containers FMC Corporation Chemical Products Group Environmental Business 1735 Market Street Visit our E-Commerce Site at Philadelphia, PA 19103 http://www.fmcchemicals.com Phone: 1-866-860-4760 NOTICE The information contained herein is, to our knowledge, true, and accurate. However, we make no warranty or representation, expressed or implied, except that FMC products discussed herein conform to the chemical description shown on their labels. Nothing contained herein shall be construed as permission or recommendation to infringe any patent. No agent, representative or employee of this company is authorized to vary any of the terms of this notice. Fiber Drums, polyethylene lined 100 lbs (45.25 kg) ____________________________________________________________________________________ Shipping PermeOx? Plus is shipped in the above standard containers. It is classified by DOT as “Oxidizer - 5.1” and containers carry the yellow oxidizer label. ____________________________________________________________________________________ Safety/Handling/Storage PermeOx? Plus is one of the safest to handle of the peroxygen compounds. It represents no significant hazards with regards to skin contact, absorption, inhalation, or ingestion. Airborne dust is irritating to eyes, nose, throat, and lungs. PermeOx? Plus should be handled in well ventilated, dust controlled areas. When handling large quantities, the use of dust mask, goggles, and gloves is recommended. PermeOx? Plus is an oxidizer, thus contact with combustible materials (paper, cotton, organics, wood, leather, reducing agents, and other oxidizers) should be avoided. PermeOx? Plus is not flammable but will contribute oxygen to feed a fire. Contamination, heat, and humid conditions will enhance and accelerate decomposition. Fires involving calcium peroxide are best controlled by using large quantities of water. However, unlike most oxidizers, decomposition is endothermic. PermeOx? Plus should be stored in a clean, dry place. Do not expose to heat sources or high humidity. Store away from combustible materials. Keep containers closed when not in use. Handle spills by dilution with water. (Refer to the MSDS for more detailed information) ____________________________________________________________________________________ Customer Service To place orders, request samples or obtain general information, please call the marketing office or visit our website at www.fmcchemicals.com FMC Corporation Active Oxidants Division, Environmental Business 1735 Market Street Philadelphia, PA 19103 Tel 866-860-4760 For technical assistance, please call one of the offices below. Applications and Chemistry of Peroxygens Systems for Storage and Handling FMC Research and Development Center FMC Technical Services and Engineering Chemical Products Group Tonawanda, NY 14240 Princeton, NJ 08543 (716) 876-8306 (609) 951-3657 ____________________________________________________________________________________ CAS NO 1305-79-9