TSBA Data Sheet

Data Sheet10/10-3.61 ENFieldResistance thermometer TSBA (SensyTemp BA R)for building automation, machine constructionand environmental engineeringIT¦ Different output signals– Pt 100 signal– 4...20 mA, temperature linear, analog– 4...20 mA, HART protocoll (on request)¦ Short response time¦ Models for intrinsic safe circuits available¦ High operational reliability– Long term stability– Maintanance freeResistance thermometer TSBA (SensyTemp BA R) 10/10-3.61 ENfor building automation, machine construction and environmental engineeringGeneral descriptionThe product range presented in this catalog is a special selectionadapted to the specific requirements of building automation,machine construction and environmental engineering. It is a 2result of both our close co-operation with our customers and ourexperience gained over years in the field of temperature mea-surement and process control instrumentation. The transmitter is installed directly in the connection head, yield-ing the following benefits:• simplified installation and commissioning procedure• cost reduction due to minimized cabling expenditure• interference immunity for 4...20 mA signal transmission, even over long distances• error signalling in the event of sensor break, sensor short• circuit and polarity reversal • long-time stability, since no potentiometers are used• high immunity to environmental influences and vibration due to full encapsulation These temperature sensors for building automation, machineconstruction and environmental engineering use platinum resis-tance sensor elements. Most sensor types are available with orwithout an integrated transmitter. The transmitter is connected toa supply unit through a 2-wire cable and provides a 4...20 mAoutput signal. The measuring range is set permanently in factory.A programmable or HART-compatible transmitter is also avail-able.Type overview Model Type Possible applicationsAmbient temperature sensorTSBA (BA R-700)Previous designation: BA R-R/WTROfficesMeeting roomsHomesAmbient temperature sensorTSBA (BA R-750)Previous designation: BA R-RF/WTRFCold storesStore roomsProduction roomsCellarsAmbient indoor and outdoortemperature sensorTSBA (BA R-500)TSBA (BA R-500-i) (EEx i Zone 1)Cold storesOutdoor temperature measurementStore roomsProduction roomsCellarsResistance thermometer TSBA (SensyTemp BA R) 10/10-3.61 ENfor building automation, machine construction and environmental engineeringModel Type Possible applicationsAir duct temperature sensorTSBA (BA R-300)Air ducts3Previous designation: BA R-L/WTLAverage temperature sensorTSBA (BA R-900)Previous designation: BA R-Lm/WTLmAir registersAir ductsAir shaftsEnvironmental protectionPipeline temperature sensorTSBA (BA R-150)Previous design.: BA R-Ro/1 / WTRo/1Water pipesHeating pipesSewage pipesMechanical engineeringPipeline and air duct temperature sensorwith exchangeable measuring insetTSBA (BA R-200)Previous design.: BA R-Ro/2 / WTRo/2Air ducts, water pipes,heating pipes, sewage pipes,mechanical engineering,environmental engineeringPipeline and air duct temperature sensorTSBA (BA R-250)Air ducts, water pipes,heating pipes, sewage pipes,mechanical engineering,environmental engineeringPipeline and air duct temperature sensorwith quick-release connectorSensyTemp QuickAir ducts, water pipes,heating pipes, sewage pipes,mechanical engineering,environmental engineeringResistance thermometer TSBA (SensyTemp BA R) 10/10-3.61 ENfor building automation, machine construction and environmental engineeringAmbient temperature sensor TSBA (BA R-700)Resistance thermometer for measuring the air temperature in dry indoor roomsAmbient temperature sensor TSBA (BA R-750)Quick-response resistance thermometer for measuring the air temperature in dry and humid indoor rooms 4Typical applications: Homes, offices, function roomTechnical dataSensor1 x Pt 100Standard, toleranceEN 60751 (IEC 60751), Class BCircuit type4-wireMeasuring range-20...+80 °CHousingMaterialPlasticColorUpper part: cream (RAL 9013) with air ductsBottom part: black, ready for wall or flush mountingDimensions70 mm x 70 mm x 30 mmDegree of protectionIP 20Dimensions, wiring diagrams See page 12 for ordering details.Typical applications: cold stores, store rooms, production rooms, cellars, air shaftsTechnical dataSensor1 x Pt 100 or 2 x Pt 100Standard, toleranceEN 60751 (IEC 60751), class BCircuit type2-wireMeasuring range-30...+70 °CHousingMaterialPolycarbonateColorLight grey (RAL 7035)Dimensions50 mm x 52 mm x 80 mmDegree of protectionIP 65Cable entryPG 9Dimensions See page 12 for ordering details.View without housing lidTerminal blockResistance thermometer TSBA (SensyTemp BA R) 10/10-3.61 ENfor building automation, machine construction and environmental engineeringAmbient indoor and outdoor temperature sensor TSBA (BA R-500)Resistance thermometer for measuring the air tempera-ture in dry and humid indoor rooms and outsideTransmitterType TR04 for TSBA (BA R-500)Type TR04-Ex for TSBA (BA R-500-i)5Type TSBA (BA R-500) is also available as type TSBA(BA R-500-i). This model is intrinsically safe EEx i in accordancewith DIN EN 50 014, 50 020-5.4 and DIN EN 60 079-1 withmanufacturer’s declaration for use in Zone 1 and Zone 2.Typical applications: outdoor temperature measurement, cold rooms, store rooms, production rooms, cellarsTechnical dataSensor1 x Pt 100Standard, toleranceEN 60751 (IEC 60751), Class BCircuit type3-wireMeasuring range without integrated transmitter-40...+80 °CMeasuring range of the integrated transmitter-30...+60 °CHousingMaterialPlastic, ABSColorLight greyDimensions80 mm x 82 mm x 55 mmDegree of protectionIP 66Cable entryM20 x 1.5Dimensions, wiring diagramsSee page 12 for ordering details.without transmitter with integrated transmitterResistance thermometer TSBA (SensyTemp BA R) 10/10-3.61 ENfor building automation, machine construction and environmental engineeringAir duct temperature sensor TSBA (BA R-300)Resistance thermometer for temperaturemeasurement in air ductsInsertion length200 mm or 330 mm6Typical applications: air ducts, air shaftsTechnical dataSensor1 x Pt 100Standard, toleranceEN 60751 (IEC 60751), Class BCircuit type2-wireMeasuring range without integrated transmitter-50...+130 °CTransmitterType TR04Measuring range of the integrated transmitter-30...+60 °CMountingSheet metal flange, chromated, diameter 90 mmMeasuring inset– exchangeable– diameter 6 mm, base not closed,tip with 2 drilled holes– stainless steel sheath– inset length = insertion length + 38 mmConnection headWithout transmitter: Type BWith transmitter: Type BHCable entryM20 x 1.5Degree of protectionIP 53Response times (medium air, v = 1 m/s)t0.5 = 6 st0.9 = 20 sInsertion positionDrilled hole in direction of flowDimensions, wiring diagramsSee page 12 for ordering details.262 11Ø 52Ø 74Ø 90Ø 6Connection headDesign BInsertion length1 x Pt100 2-wireResistance thermometer TSBA (SensyTemp BA R) 10/10-3.61 ENfor building automation, machine construction and environmental engineeringAverage temperature sensor TSBA (BA R-900)The average temperature sensor has a measuring winding over its entire length for measuring the average Measuring range of integrated transmitter-20...+40 °C or -30...+60 °C7temperature in large rooms or ducts. Typical applications: Air registers, air ducts, air shafts, environmental protection equipmentTechnical dataMeasuring winding1 x Pt 100Standard, toleranceEN 60751 (IEC 60751), Class BCircuit type2-wireMeasuring range without integrated transmitter-40...+150 °CTransmitterType TR04ThermowellDiameter: 4 mmMaterial: copperMountingChromated sheet metal flange, diameter 90 mmAccessories: 5 mounting clamps, included in scope of deliveryActive length6000 mm or 10000 mmConnection headWithout transmitter: Type BWith transmitter: Type BHCable entryM20 x 1.5Degree of protectionIP 53Dimensions, wiring diagramsSee page 12 for ordering details.Laying diagramØ 4Ø 5.2Ø 74Ø 90Cu100282Connection headDesign BMounting clampactive length1 x Pt100 2-wireResistance thermometer TSBA (SensyTemp BA R) 10/10-3.61 ENfor building automation, machine construction and environmental engineeringPipeline temperature sensor TSBA (BA R-150)Resistance thermometer for temperature measurement in pipelines Standard, toleranceEN 60751 (IEC 60751), Class B8Due to its excellent response time and its immunity to shock andvibration, the TSBA (BA R-150) model is best suited for temper-ature measurement in mechanical engineering.Standardized connectors to DIN 43650 are used for making theelectrical connection. The contact pins of the connector plugsare gold-plated to avoid transition resistance resulting fromcorrosion. Due to this special feature the TSBA (BA R-150) modelis also suitable for use in harsh industrial environments.The device connector socket complies with flame class V0 toUL94. A profile packing is used to seal the transition between thefixed and the removable connector part. Contrary to the mostcommonly used flat packing the profile packing remains on thedevice socket even when the device is disconnected and, thus,cannot be lost.Typical applications:Water pipes, heating pipes, sewage pipes, temperature measurement of cooling water, oil, and engine intake air. Technical dataMeasuring winding1 x Pt 100Circuit type3-wireMeasuring range-50...+250 °CThermowellDiameter 6 mm; material 1.4571MountingScrewed plug, G½“ thread to DIN 3852Type A, material 1.4571Insertion length60 mm or 100 mmElectrical connectionConnector socket to DIN 43 650, type A,max. permissible temperature 125 °CCable entryPG11Degree of protectionIP 63Response times(Medium water, v = 0.3 m/s)t0.5 = 3.7 s; t0.9 = 8.8 sDimensions, wiring diagramsSee page 12 for ordering details.~ 50SW 30~ 6515 Ø 26G 1/2A1.47511.4751Ø 61 x Pt100 3-wireInsertion lenght (U)Resistance thermometer TSBA (SensyTemp BA R) 10/10-3.61 ENfor building automation, machine construction and environmental engineeringPipeline and air duct temperature sensor TSBA (BA R-200)Resistance thermometer for temperature measurement in pipelines and air ducts, with exchangeable measuring Measuring range of integrated transmitter-30...+60 °C or -20...+100 °C9insetTypical applications: Water pipes, heating pipes, sewage pipes, air ducts,mechanical and environmental engineeringTechnical dataMeasuring winding1 x Pt 100Standard, toleranceEN 60751 (IEC 60751), Class BCircuit type3-wireMeasuring range without integrated transmitter-50...+400 °CTransmitterType TR04ThermowellDiameter 8 mm; material 1.4571Mountingsee “Mounting accessories”Nominal length150 mm or 250 mmMeasuring inset– exchangeable– diameter 3 mm– inset length = nominal length + 25 mmConnection headWithout transmitter: Type BWith transmitter: Type BHCable entrySkintop PG13.5Degree of protectionIP 66Dimensions, wiring diagramsSee page 12 for ordering details.1 x Pt100 3-wireredredResistance thermometer TSBA (SensyTemp BA R) 10/10-3.61 ENfor building automation, machine construction and environmental engineeringPipeline and air duct temperature sensor TSBA (BA R-250)Resistance thermometer for temperature measurement in pipelines and air ducts TransmitterType TR0410Due to its special design providing for good vibration immunity,the TSBA (BA R-250) model is perfectly suited for mechanicalengineering applicationsTypical applications: Water pipes, heating pipes, sewage pipes, air ducts,mechanical and environmental engineeringTechnical dataMeasuring winding1 x Pt 100Standard, toleranceEN 60751 (IEC 60751), Class BCircuit type3-wireMeasuring range without integrated transmitter-50...+250 °CMeasuring ranges of the integrated transmitter-30...+60 °C or -20...+100 °CThermowellDiameter 8 mm; material 1.4571Mountingsee “Mounting accessories”Nominal length100 mm, 150 mm, 250 mm or 400 mmConnection headType B (also with integrated transmitter)Cable entrySkintop PG 13.5Degree of protectionIP 66Dimensions, wiring diagramsSee page 12 for ordering details.1 x Pt100 3-wireredredResistance thermometer TSBA (SensyTemp BA R) 10/10-3.61 ENfor building automation, machine construction and environmental engineeringPipeline and air duct temperature sensor SensyTemp QuickResistance thermometer for temperature measurement in Influence of ambient temperatureLower range value, measuring span= 0.15 %/10 K or 0.15 K/10 K, the greater value appliesElectromagnetic compatibility11pipelines and air ducts, with quick-release fasteners The quick release fasteners save you 6 of the usually necessary10 work steps and, thus, more than 50 % of the installation time.For technical details and the ordering information please refer todata sheet 10/10-3.75 EN – SensyTemp Quick.Technical data of integrated transmittersTR04OutputOutput current4...20 mA temperature-linearCurrent limiting> 3.6 mA and = 30 mASupply voltage Vs10.5...30 V DCMax. loadin the measuring range:RRmax (?) =with reliable sensor break signalling(Imax < 26 mA, Vs = 30 V)Rise time (t90)< 0.5 sAccuracy of drift values (percentage values related to the span)Compensation uncertaintyIf lower range value = 0 °C= 0.15 % or 0.15 K, the greater value appliesIf lower range value < > 0 °C= 0.2 % or 0.2 K, the greater value appliesLinearity deviation= 0,1%In accordance with NAMUR EMC (as of 2/88)Gen. interference immunity for: Test circ. Standard DeviationTransient overvoltage 2 Kv IEC 801-4 < 0.5 %Static discharge 8 KV IEC 801-2 < 0.5 %Electromagnetic fields 10 V/m IEC 801-3 < 0.5 %Influence of supply voltage0.05 %/10 K (related to 20 V DC)Influence of vibrationNo influence (tested up to 35 g)Error signallingSensor break > 22 mASensor line break > 22 mASensor short circuit < 3.0 mASupply voltage, reversed polarity: 0 mAGeneral data and safety data Environmental capabilitiesStorage temperature-40...+20...+100 °CAmbient temperature-40...+20...+85 °CHumidity0...100 % relative humidity (with insulated sensor connection)Power terminalsM 3.5Weight50 g (module)Dimensional drawings Vs(V) - 10.5 V0.02 AConnection head, Type B Type BHZ-17916Ø 7050~ 7550Ø 49Ø 6959~112Lid with installedtransmitterResistance thermometer TSBA (SensyTemp BA R) 10/10-3.61 ENfor building automation, machine construction and environmental engineeringOrdering InformationCatalog No. EUR Deliv. timeTSBA (BA R-700) 1 x Pt 100, 4-wire circuit, 7962537 65,90 ex stock12TSBA (BA R-750) 1 x Pt 100, 2-wire circuit 220103 105,00 ex stock2 x Pt 100, 2-wire circuit 220104 111,00 ex stockTSBA (BA R-500) 1 x Pt 100, 3-wire circuit 239925 111,00 ex stock1 x Pt 100, 3-wire circuit, with transmitter TR04 -30...+60 °C 239926 201,00 2 wks.TSBA (BA R-500-i) 1 x Pt 100, 3-wire circuit 240856 119,00 ex stock1 x Pt 100, 3-wire circuit, with transmitter TR04-Ex -30...+60 °C 240857 225,00 2 wks.TSBA (BA R-300) 1 x Pt 100, 2-wire circuit Insertion length 200 mm 7962541 231,00 ex stockInsertion length 330 mm 7962542 237,00 ex stock1 x Pt 100, 2-wire circuit, with transmitter TR04 -30...+60 °CInsertion length 200 mm 7962544 350,00 2 wks.Insertion length 330 mm 7962545 356,00 2 wks.TSBA (BA R-900) 1 x Pt 100, 2-wire circuit Active length 6000 mm 7962547 806,00 ex stockActive length 10000 mm 7962548 866,00 ex stock1 x Pt 100, 2-wire circuit with transmitter TR04 -30...+60 °CActive length 6000 mm 7957661 926,00 2 wks.Active length 10000 mm 7957664 986,00 2 wks.1 x Pt 100, 2-wire circuit with transmitter TR04 -20...+40 °CActive length 6000 mm 7962549 926,00 2 wks.Active length 10000 mm 7962550 986,00 2 wks.TSBA (BA R-150) 1 x Pt 100, 3-wire circuit Insertion length 60 mm 238590 119,00 ex stockInsertion length 100 mm 238591 123,00 ex stockTSBA (BA R-200) 1 x Pt 100, 3-wire circuit, measuring inset exchangeableNominal length 150 mm 240427 117,00 ex stockNominal length 250 mm 240428 123,00 ex stock1 x Pt 100, 3-wire circuit with transmitter TR04 -30...+ 60 °CNominal length 150 mm 240429 237,00 2 wks.Nominal length 250 mm 240430 242,00 2 wks.1 x Pt 100, 3-wire circuit with transmitter TR04 -20...+100 °CNominal length 150 mm 240431 237,00 2 wks.Nominal length 250 mm 240432 242,00 2 wks.TSBA (BA R-250) 1 x Pt 100, 3-wire circuit Nominal length 100 mm 240840 87,60 ex stockNominal length 150 mm 240841 92,70 ex stockNominal length 250 mm 240842 98,90 ex stockNominal length 400 mm 240843 111,00 ex stock1 x Pt 100, 3-wire circuit with transmitter TR04 -30...+ 60 °CNominal length 100 mm 240844 177,00 2 wks.Nominal length 150 mm 240845 182,00 2 wks.Nominal length 250 mm 240846 188,00 2 wks.Nominal length 400 mm 240847 201,00 2 wks.1 x Pt 100, 3-wire circuit with transmitter TR04 -20...+100 °CNominal length 100 mm 240848 177,00 2 wks.Nominal length 150 mm 240849 182,00 2 wks.Nominal length 250 mm 240850 188,00 2 wks.Nominal length 400 mm 240851 201,00 2 wks.Continued on next pageOther versions on requestResistance thermometer TSBA (SensyTemp BA R) 10/10-3.61 ENfor building automation, machine construction and environmental engineeringOrdering Information (continued) Catalog No. EUR Deliv. timeAccessoriesAdjustable compression fitting for TSBA (BA R-200), TSBA (BA R-250)13Mounting accessoriesthread size G1/2 A material galv. Steel 230646 16,50 ex stockthread size G1/2 A material stainless steel 228302 31,90 ex stockthread size 1/2" NPT material stainless steel 238451 31,90 ex stockthread size M18x1.5 material galv. Steel 222024 16,50 ex stockAdjustable sheet metal flange (chromised) for TSBA (BA R-200), TSBA (BA R-250) 233889 16,50 ex stock1 package mounting clamps for TSBA (BA R-900) (5 pcs. per package) 242804 30,00 ex stockOther versions on requestfor TSBA (BA R-200, BA R-250)Adjustable compression fittingCylindrical thread, G 1/2 AMaterial steel, galvanized / steel clamp ringMaterial stainless steelfor TSBA (BA R-900)Adjustable sheet metal flangeDiameter 90 mm, chromatedAdjustable compression fittingConical thread, 1/2’’ NPTMaterial stainless steelAdjustable compression fittingCylindrical thread, M18 x 1.5Material steel, galvanized / steel clamp ringMounting clamp, copper,Min. quantity to be ordered: 10 pieces10/10-3.61 ENRev. CThe IndustrialIT wordmark and all mentioned product names in the form XXXXXXIT are registered or pending trademarks of ABB.ABB has Sales & Customer Supportexpertise in over 100 countries worldwide.www.abb.comThe Company’s policy is one of continuous productimprovement and the right is reserved to modify theinformation contained herein without notice.Printed in the Fed. Rep. of Germany (09.08)© ABB 2008ABB Ltd.Salterbeck Trading EstateWorkington, CumbriaCA14 5DSUKTel: +44 (0)1946 830 611Fax: +44 (0)1946 832 661ABB Inc.125 E. County Line RoadWarminster, PA 18974USATel: +1 215 674 6000Fax: +1 215 674 7183ABB Automation Products GmbHBorsigstr. 263755 AlzenauGermanyTel: +49 551 905-534Fax: +49 551 905-555