Introducing the new CC-3000 computer interface full data logger
The CC-3000 provides the user with the ability to observe, archive and export the weather data provided by the MKlll sensor assembly. The included software package provides multiple viewing screens of real-time weather, daily, monthly and yearly summaries, alarming capability and internet posting. The CC-3000 will communicate with any host system that supports the FTDI USB serial bridge.
The CC-3000 is supported by several third party software packages such as `Weatherview 32,` `VirtualWeather,` and `WeatherSnoop.` The CC-3000 can also be used with any generic terminal emulator software such as `HyperTerminal.`
The CC-3000 Computer Interface offers:
- 3 Radio Options: Integrated 2.4GHz Radio or External 418MHz, 433MHz Radio
- Fast USB or RS-232, RS-485/422
- 2 MB of Flash Memory
- NiMH Battery Backup
- Inside Temperature Sensor
- 25 MHz High Speed Processor
- Software Updates through your Computer
- Now Supports both English and Metric Units
- New Command Protocol
- Daylight Savings Support
- Expansion Port
Integrated Radio:
Unlike the previous interface, a LR 2.4GHz radio receive can be build right into the unit. This means less wires and a cleaner desk. A power cable and USB cable are all that are required.The new switching power supply is smaller and more efficient. The 418MHz and 433MHz receivers are also available for models with the external radio option.
Fast USB or RS-232:
The CC-3000 is normally shipped with a USB interface. An RS-232, RS-485/422 version is available for applications that require serial connections like cellular and satellite modems. The baud rate has been boosted from 9600 to 115,200. Even with extra memory download times are dramatically reduced. USB drivers are provided for Windows, Mac and Linux.
Flash Memory:
Memory has been increased from 32K to 2MB.The 32K was RAM based which meant if you lost power you lost your data. This is not the case with flash, your data is non-volatile and will not be destroyed when power is lost.The data stored in memory is compressed so the 2MB will allow for long intervals between downloads.
NiMH Battery Backup:
The CC-3000 now uses NiMH battery backup.These batteries are much easier to get than NiCAD and have substantially more capacity. Fully charged batteries will keep the CC-3000 running for more than 24 hours.The new case includes a battery compart- ment which makes installing the four batteries very easy.
Inside Temperature:
A thermistor-based temperature sensor is built into the interface. This provides inside temperature which can be very useful for freeze alarms in holiday homes.
High Speed Processor:
The performance of the primary processor has been increased while also reducing power consumption.The increased perfor- mance allows for faster communications and more features.
Software Updates:
The new CPU can be reprogrammed via the USB or RS-232 interface.This means that updates can be quickly and easily applied by the user.This also allows for multiple software programs that use the same hardware. Rainwise can now offer custom soft- ware designed for specific tasks. Contact us if you have a specific requirement.
English and Metric Units:
The original interface was only available in English units. Metric was achieved by having a PC application convert the data.The CC- 3000 has user selectable units.
New Command Protocol:
The new command protocol was designed to offer greater flex- ibility, be more user friendly and easier for software developers to use.The full protocol and command list are supplied and available in the CC-3000 instruction manual.
Daylight Savings:
Daylight savings is now supported.The dates, times and shift are user selectable.This allows the CC-3000 to be used in any country around the world.
Expansion Port:
In preparation for future functionality the CC-3000 is equipped with an expansion port.This connector will allow for future digital and analog sensors.