- Home
- Equipment
Refine by
Aemc Xprt Equipment & Supplies
9 equipment items found
Manufactured by:AEMC Instruments based inDover, NEW HAMPSHIRE (USA)
The True RMS Clamp-On Meter Model 203 is safety rated at 600V CAT IV. It measures AC+DC volts and amps, frequency, continuity, resistance, and temperature (with the supplied K thermocouple probe). The Model 203 can also perform diode checks. Its Adapter mode displays external sensor inputs. The Delta relative function compares new measurements to a reference value, and the MIN/MAX function tracks ...
Manufactured by:AEMC Instruments based inDover, NEW HAMPSHIRE (USA)
The Model AX502 offers dual 30V outputs. It provides the ability to display both voltage and current for each output. The Model AX502 offers a unique master/slave tracking arrangement whereby the ratio between the master and slave can be setup on the fly as needed during the test. Adjusting the master voltage causes the slave to track. Adjusting the slave voltage causes the ratio from master to ...
Manufactured by:AEMC Instruments based inDover, NEW HAMPSHIRE (USA)
The Capacitance Decade Box Model BC05 is built into a metal bench top box. It is used for testing and calibration of test equipment. The main function of the Model BC05 is to create a capacitance with a specific value by using a combination of the rotary decade switches. The Model BC05 has five decade ranges. The Model BC05 is equipped with Ø 4mm safety terminals for connections. It is ...
Manufactured by:AEMC Instruments based inDover, NEW HAMPSHIRE (USA)
The Model 5231 is a rugged, economical TRMS digital multimeter with a non-electrical contact testing (NCV) function for detecting live electrical circuits. This multimeter is designed for safety: IEC61010 600V CAT IV. The Multimeter Model 5231 provides a Volt, Ohm, Continuity, Diode function, as well as an AC voltmeter function with low input impedance that is capable of finding ghost voltages by ...
Manufactured by:AEMC Instruments based inDover, NEW HAMPSHIRE (USA)
The Simple Logger II Model CL601 is a one channel recording device with an alkaline battery pack. Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of ±2Hz around the nominal line frequency 50 or 60Hz. Harmonic measurements are calculated from these 64 samples. It records TRMS at a rate of up to eight times per ...
Manufactured by:AEMC Instruments based inDover, NEW HAMPSHIRE (USA)
The Digital Ground Resistance Tester Model 4620 performs earth ground resistance and soil resistivity tests. This direct reading tester measures from 0 to 2000Ω, and is auto-ranging, so it automatically seeks outs the optimum measurement range. The Model 4620 is rugged, easy-to-use and is ideal for maintenance crews performing numerous tests. It exceeds mechanical and safety ...
Manufactured by:AEMC Instruments based inDover, NEW HAMPSHIRE (USA)
The Lightmeter Model 1110 is a portable, easy-to-use instrument which features optical sensors that are designed to match the response of the human eye, making them ideal instruments for workspace analysis and planning. The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using supplied DataView® software. The ...
Manufactured by:AEMC Instruments based inDover, NEW HAMPSHIRE (USA)
The AEMC Cable Locator Model 6681 detects buried (in ground or in walls) telecommunications cables, electric power and other cables, and metal pipes, during modification or maintenance work on installations of category III (or lower), at voltages of 300V (or less) with respect to ground. The system can locate open circuits, shorts, track cables and locate fuses or circuit breakers. The instrument ...
Manufactured by:AEMC Instruments based inDover, NEW HAMPSHIRE (USA)
An essential tool for electricians to ensure that voltage is not present before working on any electrical equipment or installation connected to the electrical system. Compliant with IEC 61243-3 Edition 2, the C.A 771 VAT can be used to work on any 1000V CAT IV installation. To meet the requirements of the standards in certain countries, these testers are available in two versions: equipped with ...