- Home
- Equipment
Refine by
Anis Xprt Equipment & Supplies
24 equipment items found
Manufactured by:Anis Trend d.o.o. based inLoški potok, SLOVENIA
Friction conveyors are heavy-duty welded construction and can be manufactured up to 2 metres wide. High quality bearings and drive drums are incorporated for long-life operation. Sensors can be fitted to monitor belt slip. All friction conveyors can be fitted with vertical speed ...
Manufactured by:Anis Trend d.o.o. based inLoški potok, SLOVENIA
ANIS can design and supply heavy-duty feed hoppers to suit all types of material throughput. Each hopper is designed specifically to suit the application. Traffic light systems integrating load sensor conveyors can be incorporated to help operators with ...
Manufactured by:Anis Trend d.o.o. based inLoški potok, SLOVENIA
Hydraulically switchable turbulators - rufflers, mounted into the baler filling shaft, are used by ANIS in the waste paper processing, to loosen up and spread equally heavy materials such as prepressed wastepaper or books. An additional, swivelling ruffler with a powerful, robust external drive loosens up compact heavy types of materials and makes it possible to produce high-quality bales. It ...
Manufactured by:Phocos Americas, Inc. based inTucson, ARIZONA (USA)
The Any-Bridge™ AB-PLC-CAN Monitoring & Control Gateway allows access to your Phocos power system via the PhocosLink Cloud portal. Attaching to an internet-connected router through the Wi-Fi or Ethernet LAN port on the Any-Bridge gives you access to the PhocosLink Cloud portal enabling rich visual access to your system from anywhere in the world. Remote monitoring via the PhocosLink ...
Manufactured by:Anis Trend d.o.o. based inLoški potok, SLOVENIA
A user friendly, very economically priced and safe small-volume channel shear baler series, or optionally clearance baler with a choice of horizontal or vertical wire tying which offers solutions to all small load operations requiring a fully automatic baler. This baseline baler is easy to control, maintenance free and has no unnecessary options. This baler series has a short channel which means ...
Manufactured by:Anis Trend d.o.o. based inLoški potok, SLOVENIA
Lightweight, flat, sliding rubber conveyors (the rubber is stretched during movement and by a tensioning cylinder), supported either by small cylinders or sheet metal. Sliding belt conveyors are of heavy-duty welded construction and can be manufactured up to 1.9 metres wide. High-quality bearings and drive drums are incorporated for long operating life. Friction conveyors can be fitted with ...
Manufactured by:Anis Trend d.o.o. based inLoški potok, SLOVENIA
For Multi-purpose use: The pre-press baler line contains all the developments from ANIS »PREMIUM line« shear baler with the addition of pre-compression flaps and provides extremely heavy, homogenous and compact bales. It is equipped with the shear blades and pre-pressing with two options: Single Prepress Flap – at the rear of the feeding opening, or Double lateral Prepress Flaps ...
Manufactured by:Hardy Process Solutions based inSan Diego, CALIFORNIA (USA)
Hardy"s ANY-WEIGH Bench Scales can be used for general check weighing or filling applications, placed under a feeder for loss-in-weight rate control, or for general Quality Assurance (QA) laboratory work. ANY-WEIGH Bench Scales are resistant to moisture with a stainless steel top, powder coated steel base, and conformal-coated internal circuitry. However, they are not intended for immersion in ...
Manufactured by:Hardy Process Solutions based inSan Diego, CALIFORNIA (USA)
The HI AFS Series of floor scales can be used for general process (mount a machine or vessel to it) pallet, drum, or shipping weighing applications. They feature a rugged structural rib design with a ¼ inch thick steel smooth or diamond plate deck that can withstand over loads of up to 150% of their capacity. Their low height of three inches and 100% end loading allow the easy access and ...
Manufactured by:Anis Trend d.o.o. based inLoški potok, SLOVENIA
PET perforator can be upgraded individual or in the channel baler feeding chute It provides: - Heavier bale weight that will lower transport costs when loaded onto a truck or into a container - prevent wire ...
Manufactured by:Anis Trend d.o.o. based inLoški potok, SLOVENIA
The feeding hopper can be lengthened or shortened depending on the intended use or the size of the pieces of material. Each above-mentioned baler includes a mounted cylinder to either increase or decrease the compression force. Based on that fact, we can offer you three heavy-duty methods of manufacture. Engine power or the number of mounted engines is dependent on the required ...
Manufactured by:Anis Trend d.o.o. based inLoški potok, SLOVENIA
Chain belt conveyors can be designed to widths of up to 2 metres and drive chain strengths to suit the application. Chain belt conveyors can be fitted with rubber or steel belts, all chain belt conveyors are heavy-duty welded construction, complete with high quality bearings and gearboxes. All chain belt conveyors can be fitted with variable speed controls. Specifications: • Heavy-duty chain ...
Manufactured by:Anis Trend d.o.o. based inLoški potok, SLOVENIA
ANIS can offer simple and cost effective solutions to the separation of all types of material from plastic, cardboard, paper, aluminum, steel, e-Waste and glass. All systems are designed around customer's specific requirements, incorporating as much or as little automation as required, with the system being designed around available space. The systems comply with current safety requirements for ...
Manufactured by:Anis Trend d.o.o. based inLoški potok, SLOVENIA
ANIS can offer simple and cost effective solutions to the separation of all types of material from comingled material, MSW to paper & board separation. All systems are designed around customer's specific requirements, incorporating as much or as little automation as required, with the system being designed around available space. Systems can be designed to incorporate infeed bunkers, bag ...
Manufactured by:Imeka based inSherbrooke, QUEBEC (CANADA)
Better Results from Higher Resolution; Any research involving white matter will benefit from our ...
Manufactured by:Merrill Manufacturing Company based inStorm Lake, IOWA (USA)
A water well industry icon since 1949. Built on strong Midwestern roots, the Any Flow® series frost-proof yard hydrant delivers uninterrupted year-round water service, regardless of weather conditions. Its unique plunger assembly increases plunger life expectancy by 200%, outperforming industry counterparts. The use of a pivot connector and nut enables easy adjustments as opposed to fighting ...
Manufactured by:Phocos Americas, Inc. based inTucson, ARIZONA (USA)
The Phocos Any-Grid™ PSW-H Inverter Charger Series (Pure Sine Wave Hybrid) represents Phocos’ most versatile line of inverters/chargers. Flexibility and reliability are key characteristics of this product line, with a strong potential for cost saving opportunities in real world conditions. The Any-Grid PSW-H converts DC (Direct Current) energy into AC (Alternating Current), with ...
Manufactured by:Phocos Americas, Inc. based inTucson, ARIZONA (USA)
The Phocos Any-Grid™ PSW-B Series (Pure Sine Wave Battery Inverter Charger) is part of Phocos’ versatile line of Any-Grid inverters/chargers. Flexibility and reliability are key characteristics of this product line, with a strong potential for cost saving opportunities in real world conditions. The Any-Grid PSW-B converts DC (Direct Current) into AC (Alternating Current), with ...
Manufactured by:Phocos Americas, Inc. based inTucson, ARIZONA (USA)
The Phocos Any-Cell Energy Storage System LFP Series (ESS-L) is a compact, modular LiFePO4 solution offering a safe, environmentally friendly, long cycle-life storage system. Enhanced by an integrated advanced battery management system (BMS), the Any-Cell ESS-L provides seamless integration with other Phocos products. Lithium Iron Phosphate (LiFePO4) technology is environmentally friendly ...
Manufactured by:Anis Trend d.o.o. based inLoški potok, SLOVENIA
For Multi-purpose use: The pre-press baler line contains all the developments from ANIS »PREMIUM line« shear baler with the addition of pre-compression flaps and provides extremely heavy, homogenous and compact bales. It is equipped with the shear blades and pre-pressing with two options: Single Prepress Flap – at the rear of the feeding opening, or Double lateral Prepress Flaps ...