- Home
- Equipment
Refine by
Accsense Xprt Equipment & Supplies
23 equipment items found
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The EC-3V AC Voltage Data Logger allows engineers to quickly and cost-effectively monitor and resolve single & 3-phase voltage problems. It has an integral Phase Sequence/Rotation Checker. The voltage levels are stored with dates and times. With the back-up battery, the Electrocorder data logger can continue to record for a year. Kit includes data logger, voltage input leads, USB lead, ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The EC-1V data logger is widely used to monitor voltage variations on site, allowing voltage problems to be highlighted quickly for further investigation using traditional recorders. When recording the Electrocorder will store the average voltage over the period chosen (1 sec to 60 min), it will also record the highest (max) & lowest (min) cycle values during that period. The Electrocorder ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The DC-3V-60 data logger is specifically designed to accurately monitor one, two or three DC voltage channels, 1V to 60Vdc. This allows you to monitor charger performance and PV (photovoltaic) cell output, as well as many other applications like DC motors. There are many models of Electrocorder, to suit many logging situations and user’s requirements. When recording, the Electrocorder ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
This single phase data logger is specifically designed to monitor one voltage channel and one current. It allows you to monitor the main voltage supply and the load current, enabling staff to determine whether a voltage problem is load related or not. The Electrocorder range is designed to allow electrical distribution companies to cost effectively monitor single and three phase supplies. ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The PV-3 data logger is used by installers, householders, renewable energy companies to check PV (photo voltaic) installations. It can record solar irradiation up to 1,500W/m2 (watts per square meter), DC Voltage and DC Current produced by the panel, allowing you to assess the performance of a solar energy ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The CT-3A is specifically designed to accurately monitor one, two or three current channels allowing you to monitor the loading and/or balancing problems and energy consumption of an ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The A2-05 Ethernet Temperature monitor is designed for temperature measurement and alarm in medical refrigerators, freezers, cryogenic storage and incubators. The data logger has connections for external RTD and Thermocouple sensors. In the event of a loss of the network connection, the datalogger will store up to 256 data points, or until the connection is ...
Manufactured by:Accsense Inc. based inChesterland, OHIO (USA)
The EC-1V data logger is widely used to monitor voltage variations on site, allowing voltage problems to be highlighted quickly for further investigation using traditional recorders. When recording the Electrocorder will store the average voltage over the period chosen (1 sec to 60 min), it will also record the highest (max) & lowest (min) cycle values during that period. The Electrocorder ...
Manufactured by:Accsense Inc. based inChesterland, OHIO (USA)
The EC-3V has an integral Phase Sequence/Rotation Checker. The voltage levels are stored with dates and times. With the back-up battery, the Electrocorder data logger can continue to record for a year. The Electrocorder range use a constant sampling technique, unlike the single reading of competitors. When the loggers start to record, they sample every channel 16 times per cycle, a cycle is 16ms ...
Manufactured by:Accsense Inc. based inChesterland, OHIO (USA)
This data logger is specifically designed to monitor one, two or three current channels, allowing you to monitor the loading and energy consumption of the installation. The stored data is uploaded to a PC via the supplied USB cable. The product is supplied with three Rogowski transducers. Four models are available. The EC-3A-FK has a range of 5 to 400A, the EC-3A-1K has a range of 10 – 1kA, ...
Manufactured by:Accsense Inc. based inChesterland, OHIO (USA)
The A1-01a General Purpose Sensor Pod is designed for general environmental measurements. It provides several different internal sensors, as well as a screw terminal connector for connecting to a wide range of external analog sensors. The pod also includes a +5Vdc output to power external sensors. In the event no gateway can be reached, individual pods will store up to 255 data points, until a ...
Manufactured by:Accsense Inc. based inChesterland, OHIO (USA)
The A1-08 Multi-Thermistor Pod is specifically designed to hook up to multiple thermistor inputs (6 total). This allows an increase in the number of sensors per pod and reduces the cost per measurement. This model also features two digital inputs and is designed to be connected to a wide range of digital ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The EC-7VAR Power Energy Data Logger is specifically designed to monitor one, two or three current channels, as well as one, two or three voltage channels. It allows you to monitor the loading and energy consumption of the installation. Power Factor recorded is the phase angle between L1 and A1. Amp ranges are selectable from 400 or 3000 AAC. Why is the Electrocorder better than other similarly ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
This data logger is specifically designed to monitor one, two or three current channels, allowing you to monitor the loading and energy consumption of the installation. The stored data is uploaded to a PC via the supplied USB cable. The product is supplied with three Rogowski transducers. Four models are available. The EC-3A-FK has a range of 5 to 400A, the EC-3A-1K has a range of 10 ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The EC-7VAR Power Energy Data Logger is specifically designed to monitor one, two or three current channels, as well as one, two or three voltage channels. It allows you to monitor the loading and energy consumption of the installation. Power Factor recorded is the phase angle between L1 and A1. Amp ranges are selectable from 400 or 3000 ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The B1-06 Gateway is the connection between your data and the internet. The B1-06 Wireless Gateway sends all of your data to either our secure servers or as a local ASCII stream which you can incorporate into your own custom software. Data stored online can be downloaded as a CSV file and loaded into most database applications. Additionally, our servers can send out phone, text or email ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The Accsense Vaccine Storage Temperature Monitoring Kit is the ideal solution for the temperature monitoring and alarming needs of clinics, health departments, hospital pharmacies, and other healthcare facilities around the world. Our kit enables you to monitor temperature in a refrigerator or freezer and will also provide customized alarming and data storage. With inputs for 2 RTDs and a ...
Distributed by:CAS DataLoggers based inChesterland, OHIO (USA)
The A2-05-W WiFi Temperature monitor is designed for temperature measurement and alarm in medical refrigerators, freezers, cryogenic storage and incubators. The data logger has connections for external RTD and Thermocouple sensors. In the event of a loss of the network connection, the datalogger will store up to 256 data points, or until the connection is ...
Manufactured by:Accsense Inc. based inChesterland, OHIO (USA)
The DC-3V-60 data logger is specifically designed to accurately monitor one, two or three DC voltage channels, 1V to 60Vdc. This allows you to monitor charger performance and PV (photovoltaic) cell output, as well as many other applications like DC motors. There are many models of Electrocorder, to suit many logging situations and user’s requirements. When recording, the Electrocorder will ...
Manufactured by:Accsense Inc. based inChesterland, OHIO (USA)
This data logger is specifically designed to monitor one, two or three current channels, as well as one, two or three voltage channels. It allows you to monitor the loading and energy consumption of the installation. There are many models of Electrocorder, to suit many logging situations and user’s requirements. Power Factor recorded is the phase angle between L1 and ...