- Home
- Equipment
Refine by
Afton Xprt Equipment & Supplies
8 equipment items found
Manufactured by:Afton Pumps Inc. based inHouston, TEXAS (USA)
Afton vertical in-line centrifugal pumps are compact and simple to install. These pumps eliminate standard pump foundations, simplify thermal expansion calculations and reduce pipe strain from temperature ...
Manufactured by:Afton Pumps Inc. based inHouston, TEXAS (USA)
The New Maintenance Saving Bearing Bracket. The new Afton Bearing Bracket vertical in-line pumps are recommended for all in-plant petroleum and petrochemical process services with flow rates to 4,000 GPM and differential pressures to 750 ...
Manufactured by:Afton Pumps Inc. based inHouston, TEXAS (USA)
Afton Pumps, Inc. has developed a line of power recovery turbines to be used in conjunction with pumping systems in new or existing ...
Manufactured by:Afton Pumps Inc. based inHouston, TEXAS (USA)
The Model PRT has been developed in addition to the Model ATP, which was introduced in 1981. The purpose of the PRT is to achieve higher recovery efficiencies and to simplify the design. The Model PRT will achieve efficiencies of 85% and higher depending upon the operating conditions. The Afton Pump power recovery turbine is of high quality and dependability. The Model PRT can be obtained in ...
Manufactured by:Afton Pumps Inc. based inHouston, TEXAS (USA)
Efficient and compact, the HPV provides flow rates to 1,200 GPM, differential pressures to 1,800 PSI. Four sizes each with several impeller patterns efficiently cover the entire design ...
Manufactured by:Afton Pumps Inc. based inHouston, TEXAS (USA)
These versatile and flexible pumps are rugged, simple, and capable of moving a wide variety of liquids from open pits or closed sub-surface vessels. Applications to 50,000 GPM with heads to 2,000 feet can be handled. Afton has units to 1,250 horsepower in operation and parts are stocked for shipment of units up to 8,000 GPM. Afton has divided the Model GSV into three service classifications - ...
Manufactured by:Afton Pumps Inc. based inHouston, TEXAS (USA)
The MPV is furnished with an all steel rigid adjustable spacer coupling to transmit up and down thrust, with adequate spacer length for seal assembly ...
Manufactured by:Afton Pumps Inc. based inHouston, TEXAS (USA)
The MPV-B design maximizes seal life, eliminates the requirement for high thrust motors, uses standard flexible couplings, permits easy seal changes, and simplifies motor alignment. The Model MPV-B pump thrust bearings are oil lubricated, angular contact type with a standard B-10 life of 40,000 hours. Oil Mist and Purge Mist lubrications are also available. The bearing bracket and cover plate are ...