- Home
- Equipment
Refine by
Ankersmid Xprt Equipment & Supplies
29 equipment items found
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The APP portable gas sampling probe is especially designed for portable applications where easy handling, safe and reliable operation as well as easy maintenance are required. The low weight and innovative design guarantees a perfect operation in a wide range of conditions for short and medium term mobile measurements. The probe is heated up to 180°C in order to maintain the sample ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The heated sample lines are manufactured according to the clients specification and completely confectioned in the factory at a fixed length. The heating element used in this type of heated line is an autoregulated ribbon. The heated line is secured closely to the sample carrier tube, thus eliminating the occurrence of cold zones or spots in the heated line, and therefore also eliminating the ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
Our robust manifolds are availeble in all possible sizes connections and materials. 2 Vaive Manifold hange to Flange design for separate mounting, connecting system impulse lines and transmitters, having simple two valve configuration which allows for easy block, bleed and calibration of static pressure transmitter or gauge ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The stationary system is suitable for variable, discontinuous and continuous operation. The components built into the system can be used for standard applications. For special requirements please ask us for other ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
In the high temperature combustion processes, the nitrogen contained in the air reacts with the oxygen producing oxides of nitrogen in the forms of monoxide (NO) and dioxide (NO2). The item NOx shows the total amount of the two components. For provisions laid down by law and regulatory instructions in terms of environmental protection or for process needs, the monitoring of the NOx content in ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
Ankersmid Universal Filters are known as a reliable technique for the separation of particles from gas, ensuring a flow of clean gas to the analyzer. Filter housings in a variety of materials and standard dimensions are ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
Due to various acid dew points at various applications the probe is heated up to 180°C. A filter element of 150mm is integrated, suitable for most applications up to 1g dust/m3. A significant advantage is that this filter is replaceable without dismounting the probe and without using any tools. Due to its modular design and various options, the heated sample probe covers the widest range of ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The variety of construction design of the ambient air filters AAF 050 / 051 / AAF 052 / AAF 053 allows for a perfect adaptation to local ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The stationary system is suitable for variable, discontinuous and continuous operation. The components built into the system can be used for standard applications. For special requirements please ask us for other ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The electronic temperature controller is mounted in a wall-mounting housing. The temperature sensor input is developed for multiple sensor inputs (standard PT100). The desired operating temperature can be set by using the respective control keys. The actual value is indicated via 4-digit display and the controller > function via ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The two-step electronic temperature controller is mounted in a rail mounting housing. The temperature sensor input is developed for a two-wire PT100 sensor and is equipped with a protection against short circuit and sensor breach. The desired operating temperature can be set by using the respective control keys. Temperatures can be displayed in degrees Celsius or degrees Fahrenheit. The actual ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
Gas flows into the filter body by one of two inlets in the standard filter head. The gas flows out of holes in the lower part of the filter and then passes through the adsorption material to exit again at the head of the filter ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
ABYSS SynGas ASG infrared analyser can be used for continuous emissions monitoring or the online process measurement of up to 6 gases simultaneously. The ASG uses a combination of two proven technologies: single source Non-Dispersive Infrared (NDIR) method for CO, CO2, CH4, CnHm and electrochemical sensors (ECD) for H2 and O2. The instrument is housed in a robust and compact enclosure and offers ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The portable system is suitable for variable, discontinuous and continuous operation. The components built into the system can be used for standard applications. For special requirements please ask us for other solutions. The heated sample line is to be mounted at the gas measuring inlet terminal inside the portable case. ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
Due to its modular design and various options, the Ankersmid heated sample probe filters cover the widest range of applications. With a choice of different lengths of heated filter body, a filter element of 150mm length, suitable for most applications up to 1g dust/m3 can be integrated. 180mm filters with a larger filter surface are used for applications up to 4g dust/m3; with the blow- back ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
This electrically heated sample lines series AHL are designed for connecting to all Ankersmid sample elements. The heated line ensures that the gas components in the sample stream remain above their dew point and thereby eliminates the risk of condensation. This is a safe way to transport the sample to a heated analyzer or the special Ankersmid coolers. The electrically heated sample lines series ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The ASR25 is a peristaltic pump designed for continuous operation. Driven by a synchronous motor a system of pulleys pushes the condensate through a special tube with a very long runtime. These pulleys are pressed by 4 springs on the peristaltic tube. A running speed of 5 rpm guarantees that the two PVDF hose pulleys and the Novoprene® hose provide good mechanical and chemical resistance with ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The new range of AMP pumps are equipped with the patented stress-optimized structured diaphragm, resulting in a durable product of high pneumatic performance and compact size. Special valves ensure minimum resistance to flow. The pumps can be operated by either standard 230VAC, or for ex-proof applications, with a motor with various options on voltages and ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
With a team of dedicated specialists Ankersmid PANAM has always endeavoured to satisfy their customers ever widening demands with unmatched precision. With the latest in-house machinery and infrastructure under one roof, PANAM is manufacturing a wide range of Tube Fittings and Instrumentation products in different sizes and metals like brass, stainless steel, monel and in various other metals as ...
Manufactured by:Ankersmid Sampling BV based inWilrijk, BELGIUM
The Ankersmid digital gas conditioning system is a compact, • low-maintenance, self-monitoring and completely equipped units is suitable for variable and continuous operation in most ...