- Home
- Equipment
Refine by
Atys Xprt Equipment & Supplies
94 equipment items found
Manufactured by:Air Techniques International (ATI) based inOwings Mills, MARYLAND (USA)
Four-centistoke PAO (Chemical Abstract System ID 6864 9-12-7) reagents offer a U.S. Food & Drug Administration-approved alternative to DOP in FDA-regulated filter leakage testing applications. PAO is approved by the U.S. Army Surgeon General and is used by the United States military as a substitute for DOP in their filter and mask testing ...
Manufactured by:Air Techniques International (ATI) based inOwings Mills, MARYLAND (USA)
Inject aerosol into positively pressured ducts. The Positive Injection Pump (PIP) provides the user with a safe and reliable system for directing aerosol from a Thermal or Laskin-Nozzle Generator through a tube into the injection point. Speed control allows for regulation of the discharge velocity, which is essential when introducing aerosol through apertures of various size. The Positive ...
Manufactured by:Air Techniques International (ATI) based inOwings Mills, MARYLAND (USA)
Save time and reduce exposure with fixed installation ports. These ports are designed to assist aerosol injection into ducting or HVAC units for aerosol sampling of the upstream particle concentration. Designed to meet ISO 14644-3, ATI’s fixed installation ports can be added to new or existing installations to mitigate the risk of infection and exposure of non-filtered air into the clean space ...
Manufactured by:Air Techniques International (ATI) based inOwings Mills, MARYLAND (USA)
ATI offers the highest quality, industry-standard oil reagents for use in conjunction with oil aerosol generators. Our reagents are used for in situ leakage testing and production quality control efficiency testing of high efficiency air filters. ATI oil aerosol reagent products are suitable for government, nuclear, and FDA-regulated testing ...
Manufactured by:Air Techniques International (ATI) based inOwings Mills, MARYLAND (USA)
The 100X Automated Filter Tester is designed for test and quality control validation of filter media, replaceable particulate filters, and masks used in medical and industrial hygiene applications. The 100X meets leading global industry standards such as NIOSH 42 CFR Part 84, GB 2626, EN 13274-7:2019, and ASTM F3502-21. The 100X is a high capacity automated solution ideally suited to meet the ...
Manufactured by:ATI Group based inNew Holland, PENNSYLVANIA (USA)
When you measure the job site in acres this is the Level Best you want. The Level Best LBSE Series and LBDE Series have 60% more capacity than the next smallest ...
Manufactured by:DRS Laboratories, Inc. based inAllentown, PENNSYLVANIA (USA)
ATI Chlorine Dioxide Sensor 0-5/200 (20 PPM Standard). Please call or e-mail for current ...
Manufactured by:DRS Laboratories, Inc. based inAllentown, PENNSYLVANIA (USA)
ATI D16 – Porta-Sens III – Portable Gas Detector. PortaSens III Gas Detectors are supplied in a padded carrying case for easy storage and transport. Space is provided for an extra battery plus up to two sensor keepers, which means up to 8 extra sensors ready for immediate ...
Manufactured by:Analytical Technology - a brand by Badger Meter based inCollegeville, PENNSYLVANIA (USA)
ATI's D12 Toxic and Combustible Gas Transmitter will accept up to 46 different sensors, greatly reducing the need for multiple gas transmitter models. The self-aligning sensor holder simply plugs in, with automatic gas sensor recognition and verification when contact is made. ...
Manufactured by:Applied Technologies, Inc. (ATI) based inLongmont, COLORADO (USA)
The 'Sx' style Ultrasonic Anemometer is a 3 axis, 3d, 15 cm, scientific Ultrasonic Anemometer that has been designed for environmental monitoring where the horizontal wind measurements are required to be in the same plane. The W component measurement on the upwind side of the probe provides the most accurate and unobstructed value of vertical winds. The electronics are contained within the probe ...
Manufactured by:Applied Technologies, Inc. (ATI) based inLongmont, COLORADO (USA)
Applied Technologies, Inc. - Ultrasonic Anemometer - "V" Probe. The 'V' style Ultrasonic Anemometer is a 3 axis, 3d, 10 cm, scientific Ultrasonic Anemometer that is a special design for turbulence, where eddy measurements must be the smallest, for flux measurements in plant and forest canopies where wind speeds are very low and directions are highly unpredictable. The electronics are contained ...
Manufactured by:ATI Environnement based inGien, FRANCE
The destruction and energetic upgrading of industrial waste made of plastic, tar, resins, paints textiles ...
Manufactured by:Automation Technology, Inc. (ATI) based inHouston, TEXAS (USA)
ATI L & HDL series are piston operated valve actuators that use air pressure or natural gas to provide the force required to open, close and control rising stem ...
Manufactured by:Analytical Technology - a brand by Badger Meter based inCollegeville, PENNSYLVANIA (USA)
ATI’s Model Q40CT blind toroidal conductivity system is designed for online monitoring of chemically aggressive process solutions. This blind, analog version is ideally suited for applications where reliable instrumentation is critical and economy of installation is ...
Manufactured by:ATI Tank Hire Limited based inGreat Yarmouth, UNITED KINGDOM
Open topped and weir set tanks are used for settlement of silt and sand from ground water, polymers and any application where separation of solids from liquid is needed. Weir sets of three tanks are easy to transport as each tank fits inside each other like ‘Russian dolls’. Open top units are popular with construction site operators who like to be able to empty or dig out the ...
Manufactured by:ATI Tank Hire Limited based inGreat Yarmouth, UNITED KINGDOM
Depending on contents, acid tanks are fully lined with butyl rubber, fluoropolymer or low density ...
Manufactured by:Allegheny Technologies Incorporated (ATI) based inPittsburgh, PENNSYLVANIA (USA)
Our isothermal forging capability in Cudahy, Wisconsin features three isothermal presses, including one of the world's largest isothermal presses. The unique design of this strain-controlled, high-tonnage press, rated at 12,500 tons, allows it to forge larger-diameter, close tolerance forgings required for today's high efficiency jet engines. Our patented SuperCooler™ technology enables us ...
Manufactured by:Air Techniques International (ATI) based inOwings Mills, MARYLAND (USA)
The 5D Thermal Aerosol Generator is designed for operators who require a wide range of aerosol output concentrations to perform leak tests on smaller clean air cabinets through cleanroom air handling ...
Manufactured by:Air Techniques International (ATI) based inOwings Mills, MARYLAND (USA)
The 6D is a small, light, and rugged portable, self-contained Laskin-Nozzle aerosol generator with integrated compressor. It is ideal for testing a wide variety of filter systems with air flows up to 2,000 cfm by generating a polydispersed, submicron aerosol. Applications include workstations, negative pressure filtration units, biological safety cabinets, ceiling modules and more. It can also be ...
Manufactured by:Atys Medical based inSoucieu en Jarrest, FRANCE
ANGIOLYS offers demanding vascular professionals all the advantages expected from a modern and complete physiologic diagnosis equipment with automatic testing capabilities and network ...
