- Home
- Equipment
Refine by
Avanti Xprt Equipment & Supplies
15 equipment items found
Manufactured by:Cordis based inMiami Lakes, FLORIDA (USA)
The Cordis AVANTI+ Introducer is a pioneer of catheter sheath introducer technology. For use in arterial and venous procedures requiring percutaneous introduction of Intravascular devices. ...
Manufactured by:Alimak Group Denmark A/S based inThem, DENMARK
Avanti has produced ladders since 1885, and for more than 2 decades Avanti Wind Systems has produced ladders in aluminum for the Wind Turbine Industry. With great success – Avanti’s ladders can be found in turbine towers all over the world. The Avanti Ladder is a safe and rigid structure. The design is optimized ensuring strength in the stiles, in the rungs and in the connections ...
Manufactured by:Alimak Group Denmark A/S based inThem, DENMARK
Due to the easy-buckles, the harness is light, very easy to put on and easy to adjust to the body. The easy adjustment offers possibility to adjust body-length, seat position and position of the hip attachments. The harness also offers the possibility to adjust the position of the back attachment for better comfort and is equipped with a strengthened back support.In an emergency situation, the ...
Manufactured by:Alimak Group Denmark A/S based inThem, DENMARK
The Avanti Shark service lift is the most cost-effective wire guided service lift in the industry. The Avanti Shark service lift is approved according to the strictest European and American regulations. The Avanti Shark service lift can be customized to meet all customer demands. The Avanti Shark service lift has capacity for 2 persons - load capacity 240 Kg. The Avanti Shark service lift is ...
Manufactured by:Alimak Group Denmark A/S based inThem, DENMARK
The Climb Assistance system developed by Avanti Wind Systems makes it easier for technicians to climb up and down the ladders inside wind turbines. It must always be installed together with a fall protection system. ...
Manufactured by:Alimak Group Denmark A/S based inThem, DENMARK
The Avanti control panel with a special error display panel in the lift indicating errors or activated safety switches. The Avanti SWP service lift is delivered with the high-quality Avanti traction system which can be customised to specific customer need up to load capacity of 320 kg. The Avanti SWP is available in two sizes and capacities: L for 2 persons and 240 Kg load and XL for 3 persons ...
Manufactured by:Alimak Group Denmark A/S based inThem, DENMARK
Cost effective wire guided lift suitable for offshore installations. Send/call control from platforms and travelling cable ensuring stability, efficiency and easy operation for technicians working in offshore wind turbine towers The Dolphin service lift is delivered with the high-quality Avanti traction system. Traction wire ropes inside the lift makes wire inspection safe and easy for the ...
Manufactured by:Alimak Group Denmark A/S based inThem, DENMARK
The ladder guided lift from Avanti Wind Systems ensures that the lift cabin does not sway when travelling. Smooth movements are ensured while travelling up the tower. The system uses the existing safety ladder system to guide its travel ...
Manufactured by:Alimak Group Denmark A/S based inThem, DENMARK
The rack & pinion Pegasus service lift from Avanti delivers a high level of safety for technicians working in wind turbines. It can be used during construction and commissioning of the wind turbine tower. The service lift may be used to transport two or three people plus their tools and equipment to work at the most convenient height on the tower. The Pegasus lift is guided by the ladder and ...
Manufactured by:Alimak Group Denmark A/S based inThem, DENMARK
In most countries it is required by law that wind turbines must be equipped with a fall protection system preventing the service technicians from falling off the ladders in the turbine. Safe work in wind turbines always has top priority at Avanti Wind System. Therefore, Avanti has developed a safe Fall Protection System installed as part of the ladder. ...
Manufactured by:Beckman Coulter, Inc. based inBrea, CALIFORNIA (USA)
Covering all of the applications of a floor-standing centrifuge, the Avanti JXN-30 features rotor speed of 30,000 RPM and RCF greater than 100,000 x g. Master daily lab challenges with the advanced levels of networking, reliable performance, and improved BioSafety* found in the Avanti JXN-30. The additional power of the MobileFuge app gives additional flexibility, including the ability to: Access ...
Manufactured by:Avanti Orthopaedics, LLC based inPenn Valley, PENNSYLVANIA (USA)
The Avanti Wrist and Forearm System contains meticulously designed and manufactured, low-profile implants to address the variety of distal radius fractures encountered. In addition to offering a fixed-angle plate option, using a novel PEEK-Optima insert, rigid variable-angle fixation is also available. Shaft screw biplanar angulation ensures secure fixation, while far-cortical locking screws ...
Manufactured by:Avanti Orthopaedics, LLC based inPenn Valley, PENNSYLVANIA (USA)
The Avanti Wrist & Forearm System contains meticulously designed and manufactured implants to address the variety of wrist pathology encountered by today’s surgeons. The Spanning and Fusion plates are very low profile to facilitate application and reduce soft tissue complications. Far-cortical locking screws reduce construct rigidity to reduce stress shielding and promote rapid bone ...
Manufactured by:Avanti Orthopaedics, LLC based inPenn Valley, PENNSYLVANIA (USA)
The Avanti Wrist & Forearm Set contains meticulously designed and manufactured implants to address the variety of forearm pathology encountered by today’s surgeons. The straight and curved forearm plates are very low profile to facilitate application and to reduce soft tissue complications. Far-cortical locking screws maintain the benefits of locked fixation while reducing construct ...
Manufactured by:Avanti Orthopaedics, LLC based inPenn Valley, PENNSYLVANIA (USA)
The Avanti Orthopaedics Ulnar Shortening System contains meticulously designed and manufactured components to address a variety of clinical problems resulting in ulnar-sided wrist pain. Incorporating many of Avanti’s innovative concepts found in our other products such as bidirectionally-angled fasteners, far-cortical locking fixation and a very low-profile plate, the Ulnar Shortening ...