- Home
- Equipment
Refine by
Bender Xprt Equipment & Supplies
11 equipment items found
Manufactured by:General Equipment & Supply based inSimpsonville, SOUTH CAROLINA (USA)
Gardner Bender B2000 Cyclone Electric-Powered Bender Complete. 1/2" - 2" EMT. Rigid, ...
Manufactured by:BENDER-Armaturen GmbH und Co. KG based inLennestadt, GERMANY
acc. to DIN EN 1213, Material acc. to DIN 50930-6 rather currently valid UBA positive list, female-thread, rising brass Upper-part, without Drain valve, DIN-DVGW certified (½" - 2"), noise-class apprival class 1, Nominal pressure PN 16, EPDM sealings with KTW / W270 approval, max. operating temperature ...
Manufactured by:BENDER-Armaturen GmbH und Co. KG based inLennestadt, GERMANY
Material acc. to DIN 50930-6 rather currently valid UBA positive list, with female-thread, rising brass Upper-part, without Drain valve, Nominal Pressure PN 10, EPDM sealings with KTW / W270 approvals, max. operating temperature ...
Manufactured by:BENDER-Armaturen GmbH und Co. KG based inLennestadt, GERMANY
Material acc. to DIN 50930-6 rather currently valid UBA positive list, Teflon, Ball shutoff device with limit stop, position indicator, completely flowrate, DN ...
Manufactured by:Bender Inc. based inExton, PENNSYLVANIA (USA)
The ISOSCAN® EDS440 Series by Bender offers advanced ground-fault location capabilities for ungrounded AC and DC systems. Integrating with Bender's ground-fault detectors and current transformers, this module can identify faults across up to twelve channels simultaneously without disconnecting equipment. Benefit from continuous online fault detection using a special measurement signal ...
Manufactured by:Bender Inc. based inExton, PENNSYLVANIA (USA)
The CMGF420 from Bender is a control-powered, UL 1053 listed service entrance relay designed specifically for grounded electrical systems. Functioning as a critical component for ground fault detection and interruption, this relay can be combined with a normally open (N/O) shunt trip breaker, both to identify and disconnect the power supply at the main entrance of an electrical system upon fault ...
Manufactured by:BENDER-Armaturen GmbH und Co. KG based inLennestadt, GERMANY
acc. to DIN EN 1213, Material acc. to DIN 50930-6 rather currently valid UBA positive list, body DN 25, rising as well as dead storage free brass upper-part with grease chamber, with Drain valve 1223, DIN-DVGW certified, noise-class approval class 1, Nominal pressure PN 16, EPDM sealing with KTW / W270 approval, max. operating temperature ...
Manufactured by:BENDER-Armaturen GmbH und Co. KG based inLennestadt, GERMANY
acc. to DIN EN 1213, Material acc. to DIN 50930-6 rather currently valid UBA positive list, with female-thread, dead storage free Upper-part with grease chamber, chrome-plated sleeve, rosette, chrome-plated hood-handle as well as plugs blue/red, installation depth until ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
CSA approved. Std 7 or 10 minute wash cycle. Electro-mechanical timing. 24 hr clock for auto pre-sanitize. Combine with 3 peristaltic pump ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Part# 40455. Solid-state programmable timing. Adjustable rinse. Adjustable drain, and wash cycles. 24 hour clock for auto pre-sanitize. Combine with 3 peristaltic pump ...
Manufactured by:Bender Inc. based inExton, PENNSYLVANIA (USA)
The iso685 series by Bender is a state-of-the-art ground-fault detector tailored for ungrounded AC and DC systems, including those with power conversion components like variable frequency drives and inverters. Built with the latest monitoring technology, the iso685 ensures precise insulation resistance measurements applicable to diverse power systems and control environments. This detector ...