- Home
- Equipment
Refine by
Binder Xprt Equipment & Supplies
44 equipment items found
Manufactured by:Binder Group GmbH based inUlm, GERMANY
The COMBIMASS GA-s hybrid premium air monitoring analyzer station consists of a ventilated cabinet for the cyclic analysis of the air of 1 up to 4 fermenters for indoor installation with an integrated display and flexible measuring program. The gas modules have an integrated maintenance diagnosis whereby the wear is signaled by the traffic light colours. Transmission of data and alarms is ...
Manufactured by:Binder GmbH based inTuttlingen, GERMANY
The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness. The cooled incubators of the KT series are state-of-the-art in application and protect the ...
Manufactured by:Binder GmbH based inTuttlingen, GERMANY
Uniform drying conditions thanks to APT.line™ technology. Identical test conditions throughout the chamber interior independent of sample size and quantity. Outstanding thermal insulation saves operation costs. Advanced programming ...
Manufactured by:Binder GmbH based inTuttlingen, GERMANY
The powerful virtuoso in cooling incubators for microorganisms: the KB masters temperature ranges from -10 °C to 100 °C. The new KB series consumes up to 30% less energy compared to its predecessor. With its extensive programming options and homogenous incubation conditions even when fully loaded, this cooling incubator covers a wide range of ...
Manufactured by:Binder Co AG based inGleisdorf, AUSTRIA
Screw classifiers or dewatering screws are used for simultaneous cleaning and dewatering of sand from upstream, brewed screening machines or for dewatering of cycloned sands. The deslurried coarse sand product is conveyed by the screw against gravity and discharged well dewatered at the upper end of the trough. The fine slurry overflowing at the lower end of the trough contains the majority of ...
Manufactured by:Binder Co AG based inGleisdorf, AUSTRIA
An optimum cullet grain size of 10 to 50 mm is crucial for sensor-supported separation since a higher content of fines (0-10 mm) would have an unfavourable effect on sorting performance. The double roll crusher from Binder+Co provides for an optimum comminution curve of cullet as well as low energy requirement, long service life and low wear. Furthermore, the double roll crusher breaks glass ...
Manufactured by:Binder Energietechnik GmbH based inBärnbach, AUSTRIA
BINDER offers Transport Augers in different variants. The transport auger is the part of the boiler that takes the fuel of a discharge unit and transports it towards the boiler. It consists of a screw conveyor, which is carried in a steel duct. At the end of the auger, the ejection opening, which ensures the transition to other transport units is located at the bottom. A clog detection sensor is ...
Manufactured by:Binder Co AG based inGleisdorf, AUSTRIA
BIVITEC e+ big on effect, small on consumption. The latest flip-flow screen scores with low dynamic loads, compact design and efficient screening performance even with feed material that is difficult to ...
Manufactured by:Binder Co AG based inGleisdorf, AUSTRIA
The BIVITEC flip flow screen comes into its own when conventional screening technology starts to be inefficient and uneconomical. Particularly challenging tasks are solved in a simple and efficient way. The BIVITEC flip flow screen ensures selective screening of bulk materials which are difficult to ...
Manufactured by:Binder Co AG based inGleisdorf, AUSTRIA
The Binder+Co circular vibrating screens are typical vibrating screens. They work according to the ejection principle and carry out a circular movement. Speed and amplitude of the vibration can be adjusted according to screening task. The adjustable unbalanced masses ensure ...
Manufactured by:Binder Group GmbH based inUlm, GERMANY
The VACOMASS square diaphragm control valve is a technically optimized sliding gate control valve with a falling flow axis and gas-tight shut-off using a square shaped control aperture. It is used for precise and low-loss control of airflow and distribution in the aeration tanks of a wastewater treatment plant (design according to DIN EN ...
Manufactured by:Binder Group GmbH based inUlm, GERMANY
The VACOMASS elliptic diaphragm control valve is a technically optimized control valve, especially developed for aeration air, closing gas-tight with a lenticular control aperture. Low pressure drop in the whole control range and high flow rate capacity for flexing and cleaning the diffuser with very low pressure drop are two of the main features (design according to DIN EN ...
Manufactured by:Binder Group GmbH based inUlm, GERMANY
The COMBIMASS syngas measuring system is a device combination in intermediate flange design and consists of two sensors: a heat conductivity sensor in the steady flow zone and a thermal sensor in the gas flow. The heat conductivity sensor determines the changing H2 concentration in the gas approximately and corrects the measurement signal of the thermal sensor ...
Manufactured by:Franz Binder GmbH + Co. Elektrische Bauelemente KG based inNeckarsulm, GERMANY
Snap-In Male panel mount connector, Contacts: 3, unshielded, solder, ...
Manufactured by:Franz Binder GmbH + Co. Elektrische Bauelemente KG based inNeckarsulm, GERMANY
The Snap-In Male cable connector features 3 contacts and accommodates cable sizes 2.5-4.0 mm. It is an unshielded connector designed for solder connections and is rated IP67, ensuring it is dust tight and protected against temporary immersion in water. The device has received certification from both UL and VDE, highlighting its compliance with safety standards. The connector is suitable for ...
Manufactured by:Binder Group GmbH based inUlm, GERMANY
Using the COMBIMASS hot tapping unit, the flowmeter can be removed gastight during operation for check and maintenance. It is available in three different sizes for sensors 12, 18 and 25 ...
Manufactured by:Binder Group GmbH based inUlm, GERMANY
The analyzer station COMBIMASS GA-s hybrid syngas has a completely modular design. All pumps, valves and electronic modules are individually mounted on top-hat rails for easy maintenance. The gas cells are installed also in top-hat rail ...
Manufactured by:Binder Group GmbH based inUlm, GERMANY
The basic, modular COMBIMASS GA-s hybrid eco air monitoring analyzer station consists of a cabinet for analysis of the supporting air from 1 or 2 fermenters. It is a station for indoor installation with a fixed measuring programme. Data and alarm transmission as well as a warning light complete the station for a safe ...
Manufactured by:Binder Group GmbH based inUlm, GERMANY
When blanketing in sterile areas further design features are required in addition to the high, electropolished surface quality and the materials required especially for the food and pharmaceutical industries. INSTRUM stainless steel pressure regulators offer GMP-compliant design to minimize or eliminate germinated ...
Manufactured by:Binder Co AG based inGleisdorf, AUSTRIA
Sand production in a Binder+Co SANDEXX double sand trap is efficient and energy-saving. Efficient because cleaning and dewatering are carried out in one operation, utilising a large pool area and gravity sedimentation. In addition to the low operating costs, the double sand trap from Binder+Co convinces with exceptionally low maintenance costs. The SANDEXX sand trap reliably dewaters and cleans ...