- Home
- Equipment
Refine by
Cat Xprt Equipment & Supplies
112 equipment items found
Manufactured by:Liquid Waste Technology LLC - Mud Cat based inNew Richmond, WISCONSIN (USA)
LWT is a leading provider of dredges for various applications across the world. LWT manufactures the man-operated, diesel-powered Mud Cat 100 to help remove accumulated solids and sediment from lagoon and waterway systems. The Mud Cat 100 can be equipped with radio remote control features to improve ...
Manufactured by:Liquid Waste Technology LLC - Mud Cat based inNew Richmond, WISCONSIN (USA)
With over 30 years of design, manufacturing and field experience, LWT understands and embraces the demand for quality, reliability and ease of maintenance in its products and solutions for its customer base. With this in mind, LWT manufactures the Mud Cat 745 for applications that require a deeper operation depth and greater production ...
Manufactured by:Liquid Waste Technology LLC - Mud Cat based inNew Richmond, WISCONSIN (USA)
The Mud Cat™ 2010 provides 22,000 inch-pounds of auger torque for difficult sediment removal applications. This auger dredging system was designed to perform in heavy process and remediation type projects. Lagoon dredging can be achieved at depths up to 20 feet. The 325HP diesel with its hydraulically driven submersible slurry pump is designed to pass 3 inch solids while delivering 2500 GPM ...
Manufactured by:Cat Pumps based inMinneapolis, MINNESOTA (USA)
Cat Pumps 60 Frame liquid handling, triplex plunger pumps have now expanded to 75 ...
Manufactured by:Ingenieurbüro CAT M. Zipperer GmbH based inBallrechten-Dottingen, GERMANY
Our smallest magnetic hotplate stirrer. Super small footprint, maintenance free brushless motor and a non-corrosive ...
Manufactured by:Clean Air Technology, Inc. based inCanton, MICHIGAN (USA)
Ceiling mounted HEPA (High Efficiency Particulate Air) filters provide 99.99% efficiency in removing particles 0.3 microns or larger. HEPA filters are evenly distributed across the cleanroom ceiling in sufficient quantities to meet the particular ISO cleanliness standards. HEPA filters can also be grouped or concentrated over your cleanroom to provide a special clean ...
Manufactured by:Clean Air Technology, Inc. based inCanton, MICHIGAN (USA)
Our standard doors are constructed of cleanroom grade anodized aluminum; 1.75" thick, with bottom flush solid panels, 1/4" thick safety glass, half glass, sloped sills, stainless steel hinges, push/pull hardware, and door closers. Aluminum doors eliminate the problems of paint chipping and scratching, and are easy to keep clean. Hollow metal, painted steel, stainless steel, automatic or manually ...
Manufactured by:Clean Air Technology, Inc. based inCanton, MICHIGAN (USA)
Our standard ceiling system/grid consists of 1-1/2" wide gasketed extruded anodized aluminum that is locked together using aluminum bent-tab clips. The cleanroom ceiling system can be suspended from the top deck or other structure to support the lights, HEPA filters, and ceiling tiles. Other cleanroom ceiling grid such as chemical resistant, fiberglass and stainless steel are available upon ...
Manufactured by:Clean Air Technology, Inc. based inCanton, MICHIGAN (USA)
Our standard intercom system consists of one "Master" call station which is typically mounted outside of the cleanroom and any number of "sub" or "door" stations which can be installed throughout the cleanroom with a maximum distance of 1,600 feet away from the Master call station. Sub stations are fully weather proof to stand up against aggressive cleaning procedures inside of the cleanroom. ...
Manufactured by:Clean Air Technology, Inc. based inCanton, MICHIGAN (USA)
Our central vacuum system consists of 2" metal vacuum piping built into our wall panels and connected to the wall ports. Extract ports located in the modular wall panels are capped with spring tension covers, and are wired with 24-volt plenum cable for auto activation at point of use. The vacuum canister and motor is located outside of the cleanroom for ease of cleaning and maintenance. Included ...
Manufactured by:Clean Air Technology, Inc. based inCanton, MICHIGAN (USA)
Gas, DI, compressed air, nitrogen, water, etc. can all be easily pre-installed in our modular wall panels for connection in the field to your building supply. Stainless Steel, copper, black iron, PVC all can be sized to meet your production ...
Manufactured by:Clean Air Technology, Inc. based inCanton, MICHIGAN (USA)
All ductwork is fabricated and assembled without gaps at corners and joints utilizing the bolted flange duct joining system, providing flanged and gasketed joints for low leakage and ease of disassembly and relocation if required at a later date. Ductwork inside the negative return air plenum is installed clean and is ...
Manufactured by:Clean Air Technology, Inc. based inCanton, MICHIGAN (USA)
Modular Load Bearing Walls - At the center of our cleanroom design is our pre-fabricated modular, load-bearing, air return partition wall system. Sealed modular wall panels form the wall and provide built-in air return chases. Our modular, load bearing air return wall system is specifically designed and manufactured for cleanrooms. It provides a low wall or raised floor air return concept with ...
Manufactured by:Clean Air Technology, Inc. based inCanton, MICHIGAN (USA)
Cleanrooms are classified into 2 categories of air pressurization, positive and negative air pressure cleanroom HVAC ( Heating, Ventilating and Air Conditioning ) systems. Positive air pressure cleanrooms systems are normally used for Electronics, Aerospace, Optics, Military and Defense applications, and Research, etc., where the air escaping from doors, ceilings, or walls, due to the positive ...
Manufactured by:Clean Air Technology, Inc. based inCanton, MICHIGAN (USA)
Our dryrooms feature designs for precise, continuous, low dew point and temperature control for any moisture sensitive application that you require. Our modular, insulated dryrooms are now the standard in many industries, where we’ve engineered many dryrooms to custom specifications. We’ll utilize all of our experience and accumulated knowledge for your project, working closely with ...
Manufactured by:Clean Air Technology, Inc. based inCanton, MICHIGAN (USA)
Clean Air Technology is adept at designing and fabricating the "right" heating, cooling, and ventilation system for your cleanroom operation in a wide variety of industries. And getting the specification and design right the first time is very important since HVAC is integrated into a building's framework, making modifications both time consuming and expensive. Additionally, the design, ...
Manufactured by:Clean Air Technology, Inc. based inCanton, MICHIGAN (USA)
Our standard cleanroom window is 36" x 36" tempered safety glass wrapped in anodized aluminum frames and 4" radius corners. These are pre-manufactured in our modular wall panels before arriving to your facility. An excellent feature is that the double pane window can be utilized for return air chases as well as an aesthetically appealing look. Custom cleanroom window sizes, colors, and materials ...
by:Alps Ecoscience based inWokingham, UNITED KINGDOM
Eco-Cat™ is a bio-catalyst that provides a highly effective solution to treat fats, oils, and greases (FOGs) and hazardous odors (VOCs) within wastewater treatment and collection systems, sludge and residuals handling and dewatering. Eco-Cat™ solubilizes fats, oils and greases (FOGs) through the breaking of ester molecular bonds, making these waste components more available to a ...
Manufactured by:Liquid Waste Technology LLC - Mud Cat based inNew Richmond, WISCONSIN (USA)
The Mud Cat Diesel Powered Auger Dredges are available up to 425 HP using quiet, clean burning Tier 3 engines. Operator cabs include air conditioning, air ride seats, electronic controls and easy to read gauges. All Mud Cat dredges can be configured with custom automation for increased ...
by:BIO-CAT based inTroy, VIRGINIA (USA)
Application Agriculture, Animal Feed, Cleaning, Dietary Supplements, Food, Beverage & Ingredients, Waste Treatment. Origin Aspergillus oryzae. Description A complex mixture of both exo- and endo-proteases that hydrolyzes proteins. pH Optimum 2.5 – 6.5. Temp. Optimum °C 25 – ...