- Home
- Equipment
Refine by
Cs Xprt Equipment & Supplies
128 equipment items found
Manufactured by:CS Combustion Solutions GmbH based inWien, AUSTRIA
CS Combustion Solutions builds hot gas generators based on many years of experience and further development. The hot gas generators are used where products have to be dried or plant components such as catalysts have to be heated up and brought to temperature. ...
Manufactured by:CS Combustion Solutions GmbH based inWien, AUSTRIA
The OXISPRAY nozzle system works with oxygen instead of compressed air or ...
Manufactured by:CS Combustion Solutions GmbH based inWien, AUSTRIA
This burner works with oxygen instead of air. After commissioning with a support fuel such as natural gas or heating oil, this burner works with almost any combustible fuel. This process can be retrofitted without having to install a new burner block in the existing combustion chamber. With the special PreCOMB muffle system, it is possible to run additional fuel ...
Manufactured by:CS Combustion Solutions GmbH based inWien, AUSTRIA
Our in-house EI&C department will gladly take over the technical planning and design of the required instrumentation for your burner system. CS supplies everything from loose fittings to fully piped, frame-mounted fuel control stations. We use products of the highest standards from our valve and measurement technology partners, or use manufacturers specified by the customer. Design and ...
Manufactured by:McNeilus Steel, Inc. based inDodge Center, MINNESOTA (USA)
This specification covers hot-rolled carbon steel sheets of commercial quality, in coils and cut lengths, having a maximum carbon of 0.15%. This material is intended for parts where bending, moderate forming or drawing, and welding may be ...
Manufactured by:CS Combustion Solutions GmbH based inWien, AUSTRIA
Designed specifically for operation with preheated combustion air, this burner series can have combustion air temperatures above 350°C up to 600°C. The air box of this burner is lined with fireproof concrete to prevent overheating - and above all to prevent unacceptable expansion - of the burner ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
Volumetric liquid ring pump with stellar impeller which gives the pump considerable suction capacity. Particularly suitable for liquid transfer (even volatile) ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
Selfpriming Peripheral pumps suitable for small domestic systems and for modest industrial applications; characterized by a remarkable relationship between the services offered and the power ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
Centrifugal single-impeller centrifugal pumps at medium and high flow, characterized by 2", 3" and 4" delivery ports; they find primary application in the field of agriculture and whenever a substantial flow is ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
Extremely silent single-impeller centrifugal pumps suitable for civil and industrial domestic applications with an extremely flat curve that guarantees almost constant pressures when the flow rate ...
Manufactured by:Pingxiang Central Sourcing Ceramic Co., Ltd. based inPingxiang, CHINA
MLM's parallel-plate structure packs more ceramic material into each cubic foot-up to 80% more than saddles-with less resistance to air flow. The result is a unique combination of high heat capacity, rapid heat transfer, low pressure drop, and great resistance to plugging by ...
Manufactured by:Pingxiang Central Sourcing Ceramic Co., Ltd. based inPingxiang, CHINA
Ceramic Saddle Ring It has excellent acid resistance and heat resistance. It can resist to corrosion of various inorganic acids, organic acids and organic solvents except hydrofluoric acid, and can be used in high or low temperature conditions. High Quality Ceramic Intalox Saddle Super Intalox ring in Sulfuric Acid Environment Chemical tower column packing ...
Manufactured by:Pingxiang Central Sourcing Ceramic Co., Ltd. based inPingxiang, CHINA
Producing many kinds of Line Insulators(SHACKLE INSULATOR), Substation & Power System Insulators. With features of good insulation performance, excellent weatherability, high heat resistance, easy to be installed and etc. SHACKLE INSULATOR included ED-1,ED-2,ED-3,ED-4 and etc. China wholesale overhead line low voltage electrical 11kv 20kv ED-2B ED-2C disc spool shackle Porcelain ceramic ...
Manufactured by:Pingxiang Central Sourcing Ceramic Co., Ltd. based inPingxiang, CHINA
Producing many kinds of Line Insulators(POST INSULATOR), Substation & Power System Insulators. With features of good insulation performance, excellent weatherability, high heat resistance, easy to be installed and etc. POST INSULATOR included 57-1,57-2,57-3,57-4 and etc. Quality busbar ANSI 57-11 57-12 57-13 57-14 57-15 57-16 57-25 57-26 High Voltage Line ceramic Porcelain station Post ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
Suitable for the most varied needs in the civil, agricultural, industrial or plant engineering in general. They can be coupled to 2-pole motors.. Usage areas: power plants, agricultural Irrigation and drainage, oil industry, building system, water, treatment and pressurization, mining, chemial industry, heating, ventilating and air conditioning, marine, fire fighting, food and beverage ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
Automatic operation pressurization units made with centrifugal or self-priming electric pumps. Each unit, ready for installation, consists of an electric pump, a pre-set and adjustable pressure switch, a pressure gauge, a fitting (and possibly a flexible hose with a stainless steel sheath), a membrane tank and a cable with plug. The characteristics and performances depend on the type of ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
Electric pump complete with electronic pressure-flow controller, which is equipped with internal pressure and flow sensors and a small autoclave for water ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
Pressurization systems with constant pressure maintenance controlled by an easy to apply and adjust inverter. The characteristics and performances depend on the type of electricpump installed. ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
Drainage pumps with recessed impeller type Vortex or Two-channel for pumping charged water and liquids with suspended bodies; ideal for civil and domestic ...
Manufactured by:CS Waterpumps srl based inCavallara (MN), ITALY
Drainage pumps for charged liquids with Vortex or two-channel impeller for civil and industrial applications; they have been particularly designed for extremely heavy use; available both for mobile and fixed applications with coupling ...