- Home
- Equipment
Refine by
Climatic Xprt Equipment & Supplies
33 equipment items found
Manufactured by:Aralab based inAlbarraque, PORTUGAL
The Aralab range of TESTA TT/CT reach-in chambers for temperature and environmental testing, offers the ideal solution for thermal or climatic testing, simulation and exposure to weather, temperature cycles, aging testing and stress ...
Manufactured by:Aralab based inAlbarraque, PORTUGAL
With superior construction and durability, they allow the performance of thermal or climatic tests, simulation and exposure to weather, temperature changes, aging tests and stress ...
Manufactured by:Climate Tanks based inBuford, GEORGIA (US) (USA)
The tank consists of galvanized steel panels and is fixed together with bolts. The tank is lined with a PVC liner that is fixed to the top of the tank through reinforced eyelets. Polyester geo-textile matting is placed on the bolted steel tank floor or foundation and walls to protect the liner from damage during installation and use. Roof is a fixed rigid design consisting of steel decking of ...
Manufactured by:Climate Tanks based inBuford, GEORGIA (US) (USA)
Climate Tanks. manufacturers a variety of access hatches for roof top and side wall bulk head for steel bolted tanks. We can manufacture from a variety of materials, but usually manufacture with a composite plastic, galvanized steel, or PE ...
Manufactured by:Climate Tanks based inBuford, GEORGIA (US) (USA)
Climate Inc has many tank fittings and tank accessory product lines that are designed to augment our wide selection of storage tanks, making it easy to quickly and efficiently turn any of the storage units into complete operating rainwater harvesting and liquid storage systems. Use any of our water treatment products to ensure your stored water is clean, fresh, healthy and enjoyable. Take the ...
Manufactured by:Climate Tanks based inBuford, GEORGIA (US) (USA)
An entry used exclusively for personnel to travel form the shaft bottom, drift mouth, or the roof to the working section inside of a ...
Manufactured by:Climate Tanks based inBuford, GEORGIA (US) (USA)
This device meets most plumbing code that requires an air gap separation between potable and non-potable water ...
Manufactured by:Dalrada Climate Technology (DCT), a subsidiary of Dalrada (DFCO) based inEscondido, CALIFORNIA (USA)
Dalrada's industrial heat pumps provide simultaneous heating and cooling without combustion and can replace water heaters, steam boilers, chillers and cooling towers. This revolutionary technology uses a non-toxic, non-flammable, environmentally friendly natural refrigerant that’s completely CFC and ...
Manufactured by:Climate Control Systems Inc. based inLeamington, ONTARIO (CANADA)
Aspirated temperature and humidity sensors are available with weather proof connectors. These sensors are highly accurate and maintenace ...
Manufactured by:Lennox International Inc. based inRichardson, TEXAS (USA)
Opening a window can make your air feel less stuffy, but this isn’t practical during the hotter and colder months of the year, plus it invites pollen and other allergens into your home. A Healthy Climate® energy-recovery ventilator (ERV) helps keep your air fresh without creating a potentially uncomfortable ...
Manufactured by:Climats based inMartillac, FRANCE
Volumes from 3 to 100 m³. Temperature from -70°C to +150°C. CLIMATS metallic structure enabling to function up to +150°C ...
Manufactured by:Climats based inMartillac, FRANCE
WINCAL, a flexible and adapt walk-in chamber. With WINCAL choose your hot-cold or hot-cold-humidity chamber from among standard test volumes from 2 m3 to 16 m3 with an extended temperature range of -80°C to +20°C (as an option) and a relative humidity rate of +10% to +98% ! Benefit from easy loading for your voluminous test elements while achieveing high performances. 5 standard test ...
Manufactured by:Climate Control Systems Inc. based inLeamington, ONTARIO (CANADA)
The Climate Manager is a process control computer capable of measuring and controlling heating and cooling, vents, fans, Co2, boilers, lighting, shading, heating on-off valves or modulation hot water ...
Manufactured by:Climate Control Systems Inc. based inLeamington, ONTARIO (CANADA)
These digital meters provide programmable relays to control equipment as required. They can easily control pumps, injectors, alarms, and other equipment. The digital display readout always shows you what is going on in the processes. The built in relays allow you to program Hi-Low alarms or control equipment. They all have 4~20 mA outputs for connecting to the Fertigation Manager program or any ...
Manufactured by:Irritrol based inRiverside, CALIFORNIA (USA)
For simple, water-saving, weather-following, automatic irrigation control, Irritrol introduces the Climate Logic Weather Sensing System. Consisting of three components–a wireless transmitting weather sensor for installation outdoors, a receiver module to attach to the Irritrol controller, and an SD card with the 10-year, local historical weather information–the system monitors weather ...
Manufactured by:Climate Tanks based inBuford, GEORGIA (US) (USA)
Fused glass is glass that has been fired (heat-processed) in a kiln at a range of high temperatures from 593 °C (1,099 °F) to 816 °C (1,501 °F). There are 3 main distinctions for temperature application and the resulting effect on the ...
Manufactured by:Climate Tanks based inBuford, GEORGIA (US) (USA)
Epoxy is either any of the basic components or the cured end products of epoxy resins, as well as a colloquial name for the epoxide functional group. Epoxy resins, also known as polyepoxides, are a class of reactive prepolymers and polymers which contain epoxide groups. Epoxy resins may be reacted (cross-linked) either with themselves through catalytic homopolymerisation, or with a wide range of ...
Manufactured by:Climate Tanks based inBuford, GEORGIA (US) (USA)
Powder Coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a ...
Manufactured by:Climate Tanks based inBuford, GEORGIA (US) (USA)
Weathered steel, often referred to by the genericized trademark COR-TEN steel and sometimes written without the hyphen as corten steel, is a group of steel alloys which were developed to eliminate the need for painting, and form a stable rust-like appearance if exposed to the weather for several years. Weathering refers to the chemical composition of these steels, allowing them to exhibit ...
Manufactured by:Climate Tanks based inBuford, GEORGIA (US) (USA)
Climate Tanks. manufacturers a variety of access hatches for roof top and side wall bulk head for steel bolted tanks. We can manufacture from a variety of materials, but usually manufacture with a composite plastic, galvanized steel, or PE 100. We can manufacture in various sizes to exceed all specifications for AWWA D-103, NFPA-22, and EU standards with minimums typically at twenty-four inch ...