- Home
- Equipment
Refine by
Applications
- Smoke generator devices for lev testing, spray booth clearance testing & air tracing
- Smoke generator device for leak testing & building envelope testing
- Smoke generator device for building envelope, energy studies & air tightness testing
- Smoke generator device for clean room solutions
- Smoke generator device for fire training, emergency evacuation & BA training
- Smoke generator device for PPV & impulse ventilation testing
- Smoke generator device for hot fire training
- Smoke generator device for wind tunnel studies
- Smoke generator device for large scale external exercises and tunnel testing
- Smoke generator device for smoke detector testing
- Smoke generator device for maritime shipboard fire training
- Smoke generator device for oil mist generation
Concepts Xprt Equipment & Supplies
149 equipment items found
Manufactured by:Concept Smoke Systems | Concept Engineering Ltd. based inMaidenhead, UNITED KINGDOM
The VC Aero Micro is the smallest thermal aerosol generator on the market. Its class leading output range makes it the perfect tool for operators challenging a variety of AHU installations. An intelligent PID controller allows operators to adjust temperature ranges to suit different aerosol reagents (Ondina, PAO, DEHS) as well as the ability to set aerosol on / off periods. The equipment is ...
Manufactured by:Concept Smoke Systems | Concept Engineering Ltd. based inMaidenhead, UNITED KINGDOM
The Concept SDTS is based on the best selling ViCount Hi temperature smoke system. Unlike conventional water based smokes, the smoke produced by the Concept SDTS is resistant to extremely high temperatures. The unit requires an inert propellant gas, and is supplied complete with a CO2 cylinder and regulator. It is capable of simply and repeatedly creating nontoxic artificial smoke, from small ...
Manufactured by:Concept Smoke Systems | Concept Engineering Ltd. based inMaidenhead, UNITED KINGDOM
The resulting smoke from the ViCount is extremely persistent, depending on the grade of Smoke Oil selected, the smoke produced by the ViCount can persist to 200°C (compared to typical water based smoke systems 40-50°C) before layering / evaporation commences, making the unit ideally suited to hot fire training applications. It is also used during carbonaceous burns to top up smoke levels ...
Manufactured by:Concept Smoke Systems | Concept Engineering Ltd. based inMaidenhead, UNITED KINGDOM
The Concept OPL 100 unit is designed to measure the density of smoke, dust, mist or fog between a given area. The system is low maintenance, double pass, dual beam transmissometer that consists of a transceiver (transmitter / receiver), and a passive retroreflector module. These components are stack mounted which are then interfaced with the control unit. The transceiver produces an ...
Manufactured by:Concept Smoke Systems | Concept Engineering Ltd. based inMaidenhead, UNITED KINGDOM
Concept's range of temporary waterproof covers have been designed to fit: ViCount Smoke Generator. Vulcan Smoke Generator . Spirit 900 Smoke ...
Manufactured by:Concept Smoke Systems | Concept Engineering Ltd. based inMaidenhead, UNITED KINGDOM
The Mini Colt 4 is a more compact version of our best selling Colt 4 model which is recognised world wide for fire training, air flow visualisation, small - medium scale leak tests etc. It incorporates a handle with an integral push button switch for smoke generation. Like the Colt, it has the ability to produce a considerable quantity of smoke off power once preheated, using the retained ...
Manufactured by:Concept Smoke Systems | Concept Engineering Ltd. based inMaidenhead, UNITED KINGDOM
The Spirit 900 is well suited to applications where continuous, high smoke output is required, since it utilises a continuously rated pump. Like the Concept Colt 4, it generates the most persistent water based smoke of any smoke machine available. Typical water based smoke systems are resistant to temperatures of 35-45°C where as the Spirit 900 using fluid A is still effective when ...
Manufactured by:Concept Smoke Systems | Concept Engineering Ltd. based inMaidenhead, UNITED KINGDOM
This smoke generator was designed to facilitate the observation of air movements and air tracing in many types of air flow situations, primarily in wind tunnels. The unit is easily transported, has a rapid warm up time and simple to set up and use, and produces a controllable, non hazardous smoke effect. The Concept Aerotech Smoke Wand produces a point source of smoke on the end of a 425mm long ...
Manufactured by:Concept Smoke Systems | Concept Engineering Ltd. based inMaidenhead, UNITED KINGDOM
Concept's ViCount and Vulcan oil based smoke generators use an inert gas such as CO2 as a carrier for the smoke fluid when it is passed through the heat exchanger. The ViCount and Vulcan smoke generators are typically used for large scale exercises and Fire Training applications, where continuous, quality smoke output is required. When Carbon Dioxide (CO2) passes through the cylinder valve, the ...
Manufactured by:Concept Smoke Systems | Concept Engineering Ltd. based inMaidenhead, UNITED KINGDOM
The Concept VBL6 Centrifugal Blower is an impressive, smoke sealed, continuously rated centrifugal fan for distributing smoke rapidly and evenly through ductwork into training buildings, simulators etc. Up to 30m of 75mm ID ductwork can be used with this ...
Manufactured by:Filter Concept Pvt. Ltd. based inAhmedabad, INDIA
PP Pleated and glass fiber cartridges are designed for higher filtration area & high throughput. It has a 6 inch/152mm large diameter, is a coreless, single open-ended structure with an inside-to-outside flow pattern. Due to its large diameter with a big filter area, it requires lesser elements for a given flow rate than the standard cartridges diameter. Due to lesser elements, the Filter ...
Manufactured by:BioZyme Incorporated based inSt. Joseph, MISSOURI (USA)
Contains AO-Biotics® Amaferm®, a prebiotic research-proven to enhance digestibility. Contains the Concept-Aid sheep mineral package in a 16% natural protein tub. Supports embryo production and conception using organic trace minerals and high levels of vitamin ...
Manufactured by:Concept Equipment Limited based inRustington, UNITED KINGDOM
The EN ISO 6940 and 6941 tests are extensively applied throughout industry, especially in the textile and apparel manufacturing industries, where it is widely used for the testing of fabrics and other woven material products. The test measures the rate of flame spread for vertically oriented ...
Manufactured by:Concept Equipment Limited based inRustington, UNITED KINGDOM
The BS476-6 Fire Propagation test provides information on the influence that a simple material, a composite of materials or an assembly of materials, would make to the rate of fire growth within a ...
Manufactured by:Concept Equipment Limited based inRustington, UNITED KINGDOM
The 6200 Isoperibol Calorimeter is Concept’s most precise model offered. The traditional removable bomb and bucket design along with the water jacket of this calorimeter, afford the user with complete control over the combustion process. This makes the 6200 the ultimate choice for precise research and development and quality control work required when testing to EN ISO ...
Manufactured by:Concept Equipment Limited based inRustington, UNITED KINGDOM
The Temperature Index extends the range of the Oxygen Index Module, so that the oxygen index of materials can be measured at elevated temperatures. Generally, the oxygen index falls as the gas mixture is heated, so work at elevated temperatures supplements work carried out at room temperature. This new model available from Concept Equipment utilises the very latest control technology. Selection ...
Manufactured by:Concept Equipment Limited based inRustington, UNITED KINGDOM
ISO5659-2, BS6401, ASTM E662, IMO FTPC PART 2, NES711, BSS 7239, AITM 3.0005, AITM3.0005, ABD0031. The Smoke Chamber has proved to be one of the most versatile fire testing instruments since it’s inception in the 1980’s. It is the most widely accepted apparatus for the measurement of smoke from burning materials and measures specific optical density under flaming and non-flaming ...
Manufactured by:Industrial Water and Environmental Technology (IWET) a.s. based inBrno, CZECH REPUBLIC
RWT - River Well Technology. Modular treatment plant for drinking water from surface resources. quick install and easy to use, energy effective 9 kW for 10.000 litres/hour, cost only $0.3 per 1.000 litres, water keeps its natural ...
Manufactured by:Industrial Water and Environmental Technology (IWET) a.s. based inBrno, CZECH REPUBLIC
Our speciality are portable water treatment plants - IWET CONCEPT, which are installed in 20' (6 m) shipping containers according to ISO standard. This treatment can be easily transported in a very short time and put into operation, while secure technologies against damage from ...
Manufactured by:Filter Concept Pvt. Ltd. based inAhmedabad, INDIA
Filter-Concept is keen to deliver the highest level of quality products to their customer & with endeavor to that FCPL has introduced Coalescer to cater demanding application of the gas filtration ...