- Home
- Equipment
Refine by
Cucchi Xprt Equipment & Supplies
20 equipment items found
Manufactured by:Pompe Cucchi Srl based inOpera, ITALY
The WP series gear pump has been designed to solve transfer and metering problems with non-lubricating and low viscosity liquids. The construction of this series of gear metering pumps complies with the 2006/42/CE, 2014/30/UE, 2014/35/UE directives and with the UNI EN ISO 12100, UNI EN ISO 13732-1, UNI EN 809, UNI EN ISO 14847 directives. On request, versions compliant with 2014/34/EU (ATEX) ...
Manufactured by:Pompe Cucchi Srl based inOpera, ITALY
The F – FT/FM series gear pumps are self-priming pumps suitable for transferring and pushing liquids without solid suspensions at low and medium viscosity at temperatures of up to a maximum of 230°C. The standard version is suitable for temperatures of up to 90°C. Cast iron, bronze, AISI316L versions are available. Pressures of a max of 15 bar. They can be equipped with a built-in ...
Manufactured by:Pompe Cucchi Srl based inOpera, ITALY
The WP series gear pump has been designed to solve transfer and metering problems with non-lubricating and low viscosity liquids. The construction of this series of gear metering pumps complies with the 2006/42/CE, 2014/30/UE, 2014/35/UE directives and with the UNI EN ISO 12100, UNI EN ISO 13732-1, UNI EN 809, UNI EN ISO 14847 directives. On request, versions compliant with 2014/34/EU (ATEX) ...
Manufactured by:Pompe Cucchi Srl based inOpera, ITALY
This traditional series of volumetric gear pumps obtained by earth casting is mainly used for the transfer of liquids up to 15 bar. In the case of products of medium/high viscosity, the pumps of this series can be used for metering services with the aid of frequency variators or motor variators, also electrically servo-controlled with a 4 ÷ 20 mA signal or pneumatically with a 3 ÷ ...
Manufactured by:Cucchi snc based inCastelnovo di Sotto, ITALY
The shoot tipping machine / mechanical weeding machine was designed to eliminate the grass growing underneath grapevines and to cut off vine shoots (suckers). Wires in various materials can be inserted onto the rotor, with a simple and rapid method of replacement. It offers hydraulically-operated lateral movement and mechanical protection against impact so it can work both at an angle or in ...
Manufactured by:Cucchi snc based inCastelnovo di Sotto, ITALY
These rotary hoes are particularly sturdy and suitable for finely-tilling soil and getting it ready for sowing after ploughing. The following versions are available with central or lateral version: L for small tractors with operating widths between 110 cm and 180 cm; M for operating widths between 125 cm and 220 cm; P for operating widths between 220 cm and 250 ...
Manufactured by:Pompe Cucchi Srl based inOpera, ITALY
This series of metering gear pumps was designed to allow for the production of the components of steel bar pumps. The N-series pumps were designed to satisfy all those applications where, in addition to a constant pressure, a considerable precision in metering is also required. ...
Manufactured by:Pompe Cucchi Srl based inOpera, ITALY
This series of magnetic drive metering pumps has been designed to allow the production of the components of the steel bar pump. The N series pumps have been designed to satisfy all those applications where, in addition to a constant pressure, a remarkable precision in the metering is also required. ...
Manufactured by:Pompe Cucchi Srl based inOpera, ITALY
Pompe Cucchi has created this new series of gear pumps made from steel bars in order to obtain high quality pump bodies with the total absence of cracks and/ or casting defects. The construction of this series of gear pumps complies with the 2006/42/CE, 2014/30/UE, 2014/35/UE directives and with the UNI EN ISO 12100, UNI EN ISO 13732-1, UNI EN 809, UNI, EN ISO 14847 standards. On request, ...
Manufactured by:Cucchi snc based inCastelnovo di Sotto, ITALY
The bed former AS2 Cucchi is an agricultural machine used to create trunks, or beds, in the ground. The trunks are mounds of soil approximately 30 to 70 cm high with variable width. The machine is used for the cultivation of white asparagus, which must grow in the absence of sunlight to maintain its white color. Usually towed by a tractor, it is made up of a sturdy frame, two lateral rotors ...
Manufactured by:Cucchi snc based inCastelnovo di Sotto, ITALY
The side rake for embankments and ditches solves the problem of tiring manual rake of grass in ditches, canals and embankments, but it is also suitable for normal operations in flat areas. The grass is either taken to the shore, laid out for drying, or placed in swath ready for harvesting. It is composed of a fixed supporting frame and an articulated frame with hydraulic control, to which the ...
Manufactured by:Cucchi snc based inCastelnovo di Sotto, ITALY
They are suitable for horticulture to fix quickly to the soil the plastic sheet that covers hothouses, also with small tractors. The tool burrows into the soil, so the soil is conveyed on the side: it forms the base of hothouses or tunnels fixing them. It is suitable for the creation or to clean little ditches or drains ...
Manufactured by:Cucchi snc based inCastelnovo di Sotto, ITALY
The special construction of the ASU bedformer makes it ideal for soft beds with trapezoidal profile and not excessively compact for growing strawberries, asparagus, saffron, berries and similar crops demanding the formation of a soil mound. It can work centrally or shifted to the right and left within the profile of the tractor; in particular, it can be used under glass alongside the supports. ...
Manufactured by:Cucchi snc based inCastelnovo di Sotto, ITALY
The ES inter-row rotary harrow series is suitable for tillage below rows in vineyards, orchards and other crops in rows. Its extremely sturdy construction allows it to work in heavy, stony and tenacious soils. The head of the rotary harrow breaks up clods and mixes them with plant residues or fertilisers. It has a hydraulic lateral displacement system controlled by sensor, which allows it to be ...
Manufactured by:Pompe Cucchi Srl based inOpera, ITALY
Pompe Cucchi has created this new series of gear pumps made from steel bars in order to obtain high quality pump bodies with the total absence of cracks and/ or casting defects. The construction of this series of gear pumps complies with the 2006/42/CE, 2014/30/UE, 2014/35/UE directives and with the UNI EN ISO 12100, UNI EN ISO 13732-1, UNI EN 809, UNI, EN ISO 14847 standards. On request, ...
Manufactured by:Pompe Cucchi Srl based inOpera, ITALY
The MX series is used in many sectors in the transfer of liquids with viscosities from 1 to 100,000 cPs. In the case of medium/high viscosity products, it can be used for metering services with the aid of frequency variators or motor variators, also electrically servo-controlled with a 4 ÷ 20 mA signal or pneumatically with a 3 ÷ 15 psi ...
Manufactured by:Cucchi snc based inCastelnovo di Sotto, ITALY
The inter-row rotary hoe SI 1 series is designed for tilling the soil, weed control, underneath vineyards, orchards and other crops in rows. Its extremely sturdy construction allows it to work in heavy, tough soil with high grass presence. It has a hydraulic lateral displacement system controlled by a sensor, which allows it to be used especially in young ...
Manufactured by:Cucchi snc based inCastelnovo di Sotto, ITALY
This particular series of front interceps machinery equipment is suitable for all crops that need to be tilled between the plants (vineyards, orchards). They are designed for use with front linkage tractors or rear-mounted ...
Manufactured by:Cucchi snc based inCastelnovo di Sotto, ITALY
This subsoiler consists of a resistance monolithic high strength tubular frame of 120x120mm to which are screwed on two “Michel” type curved anchors. This configuration allows to vary the distance between the two anchors from a minimum of 90 to a maximum of 160 cm adapting perfectly to the tractor wheel track and to the distance of the ...
Manufactured by:Pompe Cucchi Srl based inOpera, ITALY
The MX series is used in many sectors in the transfer of liquids with viscosities from 1 to 100,000 cPs. In the case of medium/high viscosity products, it can be used for metering services with the aid of frequency variators or motor variators, also electrically servo-controlled with a 4 ÷ 20 mA signal or pneumatically with a 3 ÷ 15 psi ...