- Home
- Equipment
Refine by
Dcm Xprt Equipment & Supplies
46 equipment items found
Manufactured by:DCM Italia s.r.l. based inBorgo Val di Taro (Parma), ITALY
Carry for rotary mower PATENTED With our carry for rotary mower you can pull rotary mowers of all Brand and model. You can prepare the machine to cut with low time. You have to attach only the carry to the tractor with the rudder and the PTO shaft. You can also pull an heavy machine with a small ...
Manufactured by:DCM Italia s.r.l. based inBorgo Val di Taro (Parma), ITALY
Front disc rotary mowers DLN-F are designed to be applied to tractors from 20 HP. The reduced weight is ideal to enable to allow to the small tractors to lift the equipment withour problems. The bigger versions are ideal to be attached to the bigger ...
Manufactured by:DCM Italia s.r.l. based inBorgo Val di Taro (Parma), ITALY
Discs rotary mower with 3 discs DLN 3D is the perfect solution to cut the forage in small areas and with small tractors from 15 ...
Manufactured by:DCM Clean Air Products based inFort Worth, TEXAS (USA)
We offer a wide range of HEPA filter vacuum cleaners specifically design to clean up hazardous dust. Applications include lead asbestos and nuclear abatement. Special high efficiency HEPA filters are certified to have a minimum efficiency of 99.97% at .3 microns. All parts have passed rigid quality control standards prior to ...
Manufactured by:DCM Clean Air Products based inFort Worth, TEXAS (USA)
We are the leader in the design and manufacturing of power hand tools designed for source capture of hazardous airborne dust at the “point of generation.” Our innovative and patented designs for source capture at point of generation are offered with our complete line of sanders, grinders, drills, routers, buffers and shrouds for custom ...
Manufactured by:DCM Clean Air Products based inFort Worth, TEXAS (USA)
Generic vacuum tools are fine for consumers, but for serious cleaning of hazardous dust and debris, you need the right tool for the job. The brush that you use to clean your clothing is not the same tool you need for removing rivet stems from inside a wing. That’s why we offer a full range of personnel cleanup tools, floor nozzles, crevice tools, dust brushes, overhead cleaning tools, and ...
Manufactured by:DCM Ultrasonic based inRafelbuñol, SPAIN
28kHz and 40kHz ultrasonic tanks with a capacity of 50 liters and 75 liters. The tanks have a built-in electric heating system of between 1500W and 2250W depending on the model and ultrasonic powers between 500W and 800W. All tanks come with a 1/2" drain. The SL series cleaning machines are designed for static charge use. They are available in capacities ranging from 100 to 12,000 liters. This ...
Manufactured by:DCM Ultrasonic based inRafelbuñol, SPAIN
Ultrasonic cleaning machines RL (rotary loads) are specially designed for cleaning parts that require continuous rotary movement for effective cleaning. Within this series, we can find multistage automatic machines for mass production with the capacity to work up to 5 baskets simultaneously and machines specifically designed for cleaning ALINOX rollers with capacity for rollers weighing up to ...
Manufactured by:DCM Ultrasonic based inRafelbuñol, SPAIN
28kHz and 40kHz ultrasonic tanks with capacity from 6 liters to 30 liters. The tanks have a built-in electric heating system of between 200W and 500W depending on the model, and ultrasonic powers between 200W and 400W. All tanks come with a 3/8" drain. The SL Series ultrasonic cleaning systems, designed for static load, are available in capacities ranging from 100 to 12,000 liters. They are ...
Manufactured by:DCM Ultrasonic based inRafelbuñol, SPAIN
28kHz and 40kHz ultrasonic tanks with a capacity of 50 liters and 75 liters. The tanks have a built-in electric heating system of between 1500W and 2250W depending on the model and ultrasonic powers between 500W and 800W. All tanks come with a 1/2" drain. The SL series ultrasonic cleaning systems, designed for static loading, are available in capacities ranging from 100 to 12,000 liters. They are ...
Manufactured by:De Ceuster Meststoffen NV (DCM) based inGrobbendonk, BELGIUM
This lawn fertiliser is specifically designed for autumn application, with a high content of long-acting potassium to ensure strong and dense turf that resists frost and treading. It effectively prevents moss growth in your lawn. This fertiliser is particularly beneficial for hardening off lawns at the end of summer or during autumn. It includes magnesium and iron (chelate) to sustain deep green ...
Manufactured by:De Ceuster Meststoffen NV (DCM) based inGrobbendonk, BELGIUM
DCM offers a clay soil improver product featuring hard, porous lava granules ranging from 0 to 3 mm. These natural origin granules are designed to aerate or drain heavy soils effectively. The product is particularly valuable for balancing the air-water ratio in dense soil structures. Suitable uses include mixing with soil to enhance air flow, using as a plant substrate for cacti and succulents, ...
Manufactured by:De Ceuster Meststoffen NV (DCM) based inGrobbendonk, BELGIUM
DCM's Granulated Fossilized Seaweed Lime, derived from coccolites, is a mild-action, fast-dissolving lime ideal for various horticultural applications. It is effectively used in vegetable gardens, ornamental gardens, orchards, and ponds. The product is composed primarily of granulated lime with a calcium carbonate (NV 50) content. The recommended dose for optimal results is 8 to 12 kg per 100 ...
Manufactured by:De Ceuster Meststoffen NV (DCM) based inGrobbendonk, BELGIUM
The DCM Decorative Bark, made from Pinus Maritima, serves as an effective natural ground cover. This terracotta-brown bark, with a sieve fraction of 20-40 mm, helps maintain soil moisture by preventing dehydration. It also shields the soil from frost and assists in weed suppression. The bark decomposes gradually, providing long-lasting coverage. Ideal for garden care, this product can be applied ...
Manufactured by:De Ceuster Meststoffen NV (DCM) based inGrobbendonk, BELGIUM
DCM Castanea Cover Chips are produced from chestnut wood, making them ideal for maintaining weed-free soil in various horticultural applications. Over time, these chips transition to an appealing teak grey color, adding both functionality and aesthetics to the garden. The hardwood nature of chestnut wood results in slow decomposition, ensuring long-lasting coverage and minimal need for ...
Manufactured by:DCM SPREADERS based inRoncà (VR), ITALY
Professional fertilizer spreader M36 is suitable for the distribution of chemical, granulated, powdery and pellets fertilizer. It is able to reach a maximum working width of 36 mt. Available with a capacity from 1500 to 4200 lt. The spreading discs, vanes, agitators, housing and opening plates are made of stainless steel in order to ensure a long-term life. Due to the corrosive products used ...
Manufactured by:DCM SPREADERS based inRoncà (VR), ITALY
Professional fertilizer spreader, SW5 (PATENTED) is a compact machine. It is suitable for the distribution of chemical, granulated, powdery and pellets fertilizer on vineyard. The hopper width (1,10 mt), ideal for vineyards and orchards, avoids damages to the plants. Capacity from 600 to 1000 lt. The spreading disc, vanes, agitators, housing and opening plates are made of stainless steel in order ...
Manufactured by:DCM SPREADERS based inRoncà (VR), ITALY
Professional fertilizer spreader S24 is suitable for the distribution of chemical, granulated, powdery and pellets fertilizer. It is able to reach a maximum working width of 24 mt. (with urea is spreadable up to 18 mt.). Available with a capacity from 1200 to 2300 lt. The spreading discs, vanes, agitators, housing and opening plates are made of stainless steel in order to ensure a long-term ...
Manufactured by:DCM SPREADERS based inRoncà (VR), ITALY
The particular form of the hopper and the slow-turning agitator (77 g/ min) allow an easy flow of compost with a specific humidity up to 38%. Model SCU/N (PATENTED) mono disc has been mainly designed for the distribution of humid fertilizers (as compost, humus, concentrated manure), but it is able to distribute also gypsum and lime besides of any other type of ...
Manufactured by:DCM Italia s.r.l. based inBorgo Val di Taro (Parma), ITALY
The r otary rakes with fix 3rd point GA 3PN enables a fine quality of work and it is the best solution to get in line the forage. Thank to the various models available, it reply to all requirements of the customer. It is available with a gearbox into an oil bath with 8, 9 or 11 arms, with or withour shock absorber, with single or twin weels and wit 3 or 4 theeth for arm. It is available for the ...