- Home
- Equipment
Refine by
Desmi Xprt Equipment & Supplies
63 equipment items found
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
The RO-SKIM is positioned at the optimum location for oil recovery. The RO-SKIM is a special section of RO-BOOM that has been fitted with a weir and DESMI DOP 250 or DOP 160 pump. The RO-SKIM is available in five sizes to mate with RO-BOOM 1000, 1300, 1500, 1800 and 2000. The weir is ideally placed for collection of the oil that is building up against the face of the RO-BOOM. One or two RO-SKIM ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
RO-KITE - The new aquatic device designed to replace the functions of a second boom sweep vessel The DESMI RO-KITE is a floating water kite based on a combination of trawl door and ramair parachute principles. When launched, the ROKITE, powered by the current and in combination with the RO-KITE’s unique design makes it swing out and away from the ship towing the outer end of the sweep ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
The DESMI TERRAPIN is a self-adjusting weir skimmer ideal for installation and deployment in tanks, industrial separators, wells and sumps where floating oil and other floating liquids need to be recovered. ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
The design of the DESMI TERMINATOR skimmer has benefited from a continuing development programme of more than 25 years. The resulting system is a very versatile, reliable, powerful and seaworthy oil skimming system that can be used in a wide variety of ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
Many oil spills over recent years have highlighted the problems of recovering very viscous oils at sea. To respond to this challenge DESMI Ro-Clean has developed a line of belt ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
The ALLIGATOR is a versatile skimmer that has the ability to recover a wide range of oils not normally associated with oleophilic skimmers - from light to very viscous oil. The brush belt pulls the oil into the unit where it is elevated and recovered at the back of the skimmer with a unique double comb ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
Close coupled self-priming centrifugal pump is a totally renewed design based on the original “K&R” models. However fully replaceable with former types, in dimensions as well as capacities. The compact pumps are simple in design, consist of few parts, and will thus reduce your costs. This of course also means easy maintenance. On basis of 50 years of experience in the production ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
PD internal gear pumps are designed for refinery and petrochemical applications, all pressure-containing components are carbon steel. Design pressure according to ANSI 300 Lbs or Pn40. PD pumps are available to meet API 676 standards with exceptions. Available with 90° angular ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
Magnetically coupled internal gear pumps for ultimate protection against leakage. As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with traditionally sealed pumps, especially where the application requires the use of double mechanical shaft seals. Often these applications are very arduous resulting in the seals and support system requiring regular ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps are specifically designed for difficult applications and those involving high viscosity liquids. HD pumps are known by their sturdy and simple construction. Available with 90° angular ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
Pump capacity: 100 to 125 m³/h / 440 to 550 US gpm. Discharge pressure: 10 bar / 145 psi max.. Dimensions: 545 x 365 x 735 mm / 21.5' x 14.5' x 29'. Minimum manhole diameter: 600 mm / 24'. Pump inlet: 250 mm / 10'. Discharge connections: 4', 5' or 6' Camlock, flange or other on request. Standard materials: Aluminium casing, high tensile plate wheel, SS Ni-Resist screw. Hydraulic requirement: ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
DESMI supports Navy activities in many ways: Special Build projects for new pumping applications, upgrades and obsolescence replacement. Replacement pumps during docking periods for both Navy and Fleet Auxiliary Ships. Attendance on board to oversee installations and to commission equipment. DESMI have a comprehensive understanding of Naval technical requirements and applications for pumps and ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
Transport and treatment of waste water are important tasks in a modern society. The waste water must be transported from residential areas and industrial companies to the waste water treatment plant, that need to optimise the way it treats wastewater with the least possible impact on people and nature. Transportation of waste water is full of challenges. Energy optimisation, design, installation ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
The DESMI fixed fire fighting system is developed to suppress or extinguish fire at an early stage before releasing the total flooding system as required by SOLAS Ch.II-2/Reg.10.5.6.1&2 for ships constructed on and after 1st July 2002. The FineFog water mist has a highly suffocating and cooling effect and with the DESMI FineFog you can therefore protect the inflammable objects in accordance ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
The DSL pumps are high efficiency pumps in a cost effective construction used in the heavy industries. Pump concept: Single-stage, double-suction, vertical, centrifugal pumps. The design of the suction side provides for a perfect flow. The inlet is placed in line with the outlet. Advanced double-suction impeller. High efficiency. Low NPSH-values. Up to 4000 m3/h, pressure up to 40 ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
The series of DESMI MODULAR S pumps represents one of the most distinctive developments in self-priming pumps. Based on many years of experience in the production of self-priming pumps we supply a pump series that meets the future demands for economical and reliable pumps. ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
The NSL range of pumps represents high efficiency, low NPSH values, easy to installation and low maintenance. The NSL series is widely used within different applications and markets. ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
The DESMI SA self-priming centrifugal pump.The diffuser principle in the self-priming DESMI SA centrifugal pump means that the priming capacity is not dependent on valves or other mechanical elements since it is the liquid flow which carries the air.The SA pump used within different applications and markets. ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
RO-MAR fenders and buoys are the result of years of develpoment and research in co-operation with major marine and offshore operators. The pneumatic RO-MAR fenders and buoys are ideal for on-board storage. The RO-MAR can be used as a temporary buoy, fender or lift/support unit. The RO-MAR pneumatic fender is especially handy for large yachts where standard boat fenders are just not up to the ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
District Cooling is a highly cost efficient and environment friendly utility service, which provides chilled water from a centralized cooling plant through a network of pipes to multiple residential, industrial and commercial buildings for air conditioning purposes. District Cooling is simple and clean. DESMI provides energy efficient pumping solutions both for water intake (e.g. seawater), ...