- Home
- Equipment
Refine by
Equirepsa Xprt Equipment & Supplies
10 equipment items found
Manufactured by:Equirepsa, S. A. based inMadrid, SPAIN
EQUIREPSA, with its own technology, has designed and manufactured several variations of ejectors for over 25 years. Our ejectors are used in a wide variety of industries in more than 80 countries. Ejectors are fluid-fluid pumps that work by transfer of momentum from the primary fluid (high pressure) to the secondary fluid aspirated (low pressure), discharging a mixture at an intermediate ...
Manufactured by:Equirepsa, S. A. based inMadrid, SPAIN
Hybrid vacuum systems are formed by combining ejectors, surface condensers and/or liquid ring vacuum pumps. They consist of a combination of steam ejectors operating in series, followed by a condenser where the vapors are condensed and thereby reduces the load of vapours to be removed by the vacuum pump which compresses non-condensable gases to atmospheric pressure. They can be designed and ...
Manufactured by:Equirepsa, S. A. based inMadrid, SPAIN
EQUIREPSA designs and manufactures condensers, not only as a part of our own vacuum systems, also for a variety of industrial applications. One type of tube and shell heat exchangers are the Surface Condensers. These are equipment that condense vapors without contact between the fluids. The heat exchange is produced through a tubes bundle without any contact between both fluids. These condensers ...
Manufactured by:Equirepsa, S. A. based inMadrid, SPAIN
These are equipment that condense vapours by direct contact producing an efficient condensation of steam and cooling of non-condensable gases. They are equipped by one or more spray nozzles, to create a large interfacial area in order to improve contact and heat transfer. This type of condenser is suitable when the mixing between the process fluid and the cooling fluid is possible. ...
Manufactured by:Equirepsa, S. A. based inMadrid, SPAIN
The modulated steam jet compressors are compressors built-in carrying a pneumatic valve, regulated by a control loop (although the regulation can also be done manually). They allow energy savings, adjusting the motive steam flow to the minimum possible, compatible with the stability of the vacuum ...
Manufactured by:Equirepsa, S. A. based inMadrid, SPAIN
These equipment are ejectors where pressurized water is used as motive fluid. The exhausters are particularly suitable when steam supply is not available and in all those cases that vapors with high amount of associated steam have to be handled, because while pumping the gases also work as a condenser. These equipment allow high compression ratios and reach low suction pressures with just a ...
Manufactured by:Equirepsa, S. A. based inMadrid, SPAIN
Liquid ring vacuum pumps are used for operating vacuum level up to 33-44 mbar a, depending on liquid ring temperature. Moreover, it is fairly cheap. They provide a high reliability because of their simplicity. This type of pumps are normally used to handle gas mixtures which contain condensable ...
Manufactured by:Equirepsa, S. A. based inMadrid, SPAIN
A vacuum system typically consists of one or more stages of ejectors with intermediate condensers which produces the condensation of the vapors coming from the previous stage. The suction pressure varies in a range from 0.100 to 200 Torr. For higher absolute pressures, a single steam ejector is enough, that is, only one stage. When vacuum systems with steam ejectors consist of several stages, ...
Manufactured by:Equirepsa, S. A. based inMadrid, SPAIN
The operation of liquid ring vacuum pumps can be carried out in three ways: Without any recirculation (see Vacuum Pumps Section), Partial recirculation, Total ...
Manufactured by:Equirepsa, S. A. based inMadrid, SPAIN
These equipment allow to heat water or a solution by direct contact with steam in the process line. Its special design ensures the mixing of both streams and the silent and instant condensation of steam, resulting in heat transfer. The steam heaters are also devices with a small pressure drop, and there is the possibility of their connection in series to achieve high temperature increases. All ...