- Home
- Equipment
Refine by
Applications
- Shredders and crushers for reject processing
- Shredders and crushers for special waste recycling sector
- Shredders and crushers for casting parts sector
- Shredders and crushers for storage media
- Shredders and crushers for Plastic barrels and containers (IBCs) sector
- Shredders and crushers for laboratory and analysis technology sector
- Shredders and crushers for size reduction of screenings sector
- Shredders and crushers for pharmaceutical industry
- Metal swarf shredding for the metal industry
- Electronic scrap shredding for the electronic waste management industry
- Shredders and crushers for refrigerator recycling sector
- Shredders and crushers for substitute fuel sampling system sector
- Cardboard shredders for cardboard recycling
- Automobile plastic shredding for the special waste recycling industry
Erdwich Xprt Equipment & Supplies
28 equipment items found
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
The specialist for coarse materials. When processing coarse materials such as electronic scrap, refrigerating devices or die-cast aluminium parts, it is important to keep the individual components as intact as possible and to process them gently, in addition to maximum process reliability and performance. This is where our RM 1350/2 and RM 1800/2 twin-shaft rippers prove what they are capable of: ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
TÜV certified. Explosion protection certificate, ATEX Directive 2014/34/EU. AwSV certificate ("German Ordinance on Plants handling substances hazardous to water”). TA Luft compliant. Integrated expansion area enables extraction from air-conditioning units with higher pressures. Also suitable for air-conditioning units with the refrigerants type 400 (R407a, R410a) and defective ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
Machine number: 2268; 2269; 2270; 2271; 2272. Cutting size: 580 x 670 mm. Drive power: 7,5 kW. Blade width: 30 mm. Number of blades: 19 pieces. Blade shape: 3-hooked. Perforation diameter: without sieve. Construction year: 2012 / 2013. Cutting unit without funnel, frame and control. ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
Economical solutions for the shredding and preparation of cardboard. The reduction of transport costs, the reduction of material for feeding to existing press containers or balers as well as the shredding of material for conveyor belt feeding are good reasons for the use of cardboard shredders. With the EKZ cardboard shredder and FKZ fine cardboard shredder, we have two robust and absolutely ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
The champions for hard and brittle materials. Hammer mills are particularly suitable for metal scrap, electrical and electronic scrap or chips made of steel, aluminum, but also other materials. And due to the easy adjustability during operation, also the balling of non-ferrous metals is no problem. The result size is variable and can be changed during operation. This product feature in particular ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
Size of cutting unit: 480 x 580 mm Drive power: 11 kW Knife width: 30 mm Number of knifes: 16 Year of manufacture: 2011 Complete with machine frame, funnel and control ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
Size of cutting unit: 250 x 230 mm Drive power: 3 kw Knife width: 8 mm Number of knifes: 29 Year of manufacture: 2002 Cutting unnit without control unit and without funnel and ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
Size of cutting unit: 600 x 400 mm Drive power: 5,5 kW Diameter of hole sieve: 15-20 mm Year of manufacture: 2011 Complete with machine frame, funnel with hydraulic press-in device and ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
Size of cutting unit: 900 x 500 mm Drive power: 22 kW Diameter of hole sieve: 25 mm diameter shape: 3 hook knifes Year of manufacture: 2009 Demonstration machine. Complete with machine frame, funnel with pneumatic press-in device and ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
Size of cutting unit: 880 x 670 mm Drive power: 9,2 kW number of revolutions: 37 rpm Diameter of hole sieve: 35 mm diameter shape: 3 hook knifes Year of manufacture: 2015 Machine complete with machine frame on platform, funnel with press-in device, control and discharge conveyor with emulsion ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
Feeding conveyor, hydraulic 2 shaft shredder H480/2-1000. Cutting unit 1000 x 800 mm complete with discharge conveyor, control unit, dust ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
Machine number: 3241. Cutting size: 600 x 400 mm. Drive power: 5,5 kW. Construction year: 2020. Cutting unit with drum, frame and ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
Solid architecture: Gastight welded housing with outboard flanged bearing. Savings on operating costs: Robust and wear-resistant. Cost effective and low maintenance: By simple installation. Double lip seal: Optionally in different material ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
Achieving precision material breakdown in just a single operation: that’s the proven capability of the Erdwich single-shaft ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
Continuous-process shredding of large quantities and volumes: that’s the world of the ERDWICH two-shaft shredder. The secret of its success is our ERDWICH rotor-blade cutting principle, honed to perfection over decades. Want to know more?. The material is taken up by the barbed blade, pulled unceremoniously into the machine and then shredded between the blades on the two opposing shafts. ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
The uniform shredding of coarse materials: that’s the speciality of the ERDWICH three-shaft shredder. ERDWICH has created the three-shaft design especially for these requirements. Entirely free of clogging and jamming – even with solid materials. Clever, huh?. Absolutely: after all, the three cutter shafts and their individual sets of blades rotate at different speeds, so as to ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
FKZ - Fine cardboard shredding for volume reduction. In addition to our proven EKZ, another machine has been developed to shred cardboard waste to a piece size. This enables pneumatic disposal directly at the material accumulation point. The FKZ fine shredder is ideally suited for processing punching remnants or individual sheets from cardboard production. By using the ERDWICH FKZ fine cardboard ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
Machine number: 1618. Cutting size: 600 x 580 mm. Drive power: 5,5 kW. Blade width: 25 mm. Number of blades: 25 pieces. Blade shape: 3-hooked. Perforation diameter: 8 mm. Construction year: 2006. Cutting unit without funnel, frame and ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
Machine number: 2930. Cutting size: 600 x 500 mm. Drive power: 9,2 kW. Blade width: 25 mm. Number of blades: 25 pieces. Blade shape: 3-hooked. Perforation diameter: variable. Construction year: 2018. Cutting with funnel, 2 hydr. press-in devices and frame; without ...
Manufactured by:Erdwich Zerkleinerungs-Systeme GmbH based inIgling, GERMANY
The champions for hard and brittle materials. Hammer mills are particularly suitable for metal scrap, electrical and electronic scrap or chips made of steel, aluminum, but also other materials. And due to the easy adjustability during operation, also the balling of non-ferrous metals is no problem. The result size is variable and can be changed during operation. This product feature in particular ...