- Home
- Equipment
Refine by
Espec Xprt Equipment & Supplies
26 equipment items found
Manufactured by:Espec MIC Corp based inOsaka, JAPAN
TPFA-1000L is middle scale multistage type indoor farm. The daily production scale is 1,000 heads of lettuce (approx. 70kg / day). Stage number can be designed from 3 to 6 stages according to request f customer. DFT (Deep Flow Technique), NFT (Nutrient Film Technique), and Airoponics are ...
Manufactured by:Espec North America, Inc. based inHudsonville, MICHIGAN (USA)
The Criterion temperature/humidity chamber series provides an economical and space-saving solution for a variety of testing requirements. The chamber's interior size is 3.5 inches wider than traditional benchtops, yet the exterior is 20% narrower. The BTL-433 model uses 115V power, meaning no special power ...
Manufactured by:Espec North America, Inc. based inHudsonville, MICHIGAN (USA)
New Express Program: Faster delivery for most typical walk-in test chamber applications. Standardized build-to-order process bypasses engineering to shorten lead-time by a ...
Manufactured by:Espec North America, Inc. based inHudsonville, MICHIGAN (USA)
Over 70 different Global-N models allow you to choose the size and performance best suited for your test applications. Temperature cycling rates from 5 to 20°C/min. are possible. Two different ultimate low temperatures are available: -35°C or -70°C. The Global-N series require the least amount of floorspace for this level of ...
Manufactured by:Espec North America, Inc. based inHudsonville, MICHIGAN (USA)
EWS chambers are solid, one-piece construction, using fiberglass insulation and an angle-iron frame. The stainless steel interior liner is reinforced and continuously welded, including leak-testing for ...
Manufactured by:Espec North America, Inc. based inHudsonville, MICHIGAN (USA)
ESPEC offers two types of standard models: the space-saving PV vertical ovens and the PH horizontal ovens. Both provide horizontal airflow for even exposure to all samples. Control constancy as low as ±0.1°C and uniformity as low as ±0.5°C ensures accurate operation. An exhaust damper is included to ventilate the oven and allow quick ...
Manufactured by:Espec North America, Inc. based inHudsonville, MICHIGAN (USA)
These models are used extensively in heat treatment/drying or burn-in of semiconductor wafers, liquid crystals, disks and other components and devices requiring clean air conditions. These units can also be prepared for installation in clean-room environments. Class 100 cleanliness is achieved by employing a HEPA filter and a back-to-front laminar circulation system. The high-performance models ...
Manufactured by:Espec North America, Inc. based inHudsonville, MICHIGAN (USA)
Are you looking for the smallest chambers possible to get your testing done? Still need all the capabilities of larger chambers, though? This is the model series for you! Available in two sizes, the smaller models are the smallest humidity chambers in the ...
Manufactured by:Espec North America, Inc. based inHudsonville, MICHIGAN (USA)
Traditional three-zone thermal shock chambers can be quite large, as three separate chambers are used. The TSA series has just one chamber, substantially reducing its size. Instead, it circulates cold, hot, or ambient air as needed. The conditioned air is pre-cooled or pre-heated beyond the setpoint, allowing quicker recovery of the desired condition after ...
Manufactured by:Espec MIC Corp based inOsaka, JAPAN
MPFF-10000TV is automatic multistage type indoor farm. The daily production scale is 10,000 heads of lettuce (approx. 700kg / day). The cultivation panel is moved by "Monorail carrier system". And we have ""Gantry crane type" carrier ...
Manufactured by:Espec MIC Corp based inOsaka, JAPAN
TAF is a container-type indoor farm, that utilizes a transportation container (40 or 20 ft) and is equipped with a plant cultivation system. This type is easy to transport, and can be established anywhere that electricity and water can be accessed. Users can grow vegetables in any location, including those in extreme climate ...
Manufactured by:Espec MIC Corp based inOsaka, JAPAN
TGE is a standard type growth chamber that is assembled insulation panels. Sunshine Ace, a HID lamp for plants, is used as the light source. This specific light source reproduces a light environment that is very similar to natural sunlight. This chamber can be prepared in a customized size depending on the installation space and ...
Manufactured by:Espec MIC Corp based inOsaka, JAPAN
TGC is a factory-made, integrated-type growth chamber. Users can use this chamber immediately upon introduction. Air flow is introduced on ground level in order to protect the plants from damage by direct wind. This chamber can be customized upon request, and the light source can be chosen from a few options (i.e. fluorescent lamp and ...
Manufactured by:Espec North America, Inc. based inHudsonville, MICHIGAN (USA)
Are you looking for the smallest chambers possible to get your testing done? Still need all the capabilities of larger chambers, though? This is the model series for you! Available in two sizes, the smaller models are the smallest humidity chambers in the ...
Manufactured by:Espec North America, Inc. based inHudsonville, MICHIGAN (USA)
The Platinous series lets you can select from a variety of sizes, ranges, and options to meet your specific environmental testing requirements. ESPEC Platinous series include features for quality and reliabile operation: Stainless steel exterior. Energy-efficient refrigeration with exclusive electronic expansion valve system. Specialized humidity generation and control. Unique thermal break ...
Manufactured by:Espec North America, Inc. based inHudsonville, MICHIGAN (USA)
The new BTZ-4200 takes advantage of compact, modern scroll compressors to bring fast temperature cycling to small form factor. The chamber can cycle temperatures at rates up to 15°C/minute without requiring cooling water or liquid ...
Manufactured by:Espec North America, Inc. based inHudsonville, MICHIGAN (USA)
For years AGREE chambers have been the workhorses of the environmental test chamber industry. Originally created to meet military test standards, their flexible design has made them suitable for a wide variety of applications. Fast temperature changes of 5 to 25°C/m. are possible, even with significant loads. The chambers have a removable floor, allowing integration with vibration test ...
Manufactured by:ESPEC Europe GmbH based inDüsseldorf, GERMANY
The Benchtop Temperature and Humidity Chambers SH/SU Series by ESPEC are designed for precise temperature and climate testing. These compact test chambers can be placed on a desk and come in two sizes, 22.5L and 64L, with a wide temperature range from -60°C to +150°C, making them suitable for various test applications. The series offers 12 models with optimal space usage through various stand ...
Manufactured by:ESPEC Europe GmbH based inDüsseldorf, GERMANY
ESPEC's Compact Constant Climate Cabinets are designed for use in laboratories and research environments. They feature a highly efficient refrigeration system combined with superb thermal insulation, making them ideal for maintaining consistent climate conditions. The integrated LCD touch panel controller supports the configuration of three constant test profiles and eight program test profiles, ...
Manufactured by:ESPEC Europe GmbH based inDüsseldorf, GERMANY
The AR Series Environmental Stress Chambers by ESPEC Europe GmbH comprise 32 diverse models engineered specifically for rigorous temperature and climate testing. These chambers facilitate rapid climate transitions and are constructed with a durable stainless exterior. A key feature is the specimen temperature control function, which ensures precise monitoring and control of specimen temperatures, ...