- Home
- Equipment
Refine by
Euro Xprt Equipment & Supplies
128 equipment items found
Manufactured by:Casotti Irroratori based inFelino (Parma), ITALY
Powder coated cast aluminium. Machined in all its parts and pre-fitted with 4 green Iglidur D flanged bushes (code ...
Manufactured by:4B Africa based inJohannesburg, SOUTH AFRICA
EURO elevator bolts have a concave head and two lugs on the underside to help prevent rotation when tightening. The Euro elevator bolts are intended for the attachment of pressed steel elevator buckets incorporating recessed bolt holes. The recessed area surrounding the bolt hole is intended to accommodate the similarly domed surface under the bolt head. Elevator Bolts made to approx. DIN ...
Manufactured by:Euromed based inCairo, EGYPT
Generic name: Hypodermic needle. Usage: Syringe for manual use delivery of required medication to body through ...
Manufactured by:Euromed based inCairo, EGYPT
Usage: Flexible tube passed through the urethra and into the bladder to drain ...
Manufactured by:Euromed based inCairo, EGYPT
Usage: Flexible tube passed through the urethra and into the bladder to drain ...
Manufactured by:Euro-Clear Kft. based inGönyu, HUNGARY
Family houses, communal as well as industrial areas, can be widely used. Thanks to its wide PH tolerance, it can be incorporated into RO and chemical ...
Manufactured by:Euro-Clear Kft. based inGönyu, HUNGARY
Water softening is perhaps one of the most common water treatment and purification methods in Hungary. This is so often needed because most of our waters are groundwater, and in the water that seeps through the rocks here, a lot of calcium and magnesium dissolves, causing water hardness. Dissolved metal salts precipitate out of the water and limescale formation begins in the pipe systems, inside ...
Manufactured by:Euro SITEX s.r.o. based inPríbram VI, CZECH REPUBLIC
Round mesh represents one of the most commonly used types of holes. This type of perforation is available in the widest range of holes, sheet dimensions and materials. Perforated sheets with round mesh are used in nearly every branch of ...
Manufactured by:Euro SITEX s.r.o. based inPríbram VI, CZECH REPUBLIC
CONIDUR perforated sheets have a special shape of openings. In contrast with common round or oval holes, the CONIDUR openings look rather triangular to semi-elliptical with an oblique, strongly conical perforation in the direction of the ...
Manufactured by:Euro SITEX s.r.o. based inPríbram VI, CZECH REPUBLIC
Our product portfolio includes a wide range of floor grid applications, from grids designed for people to walk on to grids designed for heavy cargo transportation. They are used for various platforms, footbridges, loading ramps, shelves, fencings and hole covers. The pressed grid consists of bearing bars and crosswise laid filling bars. The grids can be produced with or without borders, with ...
Manufactured by:Euro SITEX s.r.o. based inPríbram VI, CZECH REPUBLIC
The belts are made of various materials according to the purpose of their application. The most common materials are standard black steel, galvanized steel, various types of stainless steel, heat-resistant steel and acid-resistant steel. The working temperature of metal belts ranges from -200°C to +1200°C. ...
Manufactured by:Euro Tech (Far East) Ltd. based inWong Chuk Hang, HONG KONG
The SQ2010 is very easy to use via its intuitive icon driven display. For most applications a PC will not be required to configure it – making it ideal for short projects or out of the office applications. This rapid set up is achieved via its integral four button operator interface – give accurate, reliable results in minutes. It features a large graphical display, provides 0.1% ...
Manufactured by:Euro Tech (Far East) Ltd. based inWong Chuk Hang, HONG KONG
The SW Inverter/Charger is our most popular off-grid power solution. Available in 24- and 48-volt models, it provides utility-grade output power and offers high surge capacity to run most household appliances. The SW offers many programmable features including automatic generator start and stop and automatic load sensing. Its built-in, fully automatic, three-stage battery charger is designed to ...
Manufactured by:Euro Tech (Far East) Ltd. based inWong Chuk Hang, HONG KONG
The Xantrex GT250E Grid Tie Inverter is based on a reliable platform that is used in grid-connected photovoltaic and wind turbine applications in North America and Europe. Easy to install and operate, the GT250E automates startup and shutdown. It incorporates advanced Maximum Power Point Tracking (MPPT) technology to maximize the energy harvested from a PV array. To minimize power losses during ...
Manufactured by:Euro Tech (Far East) Ltd. based inWong Chuk Hang, HONG KONG
The Xantrex GT500E Grid Tie Inverter is based on a reliable platform that is used in grid-connect photovoltaic and wind turbine applications in North America and Europe. Easy to install and operate, the GT500E automates start up, and shut down. It incorporates advanced Maximum Power Point Tracking Technology to maximize the energy harvested from a PV array. To minimize power losses during the ...
Manufactured by:Euro-Jabelmann Veurink Ltd. based inItterbeck, GERMANY
The PRONAR Tandem Push-Off Trailer T 902 is a robust and efficient solution for transporting bulk materials. Designed with a maximum permissible weight of 23,000 kg and a payload capacity of 16,000 kg, this trailer is ideal for heavy-duty agricultural and industrial applications. Its loading volume of 30.8 cubic meters, coupled with a usable loading area of 16.8 square meters, provides ample ...
Manufactured by:Euro-Jabelmann Veurink Ltd. based inItterbeck, GERMANY
The UNIA Hackstriegel AKCENT 6.00 m is an advanced harrowing implement designed for diverse applications in land management and crop production. With a working width of 6 meters, this harrow facilitates efficient soil preparation and maintenance in large-scale agricultural operations. The robust hydraulic folding frame enhances portability and ease of storage, while its 240 spring tines, each 7 ...
Manufactured by:Euro-Jabelmann Veurink Ltd. based inItterbeck, GERMANY
The EURO-Jabelmann STE 4500 Subframe Container is designed for hook lift trailers and container trailers, specifically crafted to fit Pronar container vehicles like the T 185. This container boasts an interior length of 4.50 meters and weighs approximately 469 kg, making it suitable for various industrial applications. Engineered in compliance with DIN 30722-1 standards, the container is rated ...
Manufactured by:Euro-Tec based inColombier, FRANCE
Empty weight: 1 182 kg. Loaded weight: 6 103 kg. Tank Size: 3 558 litres. Equipment size en cm (H x Lx 1): 257x203x335. ...
Manufactured by:Euro-Tec based inColombier, FRANCE
Empty weight: 2 077 kg. Loaded weight: 7 394 kg. Tank Size: 4 468 litres. Equipment: size en cm (H x L x 1): 257x203x391. ...