- Home
- Equipment
Refine by
Fan Xprt Equipment & Supplies
94 equipment items found
Manufactured by:Stocks AG Limited based inWisbech, UNITED KINGDOM
The Fan Jet Duo VS-2 Control console can be used either as a lower cost manual rate adjustment, non speed proportionate control, with a an optional speed input, it will provide economic automatic speed .proportionate rate application in line with forward speed. The console has independent Left Hand and Right Hand feed control with instant start and stop of spreading, and variable disc speed with ...
Manufactured by:Stocks AG Limited based inWisbech, UNITED KINGDOM
Standard control provides variable disc and feed motor speed, with instant start and stop of spreading, and on-the-move manual rate ...
Manufactured by:Chuan Fan Electric Co., Ltd. based inTaoYung City, TAIWAN
DC series, a new design high efficiency dust collector, both cyclone & suction design were ...
Manufactured by:Chuan Fan Electric Co., Ltd. based inTaoYung City, TAIWAN
DC series, a new design high efficiency dust collector, both cyclone & suction design were ...
Manufactured by:FAN Separator GmbH based inMarktschorgast, GERMANY
Flanged auger. Filter elements R (perforation 6mm). Filter elements E (perforation 5mm). Housing parts made of stainless steel 1.4301. Water collecting pan, standard model. Bevel geared motor 22kW 400V-50Hz. Hydraulic aggregate 2,2kW 400V-50Hz for the press cylinder. Hydraulic hoses L=7m . Control panel ...
Manufactured by:FAN Separator GmbH based inMarktschorgast, GERMANY
Submersible motor mixer with 400V/50Hz submersible motor, 1450 min-1 Two-wing thrust propeller - stainless steel Mounting bracket with grade adjustment - in stainless steel Planetary gears, mechanical seal in oil bath, safe from running dry Thermal winding protection (PTC / PTC resistor) Temperature class H, media temperature 65°C Sealing sensor for planetary gear 12 m cable 12x2,5 in ...
Manufactured by:FAN Separator GmbH based inMarktschorgast, GERMANY
Inlet housing and screen housing of cast iron. Press flange with output regulator of stainless steel with 4 weights. Base plate made of stainless steel for installation on the floor. 4" outlet. Screen reinforced 520, Optional screen width. Auger 200/800/1100, 5-10, TD, 2SFK (F10412180). Oscillator, connection size 4". Gear motor U IEC 4kW ...
Manufactured by:FAN Separator GmbH based inMarktschorgast, GERMANY
Inlet housing and screen housing of cast iron. Press flange with output regulator made of stainless steel, with 4 weights. Base plate of stainless steel, four an installation on the floor . Two 4" outlets. Screens reinforced 520 and HD 260, optional screen width . Auger for PSS 1.2-780: 200/1060/1300, 5-10, TD, 2SFK (F10412210). Oscillator, connecting size 4". Gear motor: U IEC PSS 1.2-780: ...
Manufactured by:FAN Separator GmbH based inMarktschorgast, GERMANY
Flanged auger. Filter elements R (perforation 6mm). Filter elements E (perforation 5mm). Housing parts made of stainless steel 1.4301. Water collecting pan, standard model . E-Motor 37kW 400V-50Hz. Helical gear box. Hydraulic aggregate 2,2kW 400V-50Hz for press cylinder. Hydraulic hoses L=7m. Electricity and water to cool the machine must be provided by the ...
Manufactured by:FAN Separator GmbH based inMarktschorgast, GERMANY
Inlet housing and screen housing of cast iron. Press flange with output regulator made of stainless steel with 2 weights. Base plate made of stainless steel; for mounting on the floor. 5" outlet. Screen reinforced 520 and HD 260, screen width 1mm. Auger core diameter 180mm for PSS 3.3- 780: 220/1060/1300, 10-10, TD, LFK (F10422214). Oscillator connection 4". Gear motor U IEC bei PSS 3.3-780: ...
Manufactured by:FAN Separator GmbH based inMarktschorgast, GERMANY
Inlet housing and screen housing made of stainless steel 1.4571. Press flange with output regulator made of stainless steel, with 4 weights . Base plate made of stainless steel for an installation on the floor . 5" Outlet . Screen basket HD 520 V4A. Optional screen width . Auger 200/800/1100, 10-10, TD, 2LFK (F10442189 ). Oscillator connection 4". Gear motor U IEC 5,5kW (F10632657 ...
Manufactured by:FAN Separator GmbH based inMarktschorgast, GERMANY
Inlet housing and screen housing made of stainless steel 1.4571. Press flange with output regulator made of stainless steel, with 4 weights. Base plate made of stainless steel for an installation on the floor. 5" outlet. Screen baskets reinforced 520 V4A and HD 260 V4A;. Optional screen width . Auger for PSS 5-780: 200/1060/1300, 10-10, TD, 2LFK (F10432789). Oscillator connection 4". Gear motor ...
Manufactured by:FAN Separator GmbH based inMarktschorgast, GERMANY
1 x ISO 20’ container, completely isolated for applications with low ambient temperatures (up to ...
Manufactured by:Romla Fans based inSan Diego, CALIFORNIA (USA)
Romlair Model H Hooded Propeller Roof Fans are intended for the general ventilation of factories and warehouses. These fans can also be placed to provide spot ventilation in specific problem ...
Manufactured by:Romla Fans based inSan Diego, CALIFORNIA (USA)
Romla FANs offers the Model TB Tube Axial Fans, designed for efficient ventilation in industrial and commercial applications. These fans come with robust construction, capable of handling variable airflow requirements and high static pressures. Suitable for continuous operation, the Model TB fans are engineered to maintain optimal performance under demanding conditions. The fans feature ...
Manufactured by:ACDC FAN based inGuangzhou, CHINA
The GW80B model is an 80x80x38mm cooling fan designed for various industrial applications. The fan housing is constructed from die-cast aluminum, available in either black or white coating, which ensures durability and corrosion resistance. Its impeller, made of metal, is engineered for optimal airflow and stability. The fan operates within a temperature range of -30 to 60 degrees Celsius and ...
Manufactured by:ACDC FAN based inGuangzhou, CHINA
The GD2510 Series of cooling fans by ACDC measures 25x25x10mm and is offered with die-cast aluminum housing in either black or white coating. These fans feature metal impellers and are designed to operate in a temperature range of -30 to 60 degrees Celsius. They are available in operational voltage ranges of 110V (±10%) or 220V (±10%) with a maximum dielectric strength of 5mA at ...
Manufactured by:ACDC FAN based inGuangzhou, CHINA
The GRD5015 Series is a high-performance cooling fan measuring 50x50x15mm, suitable for various industrial applications. The fan housing is made of die-cast aluminum available in black or white coating, with the impeller constructed from thermoplastic PBT UL 94V-0. It operates within a temperature range of -30 to 60℃, supporting an operation voltage range of 110V (±10%) and 220V ...
Manufactured by:ACDC FAN based inGuangzhou, CHINA
The GE6025 Series is a high-performance cooling fan designed for robust industrial applications. With dimensions of 60x60x25mm, the fan housing is constructed from die-cast aluminum with black or white coating options, ensuring durability and efficient thermal management. The impeller is made from high-strength thermoplastic PBT rated at UL 94V-0, providing reliable operation under varying ...
Manufactured by:Cincinnati Fan and Ventilator Company, Inc. based inMason, OHIO (USA)
Cincinnati Fan manufactures eight sizes of cast aluminum pressure blowers. Multiple wheels and inlet sizes are offered to provide extensive direct drive performance ratings. Belt driven arrangements are available for even more ...