- Home
- Equipment
Refine by
Fox Xprt Equipment & Supplies
65 equipment items found
Manufactured by:Midac Corporation based inWestfield, MASSACHUSETTS (USA)
In this configuration, the FOx provides rapid, accurate, and automated analysis of synthetic and petroleumbased oils and lubricants using ASTM-approved methods. Quantitative and trend analysis for soot, water, oxidation, nitration, sulfation, glycol, additives, and fuel contamination are possible with single button action. For laboratories with a heavy sample workload, the FOx is designed for ...
Manufactured by:Midac Corporation based inWestfield, MASSACHUSETTS (USA)
The F6000 lets you make ASTM approved measurements of commercial and military gasoline, diesel, jet fuels, and kerosene with more speed and accuracy than ever before. This versatile instrument complies with two important fuel analysis methodologies: ASTM D-5845 for Oxygenates and Benzene, ASTM D-6277 for Benzene and Gasoline In addition to these measurements, the FOx is ideal for a variety of ...
Manufactured by:Fox Equipment, LLC based inGreen Cove Springs, FLORIDA (USA)
Radial Vane /VIV /IVC Dampers provide additional flow control for fan inlets. Radial Vanes also provide pre-spin of the air into the fan. Starting the fan while the damper is in the closed position allows for a low horsepower startup. Fox Equipment supplies all radial vane dampers with a cantilevered blade design complete with two external bearings thus eliminating the need for blade support and ...
Manufactured by:Fox Thermal based inMarina, CALIFORNIA (USA)
The Fox Thermal Model FT4X, is the newest Thermal Gas Mass Flow Meter offered from Fox Thermal. Its BLM accuracy compliant Data Logger has a 7-year ...
Manufactured by:FALC srl based in Faenza, ITALY
Tube mm 80x80x6 (inches 3,15x3,15x0,236) for attaching eradicator tines, to remove the compact soil left by tractor’s wheels. Folding side deflectors to reduce the maximum external width to m 2,99 for m 3, to m 2,49 for m 2,50. Rear clod bar adjustable in height in order to obtain a finer and well leveled sowing bed (see 3 photo 3). Rear P.T.O. (see 4 photo 3). Hydraulic up and over ...
Manufactured by:Fox Equipment, LLC based inGreen Cove Springs, FLORIDA (USA)
Double louver dampers are designed to achieve zero leakage isolation. Double louvers achieve zero leakage isolation by pressurizing the space between the two sets of louver blades with “seal air”. This “seal air” is supplied at a pressure higher than the pressure in the flue duct, creating a positive pressure ...
Manufactured by:Fox Equipment, LLC based inGreen Cove Springs, FLORIDA (USA)
Parallel louver dampers are primarily used for isolation applications. All of the blades rotate in the same direction. With the addition of blade seals, this damper can achieve better than 99% shut off. Parallel blade louvers are also used on inlet boxes of large industrial fans to promote pre-spin to the in rushing air, thus enhancing fan ...
Manufactured by:Fox Equipment, LLC based inGreen Cove Springs, FLORIDA (USA)
Slide Gate or “Guillotine” Damper are most commonly specified when positive isolation for maintenance is the primary function of the damper and also for severe service conditions. Guillotines are classified in two styles: Low Leak and Zero Leak. Both styles are ideal for a high degree of isolation while providing low pressure drop when the dampers are in the open position. Guillotine ...
Manufactured by:Fox Fittings sp. z o.o. sp. k based inWilamowice, POLAND
Material: PE 100-RC. Application: water and gas. 10 bar water, 5 bar gas. MRS - 10 MPa. Installation: electrofusion and spigot ...
Manufactured by:Fox Environmental Systems Pty Ltd based inWarana, AUSTRALIA
When your site has the potential to have stormwater run-off that has been contaminated with water soluble products such as wines, milk or chemicals entering the waterways there is a need for a Fox model CMS600 Constant Monitoring System. The Fox CMS600 system will monitor all site run-off for pollutant concentrations that exceed predetermined levels. If set levels are exceeded the system will ...
Manufactured by:Fox Fittings sp. z o.o. sp. k based inWilamowice, POLAND
Material: PE 100-RC. Application: water and gas. 25 bar water, 10 bar gas. MRS - 10 MPa. Removable centre ...
Manufactured by:Fox Fittings sp. z o.o. sp. k based inWilamowice, POLAND
Material: PE 100-RC. Application: water and gas. 16 bar water, 10 bar gas. MRS - 10 MPa. Fixed product (ready to use). Installation: bilateral heating zone. Centre ...
Manufactured by:Gresham Gas Sampling based inCamberley, UNITED KINGDOM
Commercially available spherical bearings typically offer around 7 degrees of rotational freedom in 2 axes, which is sometimes insufficient for certain types of test. Designed to fit in place of a standard spherical eye end FOX-VPS have devised a spherical ball end joint, complete with backlash adjustment, which provides up to 20 degrees of rotational freedom. Manufactured from high strength ...
Manufactured by:Fox Fittings sp. z o.o. sp. k based inWilamowice, POLAND
Material: PE 100-RC. Application: water and gas. 16 bar water, 10 bar gas. MRS - 10 MPa. The knob made of PP. Rotate 90 from closed to fully open. Valves can operate in partially opened position. BVR - reduced bore. ...
Manufactured by:Fox Fittings sp. z o.o. sp. k based inWilamowice, POLAND
Material: PE 100-RC. Application: water and gas. 16 bar water, 10 bar gas. MRS - 10 MPa. The knob made of PP. Rotate 90 from closed to fully open. Valves can operate in partially opened position. BVS - full bore. ...
Manufactured by:FOX Industries based inFairfield, NEW JERSEY (USA)
Fox Zirconium Silicate Beads are engineered to enhance precision in grinding applications, particularly in ball mills and media mills across various industries. These beads are manufactured to set a benchmark for performance and reliability, excelling in applications that demand durability and minimal wear. With a robust chemical composition, they facilitate superior particle size reduction and ...
Manufactured by:FOX Industries based inFairfield, NEW JERSEY (USA)
Glass beads for polishing and finishing applications offer a versatile, efficient, and environmentally friendly solution for achieving smooth and glossy surfaces on a wide range of materials. Their spherical shape and consistent size distribution ensure uniform results and precise edge rounding, enhancing part aesthetics and functionality. Glass beads are non-abrasive and gentle on delicate ...
Manufactured by:FOX Industries based inFairfield, NEW JERSEY (USA)
FOX Ceria Stabilized Zirconia Beads are engineered to offer precision and durability in grinding processes, particularly in ball mills and media mills. Built from high-strength Tetragonal Zirconia Polycrystal (TZP), these beads provide unmatched stability and exceptional wear resistance, ensuring consistent and reliable performance under extreme conditions. Their superior density and chemical ...
Manufactured by:Fox S.r.l. based inOpera (MI), ITALY
Fox S.r.l. provides calibration pots designed for installation on the suction side of dosing pumps, enabling precise flow rate calibration. The calibration pots are engineered for measurement intervals of either 30 or 60 seconds and are built to withstand a maximum working pressure of 1 bar. Constructed with stainless steel AISI316L for closing caps, PTFE gaskets, and borosilicate glass tubes ...
Manufactured by:Fox S.r.l. based inOpera (MI), ITALY
Fox S.r.l. offers the Series KZ2 electromechanical differential pressure switches, designed for precision pressure control in technical applications. With a working temperature range from -25°C to +85°C, these switches are capable of a switching frequency of 60 cycles per minute. The setting point is adjustable; the differential pressure ratio can be increased by sliding the connector ...