- Home
- Equipment
Refine by
Fluitec Xprt Equipment & Supplies
10 equipment items found
Manufactured by:Fluitec - Mixing + Reaction Solutions AG based inNeftenbach, SWITZERLAND
The design, manufacture and installation of flue gas mixers – including complete ammonia dosing stations for SCR DeNOx processes (catalytic elimination of NOx) – are among Fluitec's outstanding strengths. The equilibration of concentration and temperature profiles over the cross-sectional area of the duct channels must be achieved with the smallest possible pressure ...
Manufactured by:Fluitec - Mixing + Reaction Solutions AG based inNeftenbach, SWITZERLAND
The use of static mixers in the laminar flow regime makes great demands on the additive dosing technique. The fluid must be guaranteed to exit in a controlled way without pulsation, taking account of the specific properties of the mixer, and clogging must be reliably ...
Manufactured by:Fluitec - Mixing + Reaction Solutions AG based inNeftenbach, SWITZERLAND
The design of the mixer / heat exchanger equates to a combination of a static mixer and a multitube heat exchanger in which a highly viscous product on the shell side flows through the static mixer. The advantages of these two distinct systems are aggregated for use at laminar ...
Manufactured by:Fluitec - Mixing + Reaction Solutions AG based inNeftenbach, SWITZERLAND
Owing to the modular design of the Fluitec Contiplant system, it is now an easy matter to test the conversion from batch to continuous reaction processes and assess the economic impact. In many cases, significant business potential can be identified based on the higher concentrations, better temperature control or other process intensification measures. This potential can then be leveraged ...
Manufactured by:Fluitec - Mixing + Reaction Solutions AG based inNeftenbach, SWITZERLAND
Insoluble media can be easily dispersed or contacted with the help of static mixers. Static mixers are ideal for washing, reaction and mass transfer processes. They can be designed and built for both laminar and turbulent flows such that the droplet size, mass transfer surfaces and extraction and emulsion processes can be fine-tuned to the requirements of the ...
Manufactured by:Fluitec - Mixing + Reaction Solutions AG based inNeftenbach, SWITZERLAND
Multitube heat exchangers with mixing elements in the multitubes are ideal for product viscosities between 50 and approximately 500 mPas. Various static mixing elements can be installed in the multitubes depending on the heat transfer application. These elements increase the heat transfer from the product to the tube wall, so that smaller sizes can be realised than if the multitube heat exchanger ...
Manufactured by:Fluitec - Mixing + Reaction Solutions AG based inNeftenbach, SWITZERLAND
Fluitec sterile equipment is specially constructed for the greatest possible separation between the primary and secondary media, with practically total dranage on the product side. Fluitec sterile shell and tube heat exchangers are therefore ideally suited to CIP/SIP plants. A special surface treatment technique, plus seamless pipes with electropolished interiors, results in surface roughness ...
Manufactured by:Fluitec - Mixing + Reaction Solutions AG based inNeftenbach, SWITZERLAND
Dosing technology for static mixers entails controlled, simultaneous and pulsation-free metering of the additive and main streams into a static mixer. As static mixers are generally designed with only minimal back-mixing, the components have to be dosed constantly over time. Fluitec dosing stations were specially developed for problematic ...
Manufactured by:Fluitec - Mixing + Reaction Solutions AG based inNeftenbach, SWITZERLAND
Laminar mixing processes are based on the repeated separation of the flow into layers, followed by redistribution and recombination parallel to the flow direction. The number of layers, and hence the homogeneity, increases with each additional mixing element. The design and length of the mixer vary according to the mixing task. The challenge confronting manufacturers is to offer an efficient, ...
Manufactured by:Fluitec - Mixing + Reaction Solutions AG based inNeftenbach, SWITZERLAND
Static mixers can significantly reduce the time required for mixing processes if the flow in the tube is turbulent. Special mixing elements are used here to form the vortex. Mixing and homogenisation take place in the downstream mixer tube. Two mixer designs have proved particularly successful in the last few years: the Aquamix slide-in mixer for installation in existing tubes and the Vortix ...