- Home
- Equipment
Refine by
Franke Xprt Equipment & Supplies
31 equipment items found
Manufactured by:Franke-Filter GmbH based inBad Salzdetfurth, GERMANY
Oil Mist Eliminators for steam turbines are designed to avoid the leackage of oil mists. By suctioning and filtering moisture and contamination particles from your lube oil system, Oil Mist Eliminators ensure a smooth operation of your turbine. Plus, the filtered oil is eventually re-added to your lube oil cycle. The advantage of our Oil Mist Eliminators for you? Not only are you protecting ...
Manufactured by:Franke-Filter GmbH based inBad Salzdetfurth, GERMANY
For hydro turbines, it is crucial that the vacuum can be individually adjusted at each bearing (turbine, guide bearing, generator) so that the oil mist can be extracted ...
Manufactured by:Franke-Filter GmbH based inBad Salzdetfurth, GERMANY
New and improved MFK-032-39.4 and MFK-674-39.4 filter elements for Oil Mist Separators are now available. Due to their new structure they are even more reliable and stable even when they are almost ...
Manufactured by:Framo AS based inFlorvåg, NORWAY
Framo pumping systems ensure safe switching between cargoes, with no risk of cargo contamination, so your vessel can carry anything from acids to drinking ...
Manufactured by:Franke-Filter GmbH based inBad Salzdetfurth, GERMANY
Oil Mist Eliminators for gas and diesel engines maintain a constant vacuum in the crankshaft housing. Due to fluctuations in the crankshaft housing, your Oil Mist Eliminator is equipped with a frequency converter. The pressure transducer records pressure and transmits it to the side channel vacuum pump. By alteration of the rotation speed of the side channel vacuum pump the vacuum and suction ...
Manufactured by:Franke-Filter GmbH based inBad Salzdetfurth, GERMANY
FRANKE-Filter offers you a wide range of original spare parts for your Oil Mist Eliminator. From MFK filter cartridges and o-rings to side channel vacuum pumps - get in touch now to secure your personal offer. ...
Manufactured by:FRANK GMBH based inMörfelden-Walldorf, GERMANY
Gate valves are used to regulate and close off flow volumes. They are often used in water industry, especially water ...
Manufactured by:FRANK GMBH based inMörfelden-Walldorf, GERMANY
We also supply welding rods that match our plates and solid rods, as well as the necessary welding equipment – tailored to your application. ...
Manufactured by:FRANK GMBH based inMörfelden-Walldorf, GERMANY
We manufacture rigid pipe bends with tight tolerances made of PE 100 pipes. These pipe have been tried-and-tested in gas and drinking water supply and meet the high demands of the DVGW (German Association for Gas and Water Applications) for the transport of gas and drinking water. ...
Manufactured by:FRANK GMBH based inMörfelden-Walldorf, GERMANY
Butterfly valves are characterized by their short overall length. FRANK plastic butterfly valves are robust valves for extremely sophisticated applications. They are corrosion resistant and easy to handle thanks to the top flange dimensions being in line with DIN EN ISO 5211 for automation and thanks to their relatively low weight. Our butterfly valves are available with a lever which can be ...
Manufactured by:Fortress Interlocks Ltd. based inWolverhampton, UNITED KINGDOM
The FRANK Industrial Access Control Solution: Prevents unauthorised access and unauthorised line shut down. Simple installation and integration to a network, using your existing ID cards. Easy management of access ...
Manufactured by:FRANK GMBH based inMörfelden-Walldorf, GERMANY
Geothermal probes of FRANK will be delivered completely assembled. We weld the foot of the probe with special develped welding equipment and inspected personal. As a third party, a governmental institute for material testing [Saatliche Materialpruefanstalt Darmstadt] controls the production of probes acc. to the corresponding SKZ-guideline HR 3.26. Our probes meet all the current norms. The ...
Manufactured by:Franke-Filter GmbH based inBad Salzdetfurth, GERMANY
The lube oil cycle of a gas turbine is a sensitive structure that needs intensive protection from environmental influences. FRANKE-Filter has designed Oil Mist Separators for gas turbines that provide protection by extracting moisture and dirt particles from the lube oil cycle and filtering them. Eventually, the filtered oil mist is re-added to the ...
Manufactured by:Franke-Filter GmbH based inBad Salzdetfurth, GERMANY
Oil mist and overpressure in the lubricating oil system belong to the past. Your solution for the future? The ecological Oil Mist Separators from ...
Manufactured by:Franke-Filter GmbH based inBad Salzdetfurth, GERMANY
Emulsion Mist Separators are of great importance in metalworking to protect the employees, the hall and also the cooling lubricant itself. At FRANKE-Filter you will not only find Oil Mist Separators for rotary equipment, we also manufacture highly efficient Emulsion Mist Separators. These are used for CNC processing machines as well as for turning, drilling, milling and ...
Manufactured by:FRANK GMBH based inMörfelden-Walldorf, GERMANY
The free circular passage in the "OPEN" position ensures little pressure loss. The ball enables the flow to be shut off quickly. Our ball valves stand out because they can be connected in so many different ways. The top flange dimensions in line with DIN EN ISO 5211 allow straightforward automation. We recommend the FRANK ball valve with relief well for gas emitting ...
Manufactured by:FRANK GMBH based inMörfelden-Walldorf, GERMANY
PKS pipes are manufactured of PE and PP acc. to DIN 16961 and draft DIN EN 13476. That way the most important demand to sewer pipes, manholes and storm water tanks, even a durable tight system can be ...
Manufactured by:FRANK GMBH based inMörfelden-Walldorf, GERMANY
With blanks up to DN 1600 and wall thicknesses up to 400 mm, we offer the right solution for even the most demanding applications: with reductions, fixed flanges and flange rings in XXL format, for ...
Manufactured by:FRANK GMBH based inMörfelden-Walldorf, GERMANY
We provide both plates and spiral pipes for the production of tanks and apparatuses. Pipe lengths of up to 6 m. Wall thicknesses from 5 to 100 mm. Greater thicknesses are available after technical ...
Manufactured by:FRANK GMBH based inMörfelden-Walldorf, GERMANY
Spiral pipes made of PE and PP have proven themselves for many years in tank and apparatus construction, as well as ventilation technology. FRANK provides high quality spiral pipes that ensure maximum safety for both installers and end ...