- Home
- Equipment
Refine by
Applications
- Data loggers solutions for built environment applications
- Data loggers solutions for canterbury cathedral conservation industry
- Data loggers solutions for GenII systems for conservation and scientific research sector
- Data loggers solutions for site-based energy performance monitoring sector
- Data loggers solutions for research laboratory telemetry monitoring and alarm system
Genii Xprt Equipment & Supplies
39 equipment items found
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
SRV450 is a new receiver logger from Eltek designed for use with the extensive range of GenII transmitters. It is intended for users who require realtime data, multiple site access and advanced analytical software. Communications from the SRV450 to the remote server is via mobile data providing a truly single box ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
The GS41AV transmitter is designed for use with the E plus E series of air velocity sensors, types EE660 or EE576. Highly accurate readings can be achieved down to 0m/s. The combination has proved ideal where air laminar flow in ducted heating / ventilation systems in domestic or industrial installations needs to be ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
General purpose bipolar range transmitters that are designed to be used with the HukseFlux HFP01 heat flux plate. The GS42H has two inputs and the GS44H has four inputs; all inputs have the same range. This range is hardware configured at the time of manufacture. The transmitter will have a suffix letter corresponding to the range - see the specification section for more ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
The GD43E transmitter is designed for users who wish to monitor temperature, temperature/humidity and an input from an external sensor e.g. CO2, O2 etc. When used with one of the Vaisala probes listed below, for example, the transmitter provides a compact, comprehensive and cost effective monitoring solution for incubators. The Vaisala CO2 sensors require an 24VDC external power supply in order ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
The RX250AL Receiver logger is the heart of a GenII logging system. Because the RX250AL is responsible for receiving and storing the data, it is not necessary to have a PC permanently connected. The built-in battery means data logging is not interrupted even if there is a temporary AC mains failure. Multiple RX250ALs can be used for wide area coverage. Alarms (including SMS alarms) come as ...
Manufactured by:Trio Ostomy Care, Trademark of Trio Healthcare Ltd based inPrinceton, NEW JERSEY (USA)
Genii Convex Ostomy Seals are an innovative product designed to address common issues faced by ostomates, such as uneven skin surfaces, dips, or gaps around the stoma that often lead to leaks. Constructed using Sil2 Breathable Silicone Technology, these seals play a crucial role in maintaining healthy skin by allowing it to breathe while also protecting it from irritants. They are specially ...
Manufactured by:Animal Care Systems, Inc. based inCentennial, COLORADO (USA)
The Optirat GenII IVC rack system features an exceptionally small footprint and the highest density housing, the highest in the industry. Animals are fully protected in our cages, and odors and allergens are ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
The RC250 is a high performance telemetry receiver designed for use with the standard GenII range of telemetry transmitters, repeaters and accessories. It outputs ModBus RTU or serial data to a connected PC for integration into industry standard PC Software. Such software could include LabVIEW, DASYlab, Wonderware or proprietary software compliant to CFR21 Part ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
The GenII people counter system consists of the self powered GC62 transmitter to which the pulse output from a Velleman PEM7D can be connected. The PEM7D is a compact AC mains powered device that emits a continuous infrared beam. The sender and receiver are contained in a single compact enclosure that produces a pulse if the reflected beam is interrupted. The GC62 has two counter inputs. ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
The GS41Acf is a conformally coated GS41A transmitter. It provides one physical pyranometer input and two calculated ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
Built-in digital RH and temperature sensor. 'C' indicates standard case without display. 'D' indicates display. 'W' indicates white finish. ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
The OD04 is an IP65 rated polycarbonate enclosure with self powered GD04 transmitter and thermistor temperature probe. The enclosure is provided with 4 fixing holes that are obscured when the cover is ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
The OD14E is equipped with transmitter type GD14Ecf to provide an RH/temperature probe and additionally 2 thermistor temperature ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
The GenII Logmitter is a series of devices from Eltek that can be configured as a GenII transmitter or standalone datalogger. Configured as a logger and deployed alone, it is ideal for smaller spaces and short term or temporary events in sites such as galleries or laboratories. For large buildings, e.g. city block museums, storage areas or research laboratories, it can be deployed as a ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
GC60: 2 state inputs, e.g. door open/close. GC60Z: 2 state inputs, e.g. door open/close, with additional functionality designed for a system monitoring changes of events in real time. ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
Thermistors are ideal for ambient temperatures as they combine fast response time and accuracy. Range extremes are -50°C to + 150°C. Long cable lengths can be used. Type U: 2000 ohms at 25°C (accuracy +/-0.1°C over the range 0 to ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
There are many areas where the effects of light have to be monitored and logged, typical applications include measurement of light falling on museum exhibits. Both visible light and UV light components need to be identified and measured. The LS50 ("light puck") and LS70 modules utilise the museum and conservation industry preferred Elsec - Littlemore light / light and UV sensors. The Eltek GD72E ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
Indoor, AC mains or battery operated air quality transmitter with built-in CO2 0-5000ppm NDIR technology, RH and temperature ...
Manufactured by:Eltek Limited based inHaslingfield, UNITED KINGDOM
The GC60F transmitter and flood detecting cable system is designed for users who wish to detect presence of flooding in sensitive areas. The system continuously monitors a dry or wet environment and data at the receiving device can be used to raise local or text message alarms. The GC60F flood sensing system can be used together with any other GenII transmitter to form a comprehensive ...
Manufactured by:Trio Ostomy Care, Trademark of Trio Healthcare Ltd based inPrinceton, NEW JERSEY (USA)
Genii™ Flat Ostomy Seals, developed by Trio Healthcare Ltd, employ advanced Sil2™ Breathable Silicone Technology™ to offer an alternative to conventional hydrocolloid seals. These ostomy seals are crafted to support the skin's natural barrier by allowing it to breathe and heal, mitigating irritation around the stoma area. The seals are designed for ease of application, ...