- Home
- Equipment
Refine by
Herose Xprt Equipment & Supplies
12 equipment items found
Manufactured by:HEROSE based inBad Oldesloe, GERMANY
Safety Valves, brass, type tested TÜV-SV.1090 D/G. Standard safety valve with FPM valve seal, open bonnet, with discharge holes, with lifting device Inlet: male thread type G (BSPP) acc. to ISO ...
Manufactured by:HEROSE based inBad Oldesloe, GERMANY
Bronze body and topwork with maintenance-free gland packing (O-Ring) and non rising stem flanged connection acc. to DIN EN 1092-3 PN10 or PN16. ...
Manufactured by:HEROSE based inBad Oldesloe, GERMANY
Cryogenic-Globe Valves with Pneumatic Actuator, (DN100=PN40, DN150 = PN25)Stainless steel body and topworkActuator - air opens, spring closes or contrary'live loaded' gland packing' cleaned and degreased for oxygen service ' - the actuator is not cleaned andDegreased for ...
Manufactured by:HEROSE based inBad Oldesloe, GERMANY
Control valves, pn16, din 3844Control characteristic: linear,bronze body, screwed topwork in brass, with opening indicator, part no. 04020.x.0000, female thread connection (g) acc. To iso 7-1 rp. ...
Manufactured by:HEROSE based inBad Oldesloe, GERMANY
The Type 01322 is a cryogenic right angle valve designed for low-temperature applications, specifically suitable for air gases, vapors, and cryogenic liquefied gases, including LNG. Constructed with a stainless steel body and a bronze upper part, it features a 'live loaded' spindle seal and is oil and grease-free for oxygen service. Various specifications are offered, which comply with ISO 1127 ...
Manufactured by:HEROSE based inBad Oldesloe, GERMANY
Pneumatic Actuators for Control Valves; Actuator - spring to open, air to close maximum air pressure for operation 6.0 bar g Actuator coating outside - Epoxy resin. Available options - on request only: Pneumatic actuator with override handwheel Ambient temperature limit: 20°C / -4°F (253K) up to +80°C / 176°F ...
Manufactured by:HEROSE based inBad Oldesloe, GERMANY
Stainless steel body and topwork, one way tightening (in flow direction), 'live loaded' gland packing 'cleaned and degreased for oxygen service' ...
Manufactured by:HEROSE based inBad Oldesloe, GERMANY
Bronze body, screwed topwork in brass, Outlet with cap and chain, Part No. 03199.0150.0060, Inlet: round flange drilled acc. to DIN PN 6, Part No. 03199.0320.0060, Inlet: square flange drilled acc. to DIN PN ...
Manufactured by:HEROSE based inBad Oldesloe, GERMANY
This cryogenic top-entry shut-off valve from HEROSE is engineered with a stainless steel housing suitable for applications demanding extreme low temperatures, down to -269°C (4K). It is primarily designed for the isolation of process streams in the cryogenic temperatures encountered in the industrial handling of hydrogen, air gases, steam, and liquefied natural gases (LNG). The valve features ...
Manufactured by:HEROSE based inBad Oldesloe, GERMANY
The Type 09340 cryogenic shut-off valve is a specialized valve designed for use in low-temperature applications, suitable for air gases, vapors, and cryogenic liquefied gases, including LNG. It features a stainless steel body with a bolted bonnet, ensuring tight sealing in the flow direction. The valve operates at pressures ranging from 5 to 50 bar with leakage rate A according to DIN EN 12266, ...
Manufactured by:HEROSE based inBad Oldesloe, GERMANY
The Type 07003 Cryogenic Filling Module is designed for use with liquid and gaseous media, including LNG, and it operates effectively in a temperature range from -196°C (77K) to +120°C (393K). The module's housing and flanged upper part are constructed from bronze, ensuring durability and resistance in cryogenic applications. Featuring a check valve function at the filling connection and ...
Manufactured by:HEROSE based inBad Oldesloe, GERMANY
The HEROSE Type 15C01 is a cryogenic ball valve designed for use in low temperature applications involving air gases, vapors, and cryogenic liquefied gases, including LNG. This valve features a unidirectional flow design with a relief bore and is available with weld sockets or threaded ends suitable for stainless steel pipes as per ISO 1127 or ASTM A312 standards. It operates within a temperature ...