- Home
- Equipment
Refine by
Haefely Xprt Equipment & Supplies
11 equipment items found
Distributed by:Advanced Test Equipment Rentals based inSan Diego, CALIFORNIA (USA)
The new Haefely AXOS 8 Expandable EMC Immunity Test System integrates all of the best features of several stand alone test systems into one single economic solution. It can be individually combined either with 7 kV Surge Combination Wave, 7 kV Ring Wave, 7 kV Telecom Wave*, 5 kV EFT/Burst or Dips & Interrupts, along with an integrated singlephase coupling / decoupling network. This allows ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
The PCD 150 is used for surge coupling onto unshielded data- and signal lines according to IEC/EN standards. Damped oscillatory waves with both 100kHz and 1MHz up to 3.3kV peak as well as ring wave 100kHz with Z=200 Ohm up to 4.4kV peak can be coupled. Coupling and decoupling elements are included in one box because of the sensitive impulse shape. Manual coupling path switching for differential ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
The FP-EFT 32M is a manual three phase coupling/decoupling network (CDN) used for thee phase emu testing applications. The CDN can be used with most of the existing Haefely EFT/Burst generators.The unit complies to the latest edition of IEC 61000-4-4 standard. Maximum EUT voltage of 690VAC Phase - Phase, 400VAC Phase - Neutral, 110VDC, 32 A per phase EUT ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
The new AXOS 5 - Compact integrates all of the best features of our stand alone test systems into one single economic solution. It is capable of 5kV EFT/Burst, 5kV Combination Wave (1.2/50us & 8/20us), AC/DC Dips & Interrupts(*) and Pulsed Magnetic Field(**). The unit also includes an integrated single-phase coupling decoupling network (CDN) for EMC testing applications up to 16A.The ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
The PEFT 8010 is the state-of-the-art EFT/Burst Immunity Test System with a built-in coupling/decoupling network for single phase or three-phase mains supply lines and a HV terminal to connect a capacitive coupling clamp IP4B. The spike frequency can be varied from as low as 1Hz to 110kHz. The PEFT 8010 is capable to generate 999 spikes per millisecond or up to 250 spikes per burst. Its ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
The KAL 9510 has been designed to fulfill the standard requirements of a PD calibrator. Its wide range (from 1 pace to 50 no), its small injection capacitor, carefully selected features and intuitive user interface makes the KAL 9510 ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
The 4761 high precision standard current comparators is used as comparison standard in the differential method (bridge) measurement of current instrument transformers together with the measuring instruments type 2763 and 2767. The special active flux compensated design of these comparators results in negligible current errors.These units can also be used as current measuring range extension for C ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
The DEC 6 is used for decoupling auxiliary equipment from an EUT tested with 10/700us impulses up to 6.6kV peak. It is used to decouple unshielded symmetrical data and signal lines according standard ITU K.44. Up to 4 wires can be tested simultaneously. To obtain maximum flexibility only decoupling and protection elements are included in the DEC 6. Coupling circuits, which depends on the EUT to ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
The DEC 5 is used for decoupling auxiliary equipment from an EUT tested with either 1,2/50us - 8/20us combination wave impulses or 10/700us impulses up to 6.6kV peak. It is used to decouple unshielded symmetrical data and signal lines according standards IEC 61000-4-5 Edition 1 and 2 and ITU K.44. Up to 4 wires can be tested simultaneously. To obtain maximum flexibility only decoupling and ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
The FP-EFT 100M2 is a manual three phase coupling / decoupling network (CDN) used for thee phase emu testing applications. The CDN can be used with existing Haefely burst generator.The unit complies to the latest edition of IEC 61000-4-4 standard. Maximum EUT voltage of 690VAC Phase - Phase, 400VAC Phase - Neutral, 110VDC, 100 A per phase EUT ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
Cable test termination systems are used for high voltage testing of power cables. Before high voltage (AC or Impulse) can be applied the power cable need to be prepared and terminated in a special way order to control the electrical field distribution along the ...