- Home
- Equipment
Refine by
Harsonic Xprt Equipment & Supplies
8 equipment items found
Manufactured by:HARSONIC bvba based in, BELGIUM
A clean hull is extremely important! Everybody who has a boat knows the problem : fouling or the growth of all kinds of organisms. Fouling is an annoying problem which reduces speed, increases fuel consumption and causes corrosion damage. The current solutions are often not effective and require costly annual maintenance. Moreover, they harm the environment and your own health since they contain ...
Manufactured by:HARSONIC bvba based in, BELGIUM
Finally an investment that earns you money. Significant savings on maintenance costs, chemical products & ...
Manufactured by:HARSONIC bvba based in, BELGIUM
HARSONIC avoids growth of biofilm-producing bacteria and fungi and biocorrosion in hydraulic- and lubrication oil systems in offshore installations and ships. By means of Harsonic there is a much greener and efficient solution than ionization or cathodic ...
Manufactured by:HARSONIC bvba based in, BELGIUM
A clean hull is extremely important! Fouling is an annoying problem which reduces speed, increases fuel consumption and causes corrosion ...
Manufactured by:HARSONIC bvba based in, BELGIUM
Pollutants in water. Water that is circulated even in tap water, often contains salts (such as chlorine, sulphates and carbonates), dissolved gases (such as oxygen and carbon dioxide) and metal ions (such as iron and manganese ions). The presence of these pollutants can cause a series of problems. The main problems that are caused are fouling, limestone formation, corrosion and biological ...
Manufactured by:HARSONIC bvba based in, BELGIUM
On a seagoing vessel there is in general a lot of cooling required. This is done traditionally, by using seawater, bringing into the vessel through the sea chest, and then use this seawater for cooling. In principle , a boxcooler is a pipe bundle, as known from tubular heat exchangers, which is put direct in the seawater, whereas the seawater can be used direct for the cooling of the different ...
Manufactured by:HARSONIC bvba based in, BELGIUM
A propeller is exposed to all sorts of attacks underwater, such as rusting and adhesions of the sea. It is the key piece of the ship’s propulsion system, and thus deserves special attention. A propeller in poor state is a disaster. To continue to use a very dirty propeller is like driving your car on a road that’s in very poor state and full of potholes. We know that very dirty ...
Manufactured by:HARSONIC bvba based in, BELGIUM
The fuel on commercial ships is continuously re-circulated and exposed to extreme pressure and heat, which results in the agglomeration of asphaltenes. It leads to the formation of larger and larger clusters and solids, which are very difficult to completely combust. These solids may grow so large that they will not pass through the filter element. They become part of the polymer and sludge build ...