- Home
- Equipment
Refine by
Hydrotech Xprt Equipment & Supplies
79 equipment items found
Manufactured by:IBG HydroTech GmbH based inAlzenau, GERMANY
The Pilz is designed for general cleaning of house connections and small pipe diameters with low to medium debris accumulations of limescale, soap and ...
Manufactured by:IBG HydroTech GmbH based inAlzenau, GERMANY
The Dracula is a universal cleaning nozzle with a large jet angle that allows easy cleaning through tight bends. In combination with the High Efficiency Nozzle-Series (designated ‘HW’), use of a mechanical cleaning tool can usually be ...
Manufactured by:Hydrotech a.s based inVinosady, SLOVAKIA
The development of industrial production has caused not only the increase in the concentration of pollutants in wastewater but also the need for water saving and operating costs which are related to the large consumption of ...
Manufactured by:Hydrotech a.s based inVinosady, SLOVAKIA
In phosphorus processes removal we use phosphorus precipitation to magnesium ammonium phosphate (MgNH4PO4.6H2O). In the main process of phosphorus removal, partial nitrogen and organic pollution is also reduced. The produced precipitate (STRUVIT) can be used as a valuable fertilizer. Our process is particularly useful in cases of high concentrations of phosphorus where classical processes are ...
Manufactured by:Hydrotech a.s based inVinosady, SLOVAKIA
In our offer you will find a lot of additional wastewater treatment and water treatment equipment that we will design, deliver and install if you are ...
Manufactured by:IBG HydroTech GmbH based inAlzenau, GERMANY
The newly designed Vibration Nozzles RDS-V, RotorRüttler and RüMax (for use with recycled water) form the foundation of a new concept for the easy removal of mineral deposits, concrete, building materials and slag and similar materials in pipe and sewer ...
Manufactured by:Hydrotech a.s based inVinosady, SLOVAKIA
We provide our clients with mechanical and biological waste water treatment plants within a wide range of capacities that can be fully adapted to their requirements. Depending on the size and location of the WWTP, we offer sewage treatment in concrete, steel and plastic tanks as well as compact (container) WWTPs. The advantages of our WWTPs are, above all, minimal space requirements, ...
Manufactured by:Hydrotech ZS Consulting based inRound Rock, TEXAS (USA)
Compact MS: Is only 17” long and 1.75" in diameter, which makes it very portable. Supports SDI-12 communication protocol. It will easily connect to a datalogger like Sutron®, Handar®, Waterlog®, or any datalogger that uses SDI-12. Supports RS232 communication protocol. It will easily connect to a PC or ...
Manufactured by:Hydrotech ZS Consulting based inRound Rock, TEXAS (USA)
Compact DS: Is only 21.5” long and 2.6" in diameter, which makes it very portable. Supports SDI-12 communication protocol. It will easily connect to a datalogger like Sutron®, Handar®, Waterlog®, or any datalogger that uses SDI-12. Supports RS232 communication protocol. It will easily connect to a PC or PDA. Internal Battery Pack. 8 AA batteries for unattended deployments when ...
Manufactured by:US HydroTech Environmental Solutions based inRohnert Park, CALIFORNIA (USA)
These recycle systems are designed to remove free hydrocarbons and filter water to be sent back through a pressure washer. They come standard with pH and ORP injection and are designed for corrosion-resistance by utilizing polymer tanks and recycled plastic ...
Manufactured by:HydroTech Inc. based inSarasota, FLORIDA (USA)
Media filtration is used to reduce the level of suspended solids (turbidity) in incoming feed water. Suspended solids consist of small particles such as silt, clay, grit, organic matter, algae and other microorganisms. Incoming feed water that is high in suspended solids can cause significant pressure drop and reduce the effectiveness of downstream filtration equipment such as reverse osmosis. A ...
Manufactured by:HydroTech Inc. based inSarasota, FLORIDA (USA)
HydroTech offers chemical dosing equipment as options to our water treatment systems or as stand-alone units. Our dosing systems are designed and configured based on end-user needs and can vary in flow rate from 12 GPH to 30 GPM. Dosing pumps are available in either 110~/60Hz or 220~/50Hz. When sold as a part of a complete water treatment system, the dosing pumps are controlled by the main ...
Manufactured by:HydroTech Inc. based inSarasota, FLORIDA (USA)
HydroTech offers pre-treatment systems and components as preliminary filtration stage for our membrane systems or for stand-alone customer-specified applications. Depending on the raw water condition, our team of engineers can recommend a configuration of filtration media, active carbon and/ or softening to provide the right combination of value and features for the end ...
Manufactured by:HydroTech Engineering, LLC based inSandy, UTAH (USA)
HTE Engineering and its partners have provided hundreds of Francis turbines all over the world, ranging in size from 145 kW to 750 MW. The Francis turbine is a type of inward-flowing reaction turbine. This turbine is named after James B. Francis (1815 – 1892), an American hydraulic engineer who designed, built, and tested the first of these types of ...
Manufactured by:HydroTech Inc. based inSarasota, FLORIDA (USA)
HydroTech's media filtration and softeners provide the right combination of value and features required for any membrane pretreatment application. All our models are sized for HydroTech systems, or can be designed for a specific project.Multimedia and Carbon filters are available in single tank configuration. Water Softeners are available in single tank or twin alternating formats. Our Pre and ...
Manufactured by:HydroTech Engineering, LLC based inSandy, UTAH (USA)
With over 50 years in the industry, HTE Engineering and its partners have provided Kaplan turbines ranging in size from 200 kW to 400 ...
Manufactured by:HydroTech Engineering, LLC based inSandy, UTAH (USA)
HTE Engineering and its partners have had the opportunity to provide Pelton turbines all over the world, with sizes ranging from 260 kW to 500 ...
Manufactured by:HydroTech Engineering, LLC based inSandy, UTAH (USA)
The cross-flow turbine is a type of impulse turbine. The design of this particular turbine was initially developed by Anthony Michell, an Austrian Engineer, in the early 1900’s. The idea was further developed by Donát Bánki, a Hungarian engineer, and even later it was improved upon again by Fritz Ossberger, a German ...
Manufactured by:HydroTech Engineering, LLC based inSandy, UTAH (USA)
Micro hydro and mini hydro projects are generally distinguished by their generating capacity. By definition, mini hydro units have a rated capacity of less than 1,000 kW. Micro hydro units have a rated capacity of less than 100 kW. Most turbine types can be designed to adapt to micro and mini hydro ...
Manufactured by:Hydrotech a.s based inVinosady, SLOVAKIA
The by-product of anaerobic treatment is a high-energy biogas which can be combusted in its own boiler room or possibly fed to the central boiler in the ...