- Home
- Equipment
Refine by
Hypro Xprt Equipment & Supplies
56 equipment items found
Manufactured by:Hypro EU Limited based inCaldecote, UNITED KINGDOM
The 6500 series, 6 roller, pump achieves up to 21.8 gpm (82.5 lpm) and 300 psi (20.7 bar). Herbicide Users: Cast Iron pumps lasted to 140 hours before failure, Ni-Resist pumps lasted to 332 hours before failure, and Silver Series XL pumps ran over 1000 hours and still met new pump specs! ...
Manufactured by:Hypro EU Limited based inCaldecote, UNITED KINGDOM
Smart, robust ISOBUS compatible electric valve nozzle body solutions for the most efficient spraying. The system provides defined application of chemicals, eliminating spraying in areas that do not require treatment while providing individual nozzle control from the cab. Enhance your sprayer with a complete precision agriculture solution for individual nozzle control on existing or new ...
Manufactured by:Hypro EU Limited based inCaldecote, UNITED KINGDOM
Hypro ProFlo nozzle bodies are designed to deliver the highest flow rates across the spraying pressure range. These turret bodies have a mounting tab for easy installation on a dry boom. Choose from a 3-way or 5-way turret, allowing you to select spray performance with a twist of the ...
Manufactured by:Hypro EU Limited based inCaldecote, UNITED KINGDOM
The Hypro 9307C series hydraulically-driven, cast iron centrifugal pump achieves a max of 370 gpm (1400 lpm) and a max of 135 psi (9.3 bar). The Hypro “close-coupled” design reduces the mounting space required, eliminating long shafts and couplers between the pump and ...
Manufactured by:Moore Watson Ltd based inFalkirk, UNITED KINGDOM
Separation and product sizing for diamond, gold, nickel or iron ore, coal, slag, quarry aggregates, sea defence, rip-rap, demolition, waste material, recycling and other minerals. RS212 Tri axle Heavy Duty Mobile Trommel Screen operating at an open cut diamond mine in South Africa, powered by Cat 3116TA Engine Hydraulic Drive reciprocating feeder & 1400TPH Trommel Screen. 200 Ton capacity ...
Manufactured by:Moore Watson Ltd based inFalkirk, UNITED KINGDOM
The Hypro-Feed ® Reciprocating Feeder is an ideal solution for primary and secondary feed applications. Its compact rigid design is robust and suitable for impact loading, direct dump with dump trucks and wheeled loaders and for handling large heavy lump or fine, wet and sticky material, the reciprocating feeder is designed and installed to push material at a regulated rate from a feed ...
Manufactured by:Hypro AB based inLönsboda, SWEDEN
HYPRO 755 VB is a free-standing, trailer-mounted HYPRO 755 – with no crane, winch, pump or tank. It has been produced for use on a forest trailer as the carrying unit for the processor, with lower ground pressure and lower purchase price as a result. HYPRO 755 VB is a robust tractor processor with a working radius of fully 280°, in other words, processing from both sides of the trailer. ...
Manufactured by:Hypro AB based inLönsboda, SWEDEN
HYPRO 765 is a delimbing and debarking tractor processor with crane. It is mounted on the three-point-linkage of a tractor. The crane has a total reach of 7 meters and both the crane and the processor have a remarkable working radius of 280°, which allows felling on both sides. The lateral movement provide generous adjustment to suit the direction of the fallen tree and allow distances of up ...
Manufactured by:Hypro EU Limited based inCaldecote, UNITED KINGDOM
Eliminates the smallest droplets to produce a medium to coarse spray reducing drift without compromising coverage. Proven to be amongst the best performing nozzle in Syngenta agronomic trials. Suitable for PWM ...
Manufactured by:Hypro Pumps - Pentair based inGolden Valley, MINNESOTA (USA)
The Hypro 9303C & 9303S Series hydraulic motor driven, cast iron and stainless steel centrifugal pump achieves a max of 147gpm and 145psi. Available in cast iron and 316 stainless steel for extended pump life. Hydraulic motor drive (for open center, closed center and load-sensing systems). 220 x 200 Universal Flange available (U). Max. fluid temperature: 140°F/60°C. Impeller: Cast ...
Manufactured by:Hypro Pumps - Pentair based inGolden Valley, MINNESOTA (USA)
The Hypro 1542P high-powered, self-priming transfer pumps deliver industry leading performance. Proven Hypro PowerPro and Honda® engines. Connection Ports available in 2" x 2" NPT or 2" Universal Flange. Elastomers: EPDM standard, Viton optional. Poly impeller with stainless steel insert (3”); Nylon impeller (2”). Suction Lift: 25 ft./7.62 m. Available with or without ...
Manufactured by:Hypro Pumps - Pentair based inGolden Valley, MINNESOTA (USA)
PowerPro 6.5 horsepower gas engines are available with recoil or electric start. Electric start option available for quick start-up. Dual-element air filter provides highest degree of filtering. Cast iron cylinder sleeve for commercial use. Overhead valve for cleaner operation. Equipped with a robust low-oil sensor to prevent engine damage. CARB/EPA certified engines. ...
Manufactured by:Hypro Pumps - Pentair based inGolden Valley, MINNESOTA (USA)
The 7560 series, 8 roller, pump achieves up to 22.5 gpm (85.2 lpm) and 300 psi (20.7 bar). HERBICIDE USERS: Cast Iron pumps lasted to 140 hours before failure, Ni-Resist pumps lasted to 332 hours before failure, and Silver Series XL pumps ran over 1000 hours and still met new pump specs! Herbicide users get up to 10 times longer pump life with Silver Series! 15/16" solid stainless steel shaft ...
Manufactured by:Hypro Pumps - Pentair based inGolden Valley, MINNESOTA (USA)
The SF-1100-REC Chemical Transfer Recirculation System is a 12-Volt DC, self-priming, positive-displacement diaphragm pump. This system is particularly useful when pumping fluids with suspended particles and can be mounted to any tank with a 9-inch, threaded opening. ...
Manufactured by:Hypro Pumps - Pentair based inGolden Valley, MINNESOTA (USA)
Pentair Hypro GuardianAIR Twin spray nozzles are the best choice for high-coverage applications where on-target spray delivery is important. They are ideal for low crops with complex canopies, such as vegetables, where thorough coverage of the target and protection of the surroundings are of high importance. High-coverage forward and rear-facing fans provide coverage on both sides of target. ...
Manufactured by:Hypro AB based inLönsboda, SWEDEN
Automatic cross-cutting system is available as an optional extra with HYPRO 450 XL. Lever for feeding and crosscut saw is then replaced by an EHC joystick where feeding is controlled by the joystick’s forward/backward movement and the crosscut saw is controlled via push button. With the automatic cross-cutting system activated, the operator holds the lever in drawn position so that the ...
Manufactured by:Hypro AB based inLönsboda, SWEDEN
HYPRO MD430-D has length and diameter measurement, it saves log data for print out via USB and will suggest length to cut depending on the diameter of the trunk and the assortment list that the operator has set. Computer program and cables to connect the measuring computer and print out log data to a PC are included. If required, selection of tree species takes place by means of a simple press on ...
Manufactured by:Hypro AB based inLönsboda, SWEDEN
HYPRO’s processors are equipped with professional digital radio equipment. It meets the high speed/response speed requirements, with no delay and reliable radio control of the winch for maximum safety. It is specially designed with a dead man's switch, on/off function via transmitter and a highly impact-resistant case. Radio communication is automatically turned off if inactive for more ...
Manufactured by:Hypro AB based inLönsboda, SWEDEN
The HYPRO MD430 measuring computer has an LCD colour monitor with large white numbers that are easy to read even in strong sunlight and a wide viewing angle. Starting and resetting measuring is always performed automatically via photocells – the user does not need to make a cut to initiate measuring. The computer is mounted in a heavy-duty metal casing and its design means that it can be ...
Manufactured by:Hypro Engineers Pvt. Ltd. based inPune, INDIA
We have already started collecting CO2 and recycling it back to the process of Hops Extraction. Hypro successfully supplied a CO2 Recovery Plant of 700 kg/hr capacity to YCH through ICC Group, United States. The technology – conceptualization by Hypro MD Mr. Ravi Varma makes the whole CO2 System one of a kind. Hypro Engineers indigenously worked on the design, development, and ...