- Home
- Equipment
Refine by
Im Xprt Equipment & Supplies
51 equipment items found
Manufactured by:Integrity Municipal Systems (IMS) based inPowa, CALIFORNIA (USA)
The IMS Hydrofluosilicic Acid Feed System provides safe storage and accurate dosing of Hydrofluosilicic Acid, in a fully contained, pre-assembled skid. The packaged system is pre-wired and piped with local instrumentation and controls. ...
Manufactured by:Integrity Municipal Systems (IMS) based inPowa, CALIFORNIA (USA)
The RJD-150 emergency chlorine scrubber is the next generation in emergency chlorine scrubber technology. It uses a new high capacity, non-hazardous dry adsorbent media to absorb up to 150 lbs (70 kg) of chlorine vapor, at leak rates up to 78 lbs/min as required by the Uniform Fire Code. The RJD-150 system is designed to maintain negative pressure in the chlorination and chlorine storage rooms, ...
Manufactured by:Integrity Municipal Systems (IMS) based inPowa, CALIFORNIA (USA)
The RJD-2000 emergency chlorine scrubber is the next generation in emergency chlorine scrubber technology. It uses a new high capacity, non-hazardous dry adsorbent media to absorb up to 1-Ton of chlorine vapor, at leak rates up to 78 lbs/min as required by the Uniform Fire Code. The RJD-2000 system is designed to maintain negative pressure in the chlorination and chlorine storage rooms, while ...
Manufactured by:Integrity Municipal Systems (IMS) based inPowa, CALIFORNIA (USA)
The Series 31-165 microprocessor controlled weighbelt feeder controls the feed rate of dry chemicals with an accuracy as low as 0.25% of set rate. Its accuracy and instantaneous response to feed rate changes and variations in material density provide tight control of chemical usages and minimize waste. The controller can provide information about chemical application rate for record keeping or ...
Manufactured by:Integrity Municipal Systems (IMS) based inPowa, CALIFORNIA (USA)
Lime is one of the most common and economical chemicals used in the water and wastewater treatment process. The cost of commercial bulk hydrated lime or prepared lime slurry solutions, however, becomes prohibitive for installations requiring a continuous, high volume supply, typically greater than 45 kgs/hr (100 lbs/hr). To help alleviate this cost, on-site slaking or hydration is the ideal ...
Manufactured by:Integrity Municipal Systems (IMS) based inPowa, CALIFORNIA (USA)
The IMS BCS carbon adsorber is a once-through activated carbon odor removal system designed to treat hydrogen sulfide (H2S) and organic odors (VOCs) found in municipal wastewater collection systems and treatment processes. Systems can be designed for airflow capacities up to 6,800 CFM (11600 trf/h) in a single bed and up to 20,000 cfm (34000 m3/h) in a dual bed system. Systems are designed (or ...
Manufactured by:Industrial & Marine Silencers based inShepshed, UNITED KINGDOM
Our industrial silencers are of absorptive type, suitable for vertical and horizontal installations. The design gives good attenuation in the higher frequency octave band widths and is, therefore, versatile in its application as an intake or exhaust silencer on fan blowers, centrifugal compressors, internal combustion engines, and small low-pressure gas vents and steam ...
Manufactured by:Industrial & Marine Silencers based inShepshed, UNITED KINGDOM
The term vent silencer was derived simply for silencers used to attenuate noise produced by the expansion of Gas, Steam or Air at elevated temperatures to atmospheric pressure. Vent silencers serve a two fold ...
Manufactured by:Industrial & Marine Silencers based inShepshed, UNITED KINGDOM
The structure is manufactured to the same high specification as the weather canopy with the addition of: Acoustic 50mm resin bonded mineral fibre faced with 1.0mm galvanised perforated steel applied to the doors and roof. This ensures that the structure meets the noise regulations laid down by the European community. ...
Manufactured by:Industrial & Marine Silencers based inShepshed, UNITED KINGDOM
It has long been understood that excessive noise can affect employee’ health and hearing and so damage their well-being and productivity. As the effects have been increasingly recognised and understood, the demand for efficient protection has risen. Choose from three levels –30dB, 38dB and 45dB – to provide a high degree of noise control. ...
Manufactured by:HAMMER-IMS nv based inHerk-de-Stad, BELGIUM
The family of CURTAIN measurement systems consists of different machine types: CURTAIN O-frame - Robust system for wide production lines, CURTAIN C-frame - Offering arm length up to 1.5 ...
Manufactured by:HAMMER-IMS nv based inHerk-de-Stad, BELGIUM
The AEROBILITY sensor, better known as the Aerobility Air Permeability Sensor, perfectly fits the requirements of air permeability measurements for various materials among which metal filters, non-woven filters, with a specific focus on air filtration. The sensor applies a 200 Pa under-pressure and calculates the air permeability based on measuring the air flow through the either the Venturi ...
Manufactured by:IME-DC Group based inHof, GERMANY
The IME-DC blood lancets for capillary blood collection using a lancing device with a lancet holder inner diameter: 5.8 mm – 6.3 ...
Manufactured by:IME-DC Group based inHof, GERMANY
The IME-DC blood glucose monitoring system is an in vitro diagnostic tool that is suitable for self-testing. It enables people with diabetes and specialist medical staff to determine blood glucose ...
Manufactured by:IME-DC Group based inHof, GERMANY
The cleanFINE penta Pen Needles are used in combination with an insulin pen for subcutaneous insulin ...
Manufactured by:IM Environmental Equipment Germany GmbH based inHeilbronn, GERMANY
The MVR-300™ detector is specifically designed to provide continuous monitoring for refrigerants associated with high-efficiency, high volume refrigerant cooling and heating systems, such as VRF/VRV (Variable Refrigerant Flow/Variable Refrigerant Volume) sytems. Typical applications include hotels, dormitories, hospitals, office buildings, and apartment buildings. ...
Manufactured by:IM Environmental Equipment Germany GmbH based inHeilbronn, GERMANY
Bacharach’s MGS-408 Gas Detection Controller centralizes the status of up to 8 gas detection channels in a single location. The digital display provides a real-time view of the gas concentration and status at each gas detection point. It also allows for the controller to be configured in minutes via the intuitive menu ...
Manufactured by:Waters Corporation based inMilford, MASSACHUSETTS (USA)
Beyond Resolution Does high resolution, accurate mass data always lead to the correct answer first time? Avoid additional confirmatory experiments by utilizing the selectivity of ion mobility. Featuring new geometry and including XS Ion Optics and the QuanTof2 detection system, the Vion IMS QTof has the sensitivity and dynamic range to make ion mobility quantitative and routinely usable, ...
Manufactured by:Imequadri Duestelle S.p.A based inUrgnano (BG), ITALY
Up to 1000 V – 5000 A - 100 kA; The Polimeta distribution switchboards are foreseen for centralized distribution systems of low voltage electric power. ...
Manufactured by:Imequadri Duestelle S.p.A based inUrgnano (BG), ITALY
Up to 1000 V –3200 A- 75 kA; Multicontrol motor control center switchboards are made of standardized modular fix or withdrawable units, each of them including operating control and protection devices. The multicontrol range can be equipped with microprocessor systems, enabled to carry out protection, control and connection functions, thus performing some kind of advanced” Motor ...