- Home
- Equipment
Refine by
Iris Xprt Equipment & Supplies
63 equipment items found
Manufactured by:IRIS Instruments based inOrleans, FRANCE
This Electrode resistance tester has been designed to control the continuity of wires / electrodes.The connection of the circuit to be tested is done thanks to the two plugs. One button is used to read the value of the measurement, the result will be displayed in Kohm In case of open circuit, no values will be displayed. The module is supplied by two standards ...
Distributed by:Canadian Life Science based inPeterborough, ONTARIO (CANADA)
Polymeric based SPE product line manufactured in many configurations with a wide range of particle sizes and various surface chemistry for ion-exchange, hydrophilic and hydrophobic ...
Manufactured by:IRIS Instruments based inOrleans, FRANCE
The role of the batteries is essential for all electrical prospecting surveys with a resistivity-meter and particularly in multi-electrode mode as it is sometimes necessary to inject huge amounts of current during several hours, by using continually external batteries. That is the reason it is important to control regularly the state of the batteries and to be sure to go on the field with good ...
Manufactured by:Life Spine, Inc. based inHuntley, ILLINOIS (USA)
The IRIS Anterior Cervical Plate System provides a comprehensive set of instruments and implants to accommodate the needs and preferences of surgeons. The system incorporates a low profile plate with a zero-step integrated nitinol locking mechanism, large graft windows and optimal screw angulation. The IRIS ACP system provides tactile and visual confirmation of final screw placement while ...
Manufactured by:Iris-Mec Srl based inPoviglio (RE), ITALY
Tilting and elevator lift with fixed platform to cart for a full and safe dismantling of End life Vehicles. The Revolving RBT Rig, allows full and safe dismantling of heavy and valuable mechanical parts from vehicles. It avoids the hazardous situation of working underneath the vehicle, and allowing the operator to work in an upright and comfortable position. Provided with automatic hydraulic ...
Manufactured by:Immucor based inNorcross, GEORGIA (US) (USA)
NEO Iris is Immucor’s most productive, fully-automated blood bank instrument. Improve your day-to-day efficiencies with the highest type and screen throughput in the ...
Manufactured by:Zeulab S.L. based inDuplicado, SPAIN
Add 1 drop of milk to the test and IRIS will automatically run the beta-lactam detection test in a few minutes. Results will be sent to your mobile phone, server or the cloud where they will be available in ...
Manufactured by:IRIS Instruments based inOrleans, FRANCE
Specifically designed for very shallow, high resolution resistivity sounding and profiling, the Kid is the most compact of the Syscal range whilst retaining the well-known reliability and measurement accuracy of its counter ...
Manufactured by:IRIS SPREADERS, CO. based inIksan-si, SOUTH KOREA
3-Point hitch for tractor. Automatic reel control that easily winds up hoses and automatically arranges them to avoid tangling ...
Manufactured by:Iris Power LP based inMississauga, ONTARIO (CANADA)
Iris Power Capacitive Couplers are designed to detect Partial Discharge activity in motors, generators, switchgear and isolated phase bus for applications where low frequency 1nF couplers are ...
Manufactured by:Iris Power LP based inMississauga, ONTARIO (CANADA)
The Total Flux Probe (TFProbe) is used for detection of shorted rotor windings in generators and synchronous motors where the air gap is less than 50mm by measuring air gap ...
Manufactured by:Iris Power LP based inMississauga, ONTARIO (CANADA)
Iris Power Epoxy Mica Capacitors (EMC) are designed to detect Partial Discharge activity in motors, generators, switchgear and isolated phase bus while not imposing on the machine’s operation or reliability in any way. Iris Power’s 80 pF EMCs are designed to block the 50/60 Hz power frequency and allow only high frequency (>40MHz) signals to pass through, be collected and analyzed ...
Manufactured by:Iris Power LP based inMississauga, ONTARIO (CANADA)
Iris Power Stator Slot Couplers (SSCs) are by far the most sensitive partial discharge sensor in the world since they are installed directly underneath the wedges in high voltage stator slots. The data collected using Stator Slot Couplers are not affected by normal external interference (or noise) such as power system corona, output bus arcing or other ...
Manufactured by:IRIS SPREADERS, CO. based inIksan-si, SOUTH KOREA
Rapid cultivation + crop quality improvement + assembly work (labor reduction) + fertilizer savings of about 50%li lessthen Seed sowing of various seeds such as beans, grains, radishes, and sorghum. Model type: 3 types. ISM-1850X-22 : tillage width 1850mm / 2 ridges - 2 sowing. ISM-2100X-22 : tillage width 2100mm / 2 ridges - 2 sowing. ISM-2400X-24 : tillage width 2400mm / 2 ridges - 4 ...
Manufactured by:Porvair Sciences Limited based inWrexham, UNITED KINGDOM
Excellent recoveries thanks to the highly retentive nature of polymeric phases. An absence of residual silanol groups associated with silica media. A high surface area that results in higher analyte capacity compared to silica-based SPE. Benefiting from the absence of leachates and extractables, from the plastic and the media. Inert to a wide array of solvents and works across a wide pH range. ...
Manufactured by:Emile Egger & Cie SA based inCressier NE, SWITZERLAND
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain ...
Manufactured by:Iris-Mec Srl based inPoviglio (RE), ITALY
Pneumatic drainage system complete with container, CTN and ISK-NEW. Drainage system includes 4 pneumatic diaphragm pumps, including BRL arm for oil collection and PFT-MONO with 1 diaphragm pump and air ...
Manufactured by:rothopro GmbH based inGörwihl, GERMANY
Innovative design combines plastic with metallic look. Fingerprint - ...
Manufactured by:rothopro GmbH based inGörwihl, GERMANY
Innovative design combines plastic with metallic look. Fingerprint - ...
Manufactured by:IRIS Instruments based inOrleans, FRANCE
The Promis device is a multi-frequency, multi-spacing 3 component slingram type EM System for sounding and profiling the soil. This system features a transmitter loop to produce a primary magnetic field that will induce eddy current in conductive materials. These eddy currents will generate a secondary magnetic field that will be measured with the receiver loop. This system measures the in-phase ...