- Home
- Equipment
Refine by
Itc Xprt Equipment & Supplies
13 equipment items found
Manufactured by:ITC S.L based inSta. Perpetua de Mogoda, SPAIN
Turbine agitator exclusively designed by ITC with 6 spouts, three of them radial with a centrifugal movement to produce a rotation of liquid, and three of them axial to stir the bottom. Turbine mixer for tanks up to 200 ...
Manufactured by:ITC S.L based inSta. Perpetua de Mogoda, SPAIN
Turbine mixer for tanks up to 800 litres. Turbine agitator exclusively designed by ITC with 6 spouts, three of them radial with a centrifugal movement to produce a rotation of liquid, and three of them axial to stir the ...
Manufactured by:ITC S.L based inSta. Perpetua de Mogoda, SPAIN
FERTIC is a hydraulic pump for dosing liquid or soluble fertilizers dissolution, for their injection into the irrigation system. It is completely compact, with no other outer elements than the connection hoses, and it does not cause any pressure loss in the irrigation pipes. The FERTIC pump can be automated by means of a programmer which acting on an electrovalve, opens or closes the ...
Manufactured by:AWILA Anlagenbau GmbH based inLastrup, GERMANY
AWILA premix infeed screws are an essential component of solid substrate dosing systems in biogas plants. They are used for unloading push floors and vertical mixers and convey the materials to mixing tanks or directly to the digester. Due to the high demands placed on them, all screw conveyors are manufactured from corrosion-resistant stainless steel and are fully liquid-tight. AWILA transverse, ...
Manufactured by:AWILA Anlagenbau GmbH based inLastrup, GERMANY
AWILA push floor and pull floor technology allows simple and safe mechanical discharge from large bunkers. For delivery of solid, non-flowing substrates such as renewable raw materials, manure, waste products or similar biomass to the mixer or digester. AWILA supplies concrete push floors (bunkers) up to 120 m³ with two hydraulic pushing units, robust steel push floors up to 80 m³ and ...
Manufactured by:AWILA Anlagenbau GmbH based inLastrup, GERMANY
The AWILA S 102 and S 150 pipe conveyors offer ideal conveyor performance in horizontal or ascending transport of grain, fertilisers, flour, powders and granules. They are available in three models: painted sheet steel for indoor applications, galvanised sheet steel for outdoor applications and stainless steel for transporting aggressive products and for the food sector. The pipe conveyor for ...
Manufactured by:AWILA Anlagenbau GmbH based inLastrup, GERMANY
AWILA receiving pits are widely used in silo facilities and processing plants and are known for their extremely robust, adaptable design with consistently high throughputs of up to 500 t/h. Optional dust collection fins provide good dust control. Our robustly built and low-wear trough chain conveyors and screw conveyors carry out transport for reception, for distribution to individual silo cells ...
Manufactured by:AWILA Anlagenbau GmbH based inLastrup, GERMANY
AWILA’s individual silo solutions are designed to meet a wide range of customer requirements, from small farms to large-scale industrial facilities. AWILA grain silos are available with a diameter of 4.6 m to 32 m and a capacity of up to 20,000 t of grain in each individual hopper. The roof, walls and floor are fully galvanised for long-term corrosion resistance. The grain is fed in ...
Manufactured by:AWILA Anlagenbau GmbH based inLastrup, GERMANY
Drying of biomass for energy use is becoming increasingly important. Precise control of the drying process is essential to ensure that drying remains cost-effective. The AWILA directly heated drum drier is extremely efficient and robust. It can be heated in many ways, including waste heat which does not incur any cost. The hot drying air flows through the product and heats it, absorbing the ...
Manufactured by:AWILA Anlagenbau GmbH based inLastrup, GERMANY
The AWILA premix mixer for powders and granules delivers outstanding mix homogeneity at a mixing ratio of 1:100,000 (10 mg/kg) within just 90 seconds of mixing time (according to an iff report of 8.9.2003). Unloading gates provide fast, residue-free mixer unloading. The AWILA® premix mixer is made from stainless steel and is available with a total volume of 75 to 2000 ...
Manufactured by:AWILA Anlagenbau GmbH based inLastrup, GERMANY
The AWILA hammermill is used primarily for grinding wheat, barley, rye, triticale, maize and bulk materials of comparable hardness and produces low levels of fine dust. The bulk material drops into the milling chamber through the inlet or delivery device, passing a permanent magnet which removes pieces of metal that could damage the mill. The material to be ground is “hammered” ...
Manufactured by:AWILA Anlagenbau GmbH based inLastrup, GERMANY
The efficient and versatile AWILA trough chain conveyor has a horizontal conveying capacity of 300 t/h.tter residue removal by means of trough scrapers. It is available in three different models: painted sheet steel for indoor applications, galvanised sheet steel for outdoor applications and stainless steel for transporting aggressive products and for the food sector. Thanks to its compact ...
Manufactured by:AWILA Anlagenbau GmbH based inLastrup, GERMANY
The AWILA AWT sieve separates foreign particles and impurities from grain, maize, rice and similar bulk materials. Different coarse or fine sieve inserts are available, allowing the AWT to be used as a pre-cleaner following reception or as a pellet sieve for sifting out fine particles. The wide range of sieve inserts allows flexible adaptation to specific sieving requirements. The AWILA® ...