- Home
- Equipment
Refine by
Kcs Xprt Equipment & Supplies
56 equipment items found
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
Antenna for radio or satellite beacons. The flash and radar reflector are manufactured from reinforced fibre glass with a bend restrictor at the base The autonomous vehicles can be equipped with units for: water column profiling, chamber incubation, micro profiling over the sediment-water interface, sediment core catching, water sampling or injecting in chambers or in sediment ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
For determining the amount of water passing through a plankton net. For vertical pull only. For a horizontal pull you can also use flow meter 23.090. Diameter of propeller/counter body: 70/32 mm, length 185 mm, 5-digit counter; easy installation by a triple point connection of the nosepiece. With back-run stop for vertical ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
Made from aluminium. Opening: 30 x 15 cm, located 3 cm above the sea bed. Net bag: Mesh size 1000 µ. Net bag, length: 100 cm. Protection for net bag: Rubber plate. Dimensions: L x W x H: 160 x 570 x 22 cm. Weight: 14 ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
Application: The Epibenthic sledge is a system for sampling benthic and benthopelagic faunas. The sledge contsists of a a rectangular aluminium frame (sea water resistant) with a mesh net attached to it. When towed along the seabed, its weight scrapes into the benthos, collecting any organisms on the surface or in the first centimetres of the ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
Outer diameter. 50 cm. Length of net: 200 cm. Length, overall: 280 cm. Mesh size: 50 - 500 µ, order no. 23.020 or 20-40 µ 23.020A, please specify upon order. Inclusive net bucket ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
The pump itself is a GRUNDFOS pump made from AISI 304 stainless steel. 3 models are available: 23.570: Capacity of 18.000 liter/hour at 0 meter water column). Power supply: 230 VAC. Max. depth 60 ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
The pump itself is a GRUNDFOS pump made from AISI 304 stainless steel. 3 models are available: 23.570: Capacity of 18.000 liter/hour at 0 meter water column). Power supply: 230 VAC. Max. depth 60 ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
Adapter for Ø80 mm tubes. (Optional). Will fit on all models with quick change, (13.030). A model with 2 tubes are ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
Application: The KC HAPS Bottom corer is highly suitable for taking well defined, undisturbed samples from hard as well as soft sediments. This can be seen by a clear water phase above the sediment ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
General: The construction of the sediment trap array ensures a permantly vertical position of the sampling tubes during deployment. The steering fin (optional) and the pivot joints force the array to be held at right angle to the ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
Application: Sediment sampling with time lapsed ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
Stainless steel filtration unit. 6 x 500 ml for vacuum. The upper and under parts are manufactured from AISI 316 stainless steel and the cylindrical tubes are made of acrylic. Support for ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
Small Stainless steel water sampler: The water sampler is made of AISI 316 stainless steel with an outer diameter of 54 mm. Finish: Electro ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
Application: By lowering the equipment into the sea you can measure the depth. A maximum read-out of 9.999,9 metres allows you to enter full oceanographic depth. Resolution 0,1 ...
Manufactured by:Robotronics Inc. based inSpringville, UTAH (USA)
KC & Cruiser™ is an exciting police robot for teaching safety awareness and crime prevention. KC the German Shepherd is ideal for drawing audiences to your safety education venue while providing invaluable public exposure to your commitment to promoting safe neighborhoods and safety education for children. Audiences will be entertained and delighted when KC drives up in his Cruiser and ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
Application: The KC Water sampler is based on the Ruttner design. The KC Water sampler is suitable for taking samples in lakes, water borings, wells, ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
Application: Wheel with hinger and a flexible suspension. Built-in sensors for measuring the depth, when lowering the equipment to the sea. Needs the digital meter counter, 30.351. ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
The frame can be designed specifically for your purpose or based on our tripodal standard vehicle. Manufacturing in aluminium, steel, AISI 316 stainless steel and titanium is routine at our workshop. Floatation can be either glass spheres or foam. We offer exact weight calculations and recommend minimum buoyancy for your vehicle. ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
The rack is for use with SEBA and OTT current meters (9 mm o.d. pins) during flow measurements in streams and rivers. The rack consist of a movable part with a stirrup for holding the current meter and a fixed part with a foot and a centimeter graduated scale (5 cm indications). By operating the spring loaded handle, the current meter can be positioned at any height above the sediment and the ...
Manufactured by:KC-Denmark A/S based inSilkeborg, DENMARK
Antenna: manufactured from 2 meter Ø28mm stainless steel tube, mounted on a floatation rack with 3 pcs of powerful springs, manufactured from AISI 316 stainless steel 316. 2 ...