- Home
- Equipment
Refine by
Klinkenberg Xprt Equipment & Supplies
8 equipment items found
Manufactured by:Klinkenberg B.V. based inKrommenie, NETHERLANDS
This highly robust reducer is eminently suitable for pulverising harder agglomerates, large pieces and lumps in bulk goods. The blades can be made of stainless steel or hard types of steel. The breakers can be supplied as single or double shaft versions. The double shaft lump breaker can be optionally delivered with an additional drive. The breaker does what it is designed to do, under all ...
Manufactured by:Klinkenberg B.V. based inKrommenie, NETHERLANDS
You will regularly come across Klinkenberg’s agitated feed vessels in the pharmaceutical, foodstuffs and chemical industries. With a respectable capacity of 100 to 30,000 litres per hour to remove products with a very poor flow rate. Supremely easy to clean and disassemble, with the added possibility of weighed measurement, the agitated feed vessel is well known as a production-friendly ...
Manufactured by:Klinkenberg B.V. based inKrommenie, NETHERLANDS
Klinkenberg ribbon mixers are very efficient in operation where small quantities of additives are measured into the base batch. The product has a constant motion to produce optimum mixing. A ribbon mixer fitted with two basic shafts can greatly increase the mixing effect for shorter and more intensive mixing processes. The intensity of a double-shaft ribbon mixer is achieved due to an overlap ...
Manufactured by:Klinkenberg B.V. based inKrommenie, NETHERLANDS
A paddle mixer is highly suitable for mixing powders, pastes and sticky products. By making the paddles adjustable, you can intensify the mixing or prolong or shorten the retention time to assure a flexible process. The use of a double-shaft system makes it possible to greatly increase the mixing intensity, so that the homogeneity of the product can be achieved in a shorter ...
Manufactured by:Klinkenberg B.V. based inKrommenie, NETHERLANDS
The tubular screw conveyor does what it is designed to do, under all circumstances and with every imaginable product. For transporting powders, granulates and similar bulk materials. The tubular screw conveyors can be supplied in gas-tight versions for the transport of very fine of hazardous powders. This means that hazardous vapours and noxious odours remain inside the screw conveyor. The ...
Manufactured by:Klinkenberg B.V. based inKrommenie, NETHERLANDS
The term ‘low maintenance’ also applies to trough conveyors. The trough screw is a screw conveyor principle that is used all over the world and has an excellent price/quality ratio. Screw conveyors have a wide variety of uses, especially in the foodstuffs industry. There are angled variants from 0 to 90 degrees. With angles over 30 degrees, special covers are used to prevent the ...
Manufactured by:Klinkenberg B.V. based inKrommenie, NETHERLANDS
Over the years, Klinkenberg has amassed considerable experience of dewatering a variety of products. The result is evident in the design of our highly robust screw presses. One design is conventional, the other is a shaftless pressing screw. The capacities depend greatly on the product that is to be dewatered. Klinkenberg screw presses are used to remove the water from mixtures of solids and ...
Manufactured by:Klinkenberg B.V. based inKrommenie, NETHERLANDS
There are often applications with enormous variety in the required capacities, which means that settings of 1 in 20 or higher are needed. It also sometimes happens that the central inlet and outlet are far from each other. Klinkenberg Zaandam has resolved this by combining a large dosing screw with the fine dosing screw; the coarse dosing screw makes it possible to achieve a high dosing capacity ...