- Home
- Equipment
Refine by
Lancier Xprt Equipment & Supplies
9 equipment items found
Manufactured by:Lancier Monitoring GmbH based inMünster, GERMANY
LANCIER Monitoring's UMS display and evaluation software is the high-end cable and device monitoring solution. It combines the measured data values from all the monitoring stations, sensors and pressurization systems on a single desktop, evaluates them, localises any faults and drafts profiles and measured data ...
Manufactured by:Lancier Monitoring GmbH based inMünster, GERMANY
The mobile pressurisation system LAM 2000 is the followup model of the proven LAM 2500. It is designed as a back-up system for stationary pressurisation systems during breakdowns e.g. due to repair or maintenance ...
Manufactured by:Lancier Monitoring GmbH based inMünster, GERMANY
The FMA 200C is a highly accurate and reliable instrument to monitor pressurized cables. It may be used as a local measuring device or as an adressable sensor within the LANCIER monitoring system. The airflow measurement ispressure-independent at a range of 0 - 200 l/h. Actual values are shown at the 3 digit LC-display with a resolution of 1 l/h. The FMA 200C signalises the exceeding of ...
Manufactured by:Lancier Monitoring GmbH based inMünster, GERMANY
The monitoring station MUX 101-DW is an universal platform for the permanent surveillance of copper or fiber network and related equipment. The 16 input channels can be configured to monitor addressable transducers and/or contactors which are measured ...
Manufactured by:Lancier Monitoring GmbH based inMünster, GERMANY
The monitoring station RTU 101-IMS is used to detect the penetration of moisture in copper cables, their squeezing or damage. The readings of the 10 measurement channels, regarding insulation and loop resistance, are evaluated by the RTU 101-IMS according to individual user programmed parameters. Threshold exceedings cause automatic reports like warnings, alarms etc. to assigned receiving ...
Manufactured by:Lancier Monitoring GmbH based inMünster, GERMANY
The LANCIER Monitoring Rail-Module-Bus is a modular and robust sensor system. Several measuring modules are mounted on a DIN rail and are directly connected to one another by means of plug-in contacts. The supply voltage, data analysis and control panel as well as their transmission to the remote measuring stations are carried out via the RM-Basic ...
Manufactured by:Lancier Monitoring GmbH based inMünster, GERMANY
The Rail-Module-Bus by LANCIER Monitoring is a modular and robust sensor system. Several measuring modules are mounted on a DIN rail and are directly connected to one another by means of plug-in contacts. The RM-Basic module is the core of the new Rail-Module-Bus by LANCIER Monitoring. It takes over the energy supply of the measuring modules, shows the measurements and parameters and transmits ...
Manufactured by:Lancier Monitoring GmbH based inMünster, GERMANY
All sensor types mentioned below are connectable to the LANCIER Tx-Bus. They are applicable for a wide spectrum of ...
Manufactured by:Lancier Monitoring GmbH based inMünster, GERMANY
All sensor types mentioned below are connectable to the LANCIER Tx-Bus. They are applicable for a wide spectrum of tasks. The LANCIER Tx-Bus is a robust two-wire bus. It only requires a dedicated pair of a copper cable. Up to 127 sensors can be connected to a single pair to transmit their measurement values in assigned time slots. Due to the fact that the power supply is also provided by means of ...