- Home
- Equipment
Refine by
Lekea Xprt Equipment & Supplies
9 equipment items found
Manufactured by:Lekea - Dan Trim ApS based inUlstrup, DENMARK
A hydraulic floor scraper is normally used with woodchips. The woodchips are loaded in a container, and the floor scraper will automatically push the woodchips to the cross screw where strong screws will convey the fuel into the combustion ...
Manufactured by:Lekea - Dan Trim ApS based inUlstrup, DENMARK
Accumulation tanks available with or without insulation. Accumulation tanks with insulation have been insulated with 100mm polyurethan ...
Manufactured by:Lekea - Dan Trim ApS based inUlstrup, DENMARK
The Lekea MK series is manufactured in Denmark. The Lekea MK 45-70-90 boiler is available from 48 to 67 kWs, for feeding with small straw bales. The burner chamber is executed from 8mm steel sheet, thus ensuring a long life for the ...
Manufactured by:Lekea - Dan Trim ApS based inUlstrup, DENMARK
Normally, the heating with wood pellets requires a silo with an air injection duct and a cyclone; the pellets will slide down the transportation screw and be conveyed into the ...
Manufactured by:Lekea - Dan Trim ApS based inUlstrup, DENMARK
A hydraulic floor scraper is normally used with woodchips. The woodchips are taken to the store room, and the floor scrapers will automatically push the woodchips into the cross screw where strong screws will convey the fuel into the combustion ...
Manufactured by:Lekea - Dan Trim ApS based inUlstrup, DENMARK
Lekea-Dan Trim offers Danish-manufactured automatic biofuel combustion plants designed for industrial, agricultural, and institutional heating needs. These plants can handle various biofuels, including wood pellets, woodchips, sawdust, grains, and olive stones. The combustion plants are engineered for high durability and include features such as automatic biomass conveyance into the burner, ...
Manufactured by:Lekea - Dan Trim ApS based inUlstrup, DENMARK
The Lekea MK 160-30 boiler is designed for heating with 80x80cm straw bales. The burner chamber is manufactured from strong steel sheet and fitted with a firebrick at the top, thus ensuring the high combustion temperature and efficient fluegas combustion. The fluegas convector made from strong steel pipes transfers the heat to the water and offers the efficient utilization of the remaining heat ...
Manufactured by:Lekea - Dan Trim ApS based inUlstrup, DENMARK
Normally, a silo feeder is used when heating with woodchips. The woodchips are transported into the store room and tipped onto the silo feeder; the specially designed springs with a diameter of 2.85mtrs will move the woodchips towards the strong screw conveying the woodchips into the ...
Manufactured by:Lekea - Dan Trim ApS based inUlstrup, DENMARK
The Lekea steel chimney features an outer load-bearing casing constructed from corrosion-resistant corten steel and an insulating Isokern core, ensuring optimal insulation, corrosion resistance, and high temperature stability. The corten steel casing requires no external maintenance and is designed for easy installation. The chimney can be tailored to specific heating or boiler systems in terms ...
