- Home
- Equipment
Refine by
Luhrfilter Xprt Equipment & Supplies
9 equipment items found
Manufactured by:Luhrfilter Limited based inBurntwood, UNITED KINGDOM
The cleaning of the flat-bag rows takes place sequentially in steps by means of a cleaning device, travelling within the clean gas chamber. The cleaning air is injected into one row of the flat-bag filters by means of a medium pressure fan, while the two flat-bag rows adjacent to the cleaning row are not under the normal extraction IE Isolated durring the cleaning process. A lip seal along the ...
Manufactured by:Luhrfilter Limited based inBurntwood, UNITED KINGDOM
This unit is in the form of a vertical cylindrical vessel into which spray nozzles are inserted. The spray nozzles are used to inject atomised water droplets into the process gas. Water is atomised in the spray nozzles using either compressed gas or air. The evaporative cooler can be used to cool process gases from 800 deg. C whilst the Flat Tube Heat Exchanger has a maximum inlet temperature of ...
Manufactured by:Luhrfilter Limited based inBurntwood, UNITED KINGDOM
LUEHR fixed bed / mobile bed adsorbers are used for the adsorption of gaseous pollutants such ...
Manufactured by:Luhrfilter Limited based inBurntwood, UNITED KINGDOM
The cleaning of the flat-bag rows takes place sequentially in steps by means of a cleaning device, travelling within the clean gas chamber. The cleaning air is injected into one row of the flat-bag filters by means of compressed air, while the two flat-bag rows adjacent to the cleaning row are not under the normal extraction IE Isolated durring the cleaning process. A lip seal along the carriage ...
Manufactured by:Luhrfilter Limited based inBurntwood, UNITED KINGDOM
The Flat Tube Heat Exchanger is an air to air heat exchanger operating on the principle of forced draught convection. Process gases pass over the outside surfaces of the heat exchanger elements. Cooling air is generated from ambient air by axial or centrifugal fans and blown along the bores of the heat exchanger elements thus promoting the exchange of ...
Manufactured by:Luhrfilter Limited based inBurntwood, UNITED KINGDOM
Luhr Conditioning Rotor (patented) and Dust Re-circulation Systems: Conditioning rotors are installed as part of dust re-circulation systems. A proportion of the collected dust is returned to the inlet of the plant where it is fed into incoming gas stream then into the conditioning ...
Manufactured by:Luhrfilter Limited based inBurntwood, UNITED KINGDOM
The design features of the horizontally or vertically installed flat-bag filter elements especially in combination with the different -off line- cleaning systems included in the range of products allow: the reliable observance of requested residual particle contents in the clean gas, long filter fabric service lives, at low space requirement and low maintenance. Flat-bag filters are used for gas ...
Manufactured by:Luhrfilter Limited based inBurntwood, UNITED KINGDOM
The cleaning of the flat-bag rows takes place sequentially in steps by means of a cleaning controller or PLC, The clean Chamber is provided with vertically mounted compressed air injectors, arranged in front of each row of filter bags. Compressed air and secondary clean gas air is injected into two adjacent bag rows. Injector tubes are designed in accordance with aerodynamic principles. The bag ...
Manufactured by:Luhrfilter Limited based inBurntwood, UNITED KINGDOM
This cleaning process uses compartmentalisation of the filter housing clean gas chamber. Each chamber is connected with the clean gas collective channel and can be isolated. At the beginning of the cleaning process in one chamber, the corresponding isolation damper on the clean gas side will be closed. The flat bags are cleaned during interrupted filtration process by means of compressed air ...