- Home
- Equipment
Refine by
Meccanica Xprt Equipment & Supplies
68 equipment items found
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The TANDEM technology applied to the recycling of heavily printed, contaminated and high humidity plastic materials guarantees the excellent quality of the granule with a notable energy savings in comparison with conventional recycling systems that foresee the re-extrusion of the material. The plant is composed of a COMPAC unit and two extruders arranged in succession. The short, non-vented ...
Manufactured by:Meccanica Benassi S.p.a. based inTerre del Reno (Ferrara), ITALY
Engine loncin Loncin 152F kW 1,7 (2,3 HP) gasoline. Recoil starter. Transmission chain in a opening steel housing. Gearbox monospeed. Clutch by belt with stretcher. Handlebars adjustable in height. Tiller cms.50 with side discs. Tiller protection cover. Front travel wheel ...
Manufactured by:Meccanica Benassi S.p.a. based inTerre del Reno (Ferrara), ITALY
ENGINE: Loncin G200F kW 4,1 (HP 5,6) gasoline. Honda GP200 kW 4,1 (HP 5,6) gasoline. Loncin LC178F kW 5,5 (HP 7,5) diesel electric ...
Manufactured by:Meccanica Benassi S.p.a. based inTerre del Reno (Ferrara), ITALY
ENGINE : Briggs & Stratton series 3105 kW 5,8 (HP 7,9) gasoline, with recoil ...
Manufactured by:Meccanica Cremonini s.n.c. based inRoncoferraro, ITALY
Motor clutch sets can be used for all those applications where it is necessary to activate and deactivate the motion of the engine as for the following applications: vertical pumps, centrifugal and self-priming pumps, mills, agricultural dryers, oil mills and ...
Manufactured by:Meccanica Cremonini s.n.c. based inRoncoferraro, ITALY
The Multifunctional Combined Units (Combi-Power) has been studied and designed in order to work in different industrial sectors, i.e. agricolture, research and development, territorial safety and emergency. It can be built on fixed base or on wheeled framework, it can be installed directly on movable bases such as pivot systems or hose-reel irrigators. It’s flexible because it can be used ...
Manufactured by:Meccanica Cremonini s.n.c. based inRoncoferraro, ITALY
They are built on steel bent bases with incorporated tank, the unit motor/generator is fixed through anti-vibration dampers, it is equipped with a collecting tub, oil extraction pump, oil heater, battery box, cables and water tight box for servorelé with terminals. The engine is joined to the flywheel with a bell through lamellar ...
Manufactured by:Meccanica Benassi S.p.a. based inTerre del Reno (Ferrara), ITALY
ENGINE: Briggs & Stratton series 3105 kW 5,8 (HP 7,9) gasoline, recoil ...
Manufactured by:Meccanica Benassi S.p.a. based inTerre del Reno (Ferrara), ITALY
ENGINE: Loncin G200F kW 4,1 (5,6 HP) gasoline. RECOIL STARTER. TRANSMISSION: chain in a opening steel ...
Manufactured by:Meccanica Benassi S.p.a. based inTerre del Reno (Ferrara), ITALY
ENGINE : WM168FB kW 3,4 (HP 4,6) gasoline. MECHANICAL TRANSMISSION: With gears in oil bath. GEARBOX: 6 speeds forward + 2 ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
Gamma Meccanica SpA is specialized in the production of technological lines for the regeneration of plastic materials in plastic recycling plants. The consolidated experience and core competencies combined with a high level of technical solutions enable the company to meet the growing needs of international markets and to offer customized solutions for each ...
Manufactured by:Meccanica Benassi S.p.a. based inTerre del Reno (Ferrara), ITALY
ENGINE: Loncin G200F kW 4,1 (HP 5,5) gasoline. Honda GP200 kW 4,1 (HP 5,5) gasoline. Loncin LC178F kW 5,5 (HP 7,5) diesel electric ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
Ceiling tiles market in the last years grow up and changed is trend: the old standard ceiling tiles panel (made by a mix of cement and fiber) are now replaced by a new generation product (made by mineral wool) more easy to produce and effective as thermal and acoustic insulation , preserving the Aesthetics & Design. For this reason Gamma Meccanica propose this line: easy to install and ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The conventional regeneration lines are ideal for the recycling of plastics that foresee the use of a granulator. It can be also equipped with our FORCE FEED system complete with storage silo, single or dual auger configuration for ground rigid materials, film and foam flake. This type of line is available in different models depending on the production capacity. Every line can be customized upon ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The pelletizer system completes the recycling process: this is the final part of the plant. The recycled material comes out of the die plate in form of “spaghetti” and it is “cut” by a series of rotating blades into small cylinders which are cooled with water and then dried in a centrifuge. During this stage, the material takes on the form of a ...
Manufactured by:Gandini Meccanica Snc based inGuidizzolo, ITALY
Reliable model of chipper, suitable for medium-sized shipyards with rapid maintenance blades. This type of chipper has been developed to solve the shredding problems in medium-size plants. The TPS version of the CHIPPER 170 line is arranged to be fitted to the 3rd point linkage of any type of tractor and powered by the PTO shaft. All the machines are equipped with a quick system for blades ...
Manufactured by:Gandini Meccanica Snc based inGuidizzolo, ITALY
Chipper a sharp angle that reduces the power consumption. Ideal for large yards pruning. The Chipper 09 is a special chipping model, which provides innovative technical characteristic. The specific inclination of the timber entering the chipping flywheel allows an easier cutting of material, reducing power and consequently fuel ...
Manufactured by:Gandini Meccanica Snc based inGuidizzolo, ITALY
The model chipper 20-40 CHIPPER ENERGY is one of those chipper machines designed by Gandini mechanics to service the forestry sector, as it is capable of producing high quality wood chips used in the energy sector. The design of the chipper CHIPPER ENERGY 23-42 was based on a system of cutting blades on the drum, while all the operations that can be performed for the production of wood chip ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The crimping machine is the special unit for fiber orientation, installed before the curing oven. By acting on the orientation of the fibers the crimping improves the mechanical characteristics of the final product. The vertical fiber orientation causes the high mechanical compressive strength and delamination strength. The tensile strength in the direction of the thickness increases from 5 to 10 ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The cutting units are used to complete the production process, cutting product to the requested size. The cutting units generally include the following groups: cutting and trimming of the lateral edges; longitudinal slitting unit; thickness band saw; cross-cutting unit. All the cutting units of Gamma Meccanica S.p.A. use the cutting blades of “no dust” type rotating at very low speed. ...